Investigation on microstructure characterizations and phase compositions of rapidly solidification/powder metallurgy Mg-6 wt.% Zn-5 wt.% Ce-1.5 wt.% Ca alloy

被引：14
|
作者：
Zhou, Tao [1 ]
Xia, Hua [1 ]
Yang, Mingbo [1 ]
Zhou, Zhiming [1 ]
Chen, Kang [1 ]
Hu, Jianjun [1 ]
Chen, Zhenhua [2 ]
机构：
[1] Chongqing Univ Technol, Coll Mat Sci & Engn, Chongqing 400054, Peoples R China
[2] Hunan Univ, Coll Mat Sci & Engn, Changsha 410082, Hunan, Peoples R China
来源：
JOURNAL OF ALLOYS AND COMPOUNDS | 2011年 / 509卷 / 09期
关键词：
Rapidly solidification/powder metallurgy; Mg-Zn-Ce-Ca alloy; Microstructure; Thermal property; UNDERCOOLED NICKEL-TIN; RARE-EARTH ALLOYS; MECHANICAL-PROPERTIES; DENDRITIC GROWTH; MAGNESIUM ALLOYS; Y ALLOYS; SYSTEM; BEHAVIOR;
D O I：
10.1016/j.jallcom.2010.12.133
中图分类号：
O64 [物理化学（理论化学）、化学物理学];
学科分类号：
070304 ; 081704 ;
摘要：
Rapidly solidification/powder metallurgy (RS/PM) Mg-6Zn-5Ce-1.5Ca (wt.%) alloy in form of rods has been prepared by hot extrusion with RS powders, produced via atomizing the alloy melt and subsequent splat-quenching on the water-cooled copper twin-rollers. Microstructure characterizations and phase compositions of the alloy have been investigated. The results showed that the RS/PM Mg-6Zn-5Ce-1.5Ca alloy was the characteristics of very fine grains with the size ranging from 200 to 650 nm and was composed of alpha-Mg, Mg(x)Zn(y)Ce(z) phase with a few Ca (about 1 at.%) shortened as the Mg(x)Zn(y)Ce(z)-(Ca) phase, and a small quantity of Mg(51)Zn(20) phases. The melting point of the Mg(x)Zn(y)Ce(z)-(Ca) phase in the alloy was a little higher than that of the Mg(x)Zn(y)Ce(z) phase in RS/PM Mg-6Zn-5Ce alloy, which may be due to the dissolving of Ca in it. Moreover, the atomic percentage ratio of Zn to Ce in the Mg(x)Zn(y)Ce(z)-(Ca) phase around the grain boundary was close to 1.5. (C) 2010 Elsevier B.V. All rights reserved.
引用
收藏
页码：L145 / L149
页数：5
相关论文
共 50 条
  • [31] Precipitation hardening of an Mg-5Zn-2Gd-0.4Zr (wt. %) alloy
    Li, J. H.
    Barrirero, J.
    Sha, G.
    Aboulfadl, H.
    Muecklich, F.
    Schumacher, P.
    ACTA MATERIALIA, 2016, 108 : 207 - 218
  • [32] In vitro and in vivo studies on as- extruded Mg-5.25 wt.% Zn-0.6wt.% Ca alloy as biodegradable metal
    Gu, Xuenan
    Wang, Fan
    Xie, Xinhui
    Zheng, Mingyi
    Li, Ping
    Zheng, Yufeng
    Qin, Ling
    Fan, Yubo
    SCIENCE CHINA-MATERIALS, 2018, 61 (04) : 619 - 628
  • [33] Formation of ZrO2 in coating on Mg-3 wt.%Al-1 wt.%Zn alloy via plasma electrolytic oxidation: Phase and structure of zirconia
    Lee, Kang Min
    Kim, Yeon Sung
    Yang, Hae Woong
    Park, Joo Hyun
    Ko, Young Gun
    Shin, Dong Hyuk
    MATERIALS CHARACTERIZATION, 2015, 99 : 101 - 108
  • [34] Microstructure and texture studies on twin-roll cast AZ31 (Mg-3 wt.%Al-1 wt.%Zn) alloy and the effect of thermomechanical processing
    Masoumi, M.
    Zarandi, F.
    Pekguleryuz, M.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2011, 528 (03): : 1268 - 1279
  • [35] Effect of Ca additions on microstructure and microhardness of an as-cast Mg-5.0 wt.% Al alloy
    Han, Lihong
    Hu, Henry
    Northwood, Derek O.
    MATERIALS LETTERS, 2008, 62 (03) : 381 - 384
  • [36] Homogenization treatment of Mg-6Zn-3Sn (wt.%) alloy and its effects on microstructure and mechanical properties
    Liu, Yan-hui
    Ma, Ming-long
    LI, Xing-gang
    LI, Yong-jun
    Shi, Guo-liang
    Yuan, Jia-wei
    Zhang, Kui
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2023, 33 (01) : 67 - 78
  • [37] Effects of strontium on microstructure and mechanical properties of as-cast Mg-5 wt.%Sn alloy
    Liu, Hongmei
    Chen, Yungui
    Zhao, Haofeng
    Wei, Shanghai
    Gao, Wei
    JOURNAL OF ALLOYS AND COMPOUNDS, 2010, 504 (02) : 345 - 350
  • [38] Effects of Ca addition on as-cast microstructure and mechanical properties of Mg-3Ce-1.2Mn-1Zn (wt.%) magnesium alloy
    Yang, Mingbo
    Zhang, Jia
    Guo, Tingzhang
    MATERIALS & DESIGN, 2013, 52 : 274 - 283
  • [39] On the properties of cast and powder metallurgical Cu-6Ni-1.5Si-0.15Al (wt.%) alloy
    Atapek, S. Hakan
    Bahrami, Reza
    Polat, Seyda
    Tabak, Yasemin
    Unsal, Hakan
    VACUUM, 2024, 222
  • [40] The Effect of Extrusion Temperatures on Microstructure and Mechanical Properties of Mg-1.3Zn-0.5Ca (wt.%) Alloys
    Zhang, Honglin
    Xu, Zhigang
    Kecskes, Laszlo J.
    Yarmolenko, Sergey
    Sankar, Jagannathan
    CRYSTALS, 2021, 11 (10)
12345