Standard requirements of hot rolled thermo-mechanically treated reinforcement bars

被引:4
|
作者
Musonda, Vincent [1 ]
Akinlabi, Esther T. [1 ]
机构
[1] Univ Johannesburg, Dept Mech Engn Sci, Auckland Pk Kingsway Campus, ZA-2006 Johannesburg, South Africa
关键词
Microstructure; Tempered martensite; Ferrite-pearlite; Billets; Scrap; DRI; Quenching; Tempering; Hardness; UTS; C-MN; STEELS;
D O I
10.1016/j.matpr.2018.06.204
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Reinforcement bars (rebars) are thermo-mechanically treated (TMT) products with a microstructure comprising a tempered martensite at the periphery and a ferrite-pearlite structure at the core. Billets made from scrap and direct reduced iron (DRI) were hot rolled (HR) to produce TMT rebars. It has been observed that, there is correlation between hardness values, ultimate tensile strength (UTS) and microstructure of the rebars. Other findings indicate that, appropriate quenching and tempering techniques have an influence on the outcome of the mechanical properties of TMT rebars. Theresults obtained are in agreement with standard requirements for production and quality of a rebar. (c) 2018 Elsevier Ltd. All rights reserved.
引用
收藏
页码:18593 / 18602
页数:10
相关论文
共 50 条
  • [11] Corrosion Resistance Behavior of Cr–Cu Alloyed Thermo-Mechanically Treated Reinforced Bars in 3.5% NaCl Solution
    Avinash Satendra Kumar
    I. Kumar
    S. Chakradhar
    S. L. V. P Manjini
    Protection of Metals and Physical Chemistry of Surfaces, 2019, 55 : 554 - 565
  • [12] Fire residual stress-strain curves of corroded thermo-mechanically treated (TMT) reinforcing steel bars
    Tariq, Faraz
    Bhargava, Pradeep
    CANADIAN JOURNAL OF CIVIL ENGINEERING, 2023, 50 (04) : 318 - 334
  • [13] Ultra-fine-grained thermo-mechanically treated XTP® bars with high toughness for cold forming and machining
    Bambach, M. D.
    Helas, K.
    Oberli, L.
    METALLURGIA ITALIANA, 2019, (10): : 36 - 44
  • [14] Fracture toughness characteristics of thermo-mechanically rolled direct quenched and partitioned steels
    Kumar, Gaurav
    Ghosh, Sumit
    Pallaspuro, Sakari
    Somani, Mahesh C.
    Komi, Jukka K.
    Mishra, Sushil A.
    Gokhale, Amol
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2022, 840
  • [15] Ultra-fine-grained thermo-mechanically treated XTP® bars with high toughness for cold forming and machining
    Bambach, M.D.
    Helas, K.
    Oberli, L.
    Metallurgia Italiana, 2019, 111 (10): : 36 - 44
  • [16] Behavior of thermo-mechanically treated rebar exposed to elevated temperatures
    Choubey, Bishwajeet
    Kumar, Virendra
    Dutta, Sekhar Chandra
    Saikia, Saurav Kumar
    JOURNAL OF STRUCTURAL FIRE ENGINEERING, 2022, 13 (04) : 470 - 490
  • [17] Low cycle fatigue behavior of thermo-mechanically treated rebar
    Paul, Surajit Kumar
    Majumdar, S.
    Kundu, S.
    MATERIALS & DESIGN, 2014, 58 : 402 - 411
  • [18] Corrosion Resistance Behavior of Cr-Cu Alloyed Thermo-Mechanically Treated Reinforced Bars in 3.5% NaCl Solution
    Kumar, Satendra
    Kumar, Avinash
    Chakradhar, I.
    Manjini, S.
    Reddy, S. L. V. P.
    PROTECTION OF METALS AND PHYSICAL CHEMISTRY OF SURFACES, 2019, 55 (03) : 554 - 565
  • [19] An Approach to Predict Geometrically and Thermo-Mechanically Induced Stress Concentrations in Ribbed Reinforcing Bars
    Robl, Tobias
    Woelfle, Christoph Hubertus
    Hameed, Muhammed Zubair Shahul
    Rappl, Stefan
    Krempaszky, Christian
    Werner, Ewald
    METALS, 2022, 12 (03)
  • [20] Simulation based microstructural optimization of thermo-mechanically treated steel components
    Stein, T.
    Fuss, D.
    Grahlmann, P.
    Luetje, M.
    Brueckner-Foit, A.
    Steinhoff, K.
    Weidig, U.
    MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK, 2013, 44 (12) : 977 - 984