Darcy-Brinkman Flow Through a Corrugated Channel

被引:62
|
作者
Ng, Chiu-On [1 ]
Wang, C. Y. [2 ]
机构
[1] Univ Hong Kong, Dept Mech Engn, Hong Kong, Hong Kong, Peoples R China
[2] Michigan State Univ, Dept Math, E Lansing, MI 48824 USA
关键词
Stokes flow; Darcy-Brinkman; Corrugated channel; HEAT-TRANSFER; PLATES; WALLS; DRAG;
D O I
10.1007/s11242-010-9580-1
中图分类号
TQ [化学工业];
学科分类号
0817 ;
摘要
A perturbation analysis is carried out to the second order to give effective equations for Darcy-Brinkman flow through a porous channel with slightly corrugated walls The flow is either parallel or normal to the corrugations, and the corrugations of the two walls are either in phase or half-period out of phase The present study is based on the assumptions that the corrugations are periodic sinusoidal waves of small amplitude, and the channel is filled with a sparse porous medium so that the flow can be described by the Darcy-Brinkman model, which approaches the Darcian or Stokes flow limits for small or large permeability of the medium The Reynolds number is also assumed to be so low that the nonlinear inertia can be Ignored The effects of the corrugations on the flow are examined, quantitatively and qualitatively, as functions of the flow direction, the phase difference, and the wavelength of the corrugations, as well as the permeability of the channel It is found that the corrugations will have greater effects when it is nearer the Stokes' flow limit than the Darcian flow limit, and when the wavelength is shorter For the same wavelength and phase difference, cross flow is more affected than longitudinal flow by the corrugations Opposite effects can result from 180 out-of-phase corrugations, depending on the flow direction, the wavelength, as well as the permeability
引用
收藏
页码:605 / 618
页数:14
相关论文
共 50 条
  • [41] Entropy Production in Mixed Convection in a Horizontal Porous Channel using Darcy-Brinkman Formulation
    Tayari, Amel
    El Jery, Atef
    Magherbi, Mourad
    2014 5TH INTERNATIONAL RENEWABLE ENERGY CONGRESS (IREC), 2014,
  • [42] Response to Comments on the Article Titled 'The Starting Flow in Ducts Filled with a Darcy-Brinkman Medium'
    Wang, C. Y.
    TRANSPORT IN POROUS MEDIA, 2010, 81 (02) : 365 - 365
  • [43] SLIP-BRINKMAN FLOW THROUGH CORRUGATED CHANNEL WITH STATIONARY RANDOM MODEL
    Faltas, M. S.
    Sherief, H. H.
    Mansour, M. A.
    JOURNAL OF POROUS MEDIA, 2017, 20 (08) : 723 - 748
  • [44] CLOSED-FORM SOLUTIONS OF DARCY-BRINKMAN FLOW: COMPILATION OF EXISTING AND NEW SOLUTIONS
    Wang, C. Y.
    JOURNAL OF POROUS MEDIA, 2023, 26 (02) : 115 - 123
  • [45] Electroosmosis-modulated Darcy-Brinkman flow in sinusoidal microfluidic pipe: an analytical approach
    Rana, Amalendu
    INTERNATIONAL JOURNAL OF NUMERICAL METHODS FOR HEAT & FLUID FLOW, 2025, 35 (01) : 47 - 65
  • [46] On the Darcy–Brinkman–Boussinesq Flow in a Thin Channel with Irregularities
    Eduard Marušić-Paloka
    Igor Pažanin
    Marko Radulović
    Transport in Porous Media, 2020, 131 : 633 - 660
  • [47] Modal and non-modal linear stability analysis of plane channel flow through a Darcy-Brinkman porous medium with symmetric and asymmetric slippery walls
    Kumar, D. L. Shivaraj
    Geetha, D. L.
    Basavaraj, M. S.
    INTERNATIONAL JOURNAL OF NON-LINEAR MECHANICS, 2025, 171
  • [48] Darcy–Brinkman Micropolar Fluid Flow through Corrugated Micro-Tube with Stationary Random Model
    M. S. Faltas
    H. H. Sherief
    Marwa A. Ibrahim
    Colloid Journal, 2020, 82 : 604 - 616
  • [49] Unsteady Fluid Flow in a Darcy-Brinkman Porous Medium with Slip Effect and Porous Dissipation
    Rahman, Muhammad
    Waheed, Humma
    Turkyilmazoglu, Mustafa
    Salman Siddiqui, M.
    INTERNATIONAL JOURNAL OF MODERN PHYSICS B, 2024, 38 (09):
  • [50] Optimal sub-parametric finite element approach for a Darcy-Brinkman fluid flow problem through a circular channel using curved triangular elements
    Naidu, V. Kesavulu
    Banerjee, Dipayan
    Siddheshwar, P. G.
    Shankara
    INTERNATIONAL CONFERENCE ON ADVANCES IN MATERIALS AND MANUFACTURING APPLICATIONS (ICONAMMA-2017), 2018, 310