The role of grain boundary sliding and reinforcement morphology on the creep deformation behaviour of discontinuously reinforced composites

In this study, the role of grain boundary sliding behaviour on the creep deformation characteristics of discontinuously reinforced composites is investigated numerically together with the other influencing parameters: reinforcement aspect ratio, grain size and interfacial behaviour between the reinforcement and the matrix. The results obtained for the composites are compared with results obtained for a polycrystalline matrix material having identical grain size and morphology. The results indicate that, with sliding grain boundaries, the stress enhancement factor for the composites is much higher than the one observed for the matrix material and its value increases with increasing reinforcement aspect ratio, reduction in the matrix grain size and sliding interfacial behaviour between the reinforcement and the matrix. In the composites, the contribution of the grain boundary sliding to overall steady state creep rates occurs in a larger stress range in comparison to the matrix material. Experimentally observed higher creep exponent values or stress dependent creep exponent values for the composites could not be explained solely by the mechanism of grain boundary sliding. However, experimentally observed large scale triple point grain boundary cavitation in the composites could occur due to large grain rotations resulting from grain boundary sliding.