Investigation of the influence of the thickness of nanolayers in wear-resistant layers of Ti-TiN-(Ti,Cr,Al)N coating on destruction in the cutting and wear of carbide cutting tools

被引：58

作者：

Vereschaka, Alexey ^{[1
]}

Tabakov, Vladimir ^{[2
]}

Grigoriev, Sergey ^{[3
]}

Sitnikov, Nikolay ^{[4
]}

Milovich, Filipp ^{[5
]}

Andreev, Nikolay ^{[5
]}

Sotova, Catherine ^{[3
]}

Kutina, Natalya ^{[6
]}

机构：

[1] ICTI RAS, Vadkovsky Per 18-1A, Moscow 127055, Russia

[2] Ulyanovsk State Tech Univ, SevernyiVenec 32, Ulyanovsk 432027, Russia

[3] Moscow State Technol Univ STANKIN, Vadkovsky Per 1, Moscow 127994, Russia

[4] Natl Res Nucl Univ MEPhI, Moscow Engn Phys Inst, Kashirskoeshosse 31, Moscow 115409, Russia

[5] Natl Univ Sci & Technol MISIS, Leninsky Prospect 4, Moscow 119049, Russia

[6] Bauman Moscow State Tech Univ, 2 Nd Bauman St 5-1, Moscow 105005, Russia

来源：

SURFACE & COATINGS TECHNOLOGY | 2020年 / 385卷

基金：

俄罗斯科学基金会;

关键词：

Multilayered nanostructured coating; Wear; Metal cutting tool; Nanolayer; MULTILAYER COMPOSITE COATINGS; TRIBOLOGICAL PROPERTIES; DEFORMATION-BEHAVIOR; NITRIDE COATINGS; RESIDUAL-STRESS; PERFORMANCE; FILMS; MICROSTRUCTURE; ADHESION; SYSTEM;

D O I：

10.1016/j.surfcoat.2020.125402

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

The paper presents the results of the investigation into the formation of the nanolayer structure of the Ti-TiN-(Ti,Cr,Al)N coating and its influence on the thickness of coatings, their resistance to fracture in scratch testing, and the wear resistance of coated tools in turning 1045 steel. The structure of the coatings with the nanolayer thicknesses of 302, 160, 70, 53, 38, 24, 16, and 10 nm was studied using scanning electron microscopy (SEM), transmission electron microscopy (TEM), and high-resolution (HR) TEM. It is shown that the grain sizes in the nanolayers decrease to certain values with an increase in the thickness of the nanolayers, and then, with a further decrease in the nanolayer thickness, the grain sizes of the nanolayer grow as the interlayer interfaces cease to produce a restraining effect on the growth of the grains. The study found that the nanolayer thickness influenced the wear of carbide cutting tools and the pattern of fracture for the Ti-TiN-(Ti,Cr,Al)N coatings.

引用

页数：14

共 50 条

[21] Definition of Thermal Conductivity of Cemented Carbide Cutting Tools with Multilayer Wear-Resistant Coatings
Ronaldovich, Ingemansson Alexander
Alexandrovich, Bondarev Alexander
OBRABOTKA METALLOV-METAL WORKING AND MATERIAL SCIENCE, 2019, 21 (03): : 97 - 105
[22] Investigation of the Fracture and Strength of a Compound with a Carbide Base of a Wear-Resistant Ion-Plasma Vacuum-Arc Ti–N, Ti–Al–N, Ti–Al–Cr–N, and Ti–Al–Ni–N Coatings by the Scratch Testing
I. V. Blinkov
D. S. Belov
A. O. Volkhonskii
A. V. Chernogor
V. S. Sergevnin
A. P. Demirov
Journal of Friction and Wear, 2019, 40 : 171 - 178
[23] Wear behavior and cutting performance of CrAlSiN and TiAlSiN hard coatings on cemented carbide cutting tools for Ti alloys
Chang, Yin-Yu
Lai, Hsing-Ming
SURFACE & COATINGS TECHNOLOGY, 2014, 259 : 152 - 158
[24] Diffusion wear in dry cutting of Ti-6Al-4V with WC/Co carbide tools
Deng Jianxin
Li Yousheng
Song Wenlong
WEAR, 2008, 265 (11-12) : 1776 - 1783
[25] Study on tool wear mechanism and characteristics of carbide tools in cutting Ti6Al4V
Jiang, Zenghui
Wang, Linlin
Shi, Li
Wu, Yueying
Jixie Gongcheng Xuebao/Journal of Mechanical Engineering, 2014, 50 (01): : 178 - 184
[26] Cutting performance and wear mechanism of Ti(C, N)-based cermets tools in high speed cutting
School of Mechatronic Engineering, Hunan University of Science and Technology, Xiangtan 411201, China
不详
Zhongguo Youse Jinshu Xuebao, 2008, 7 (1286-1291):
[27] Influence of Thickness of Multilayered Nano-Structured Coatings Ti-TiN-(TiCrAl)N and Zr-ZrN-(ZrCrNbAl)N on Tool Life of Metal Cutting Tools at Various Cutting Speeds
Vereschaka, Alexey
Kataeva, Elena
Sitnikov, Nikolay
Aksenenko, Anatoliy
Oganyan, Gaik
Sotova, Catherine
COATINGS, 2018, 8 (01):
[28] ON DIFFUSION-PROCESSES AND WEAR OF CEMENTED CARBIDE CUTTING TOOLS WITH TI-BASED COATINGS
MINEVICH, AA
ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY, 1992, 203 : 334 - COLL
[29] Investigation of the Fracture and Strength of a Compound with a Carbide Base of a Wear-Resistant Ion-Plasma Vacuum-Arc Ti-N, Ti-Al-N, Ti-Al-Cr-N, and Ti-Al-Ni-N Coatings by the Scratch Testing
Blinkov, I. V.
Belov, D. S.
Volkhonskii, A. O.
Chernogor, A. V.
Sergevnin, V. S.
Demirov, A. P.
JOURNAL OF FRICTION AND WEAR, 2019, 40 (02) : 171 - 178
[30] Cutting performance and wear mechanism of Ti-Al-N/Al-Cr-O coated silicon nitride ceramic cutting inserts
Long, Ying
Zeng, Junjie
Wu, Shanghua
CERAMICS INTERNATIONAL, 2014, 40 (07) : 9615 - 9620

← 1 2 3 4 5 →