Investigation on Microstructure and Dry Sliding Wear Behavior of a Novel Fe-Cr-B-C-Al-Si-Mn Composite Coatings on 2Cr13 Steel by Laser Cladding

被引：4
|
作者：
Gu, Jian [1 ]
Li, Dongqing [1 ]
Liu, Shengchun [1 ]
Si, Jiajun [1 ]
Cai, Songlin [1 ]
Liu, Xuliang [1 ]
Liu, Peng [1 ]
Wang, Kaiming [2 ,3 ]
机构：
[1] China Elect Power Res Inst, Beijing 102401, Peoples R China
[2] Changsha Univ Sci & Technol, Coll Automobile & Mech Engn, Hunan Prov Key Lab Intelligent Mfg Technol High P, Gong1 B415 960,Sect 2,Wanjiali South Rd, Changsha 410114, Hunan, Peoples R China
[3] Tsinghua Univ, Dept Mech Engn, State Key Lab Tribol, Beijing 100084, Peoples R China
来源：
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE | 2022年 / 31卷 / 03期
关键词：
Fe-based composite coatings; laser cladding; microstructure; TEM; wear resistance; MECHANICAL-PROPERTIES; ROLLING TEMPERATURE; ALLOY; RESISTANCE; NB;
D O I：
10.1007/s11665-021-06325-8
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
A novel Fe-Cr-B-C-Al-Si-Mn composite coating was designed and synthesized on 2Cr13 steel substrate using laser cladding technique in this study. The microstructure evolution, microhardness and wear resistance of the composite coating were investigated. The results showed that the microstructure of the coating was mainly composed of alpha-(Fe,Cr,Al) martensite, retained gamma-Fe, and the eutectic comprised of CrFeB, M-3(C,B)(2), M-2(B,C) and M-23(C,B)(6). The average microhardness of the coating (742.1 HV0.5) was 3.95 times compared with the 2Cr13 steel substrate, and the wear resistance was enhanced by 12.5 times compared with the 2Cr13 steel substrate. The wear mechanisms were dominated by abrasive wear and oxidative wear.
引用
收藏
页码：2381 / 2390
页数：10
相关论文
共 50 条
  • [11] Wear behavior and microstructure of Fe-C-Si-Cr-B-Ni hardfacing alloys
    Ozturk, Zeynep Taslicukur
    MATERIALS TESTING, 2021, 63 (03) : 231 - 234
  • [12] Wear resistance of eutectic coatings of the Fe–Mn–C–B system alloyed with Si, Ni, and Cr
    M. I. Pashechko
    Materials Science, 2011, 46 : 695 - 701
  • [13] Wear behavior and microstructure of Fe-C-Si-Cr-B-Ni hardfacing alloys
    Öztürk, Zeynep Taslicukur
    Materialpruefung/Materials Testing, 2021, 63 (03): : 231 - 234
  • [14] Dry Sliding Wear Behavior of (Cr, Fe)7C3-γ(Cr, Fe) Metal Matrix Composite (MMC) Coatings: The Influence of High Volume Fraction (Cr, Fe)7C3 Carbide
    Zhou, Y. F.
    Qin, G. K.
    Jiang, P. J.
    Wang, S. F.
    Qi, X. W.
    Xing, X. L.
    Yang, Q. X.
    TRIBOLOGY LETTERS, 2018, 66 (03)
  • [15] Dry Sliding Wear Behavior of (Cr, Fe)7C3-γ(Cr, Fe) Metal Matrix Composite (MMC) Coatings: The Influence of High Volume Fraction (Cr, Fe)7C3 Carbide
    Y. F. Zhou
    G. K. Qin
    P. J. Jiang
    S. F. Wang
    X. W. Qi
    X. L. Xing
    Q. X. Yang
    Tribology Letters, 2018, 66
  • [16] Dry Sliding Wear Behavior of Fe-Ni-Mo-C-Cr Powder Sintered Structural Steel
    Chen, Hua
    Sun, Haiying
    Zhao, Zhankui
    Chai, Zhilong
    MATERIALS SCIENCE AND INFORMATION TECHNOLOGY, PTS 1-8, 2012, 433-440 : 572 - +
  • [17] Characterisation of the Microstructure of Fe-Al/Cr3C2 Composite Coatings
    Liu, Xiaoming
    Dong, Junhui
    Yang, Yuehong
    Sun, Changming
    Tuo, Ya
    Li, Yanwei
    19TH ANNUAL CONFERENCE AND 8TH INTERNATIONAL CONFERENCE OF CHINESE SOCIETY OF MICRO/NANO TECHNOLOGY (CSMNT2017), 2018, 986
  • [18] Multicriterion Assessment of Wear Resistance of Fe–Mn–C–B Eutectic Coatings Alloyed with Si, Ni, and Cr
    M. Pashechko
    J. Montusiewicz
    K. Dziedzic
    J. Jozwik
    Powder Metallurgy and Metal Ceramics, 2017, 56 : 316 - 322
  • [19] WEAR RESISTANCE OF EUTECTIC COATINGS OF THE Fe-Mn-C-B SYSTEM ALLOYED WITH Si, Ni, AND Cr
    Pashechko, M. I.
    MATERIALS SCIENCE, 2011, 46 (05) : 695 - 701
  • [20] Microstructure evolution of phase separated Fe-Cu-Cr-C composite coatings by laser induction hybrid cladding
    Dai, Xiaoqin
    Zhou, Shengfeng
    Wang, Meifeng
    Lei, Jianbo
    Wang, Chunxia
    Wang, Tao
    SURFACE & COATINGS TECHNOLOGY, 2017, 324 : 518 - 525
12345