Application of PSO-BPNN-PID Controller in Nutrient Solution EC Precise Control System: Applied Research

In this paper, we present a nutrient solution control system, designing a nutrient solution electrical conductivity (EC) sensing system composed of multiple long-range radio (LoRa) slave nodes, narrow-band Internet of Things (NB-IoT) master nodes, and a host computer, building a nutrient solution EC control model and using the particle swarm optimization (PSO) algorithm to optimize the initial weights of a back-propagation neural network (BPNN). In addition, the optimized best weights are put into the BPNN to adjust the proportional-integral-derivative (PID) control parameters Kp, Ki, and Kd so that the system performance index can be optimized. Under the same initial conditions, we input EC = 2 mS/cm and use the particle swarm optimization BP neural network PID (PSO-BPNN-PID) to control the EC target value of the nutrient solution. The optimized scale factors were Kp = 81, Ki = 0.095, and Kd = 0.044; the steady state time was about 43 s, the overshoot was about 0.14%, and the EC value was stable at 1.9997 mS/cm-2.0027 mS/cm. Compared with the BP neural network PID (BPNN-PID) and the traditional PID control approach, the results show that PSO-BPNN-PID had a faster response speed and higher accuracy. Furthermore, we input 1 mS/cm, 1.5 mS/cm, 2 mS/cm, and 2.5 mS/cm, respectively, and simulated and verified the PSO-BPNN-PID system model. The results showed that the fluctuation range of EC was 0.003 mS/cm-0.119 mS/cm, the steady-state time was 40 s-60 s, and the overshoot was 0.3%-0.14%, which can meet the requirements of the rapid and accurate integration of water and fertilizer in agricultural production.