CHARACTERISTICS OF THE GROwTH OF THE DIRECTIONALLY SOLIDIFIED Fe-4.25% C EUTECTIC ALLOY

被引：0
|
作者：
Trepczynska-Lent, M. [1 ]
机构：
[1] Utp Univ Sci & Technol, Mech Engn Fac, Bydgoszcz, Poland
来源：
ARCHIVES OF METALLURGY AND MATERIALS | 2021年 / 66卷 / 04期
关键词：
Fe-C eutectic alloy; directional solidification; protrusion of leading phase; LAMELLAR; FE;
D O I：
10.24425/amm.2021.140142
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
The current work is dedicated to the mathematical description of a protrusion of the leading phase (cementite) over the wet-ting phase (austenite) observed during the author's experiments in previous articles. A cementite protrusion is confirmed in the directionally solidified Fe-4.25% C eutectic alloy. The protrusion is defined due to the mass balance fulfilment. A coordinate system is attached to the solid/liquid interface, which is moving with the constant growth rate v.
引用
收藏
页码：1179 / 1186
页数：8
相关论文
共 50 条
  • [31] DEFORMATION AND STABILITY OF A DIRECTIONALLY SOLIDIFIED AL-PD EUTECTIC ALLOY
    KOSSOWSKY, R
    JOHNSTON, WC
    TRANSACTIONS OF THE METALLURGICAL SOCIETY OF AIME, 1969, 245 (08): : 1826 - +
  • [32] Eutectic microstructure evolution in a directionally solidified Nb-Al alloy
    Rios, CT
    Milenkovic, S
    Caram, R
    SOLIDIFICATION AND GRAVITY 2000, 2000, 329-3 : 179 - 184
  • [33] Microstructure and microhardness of directionally solidified NiAl-W eutectic alloy
    Jian-Jun Gao
    Zhi-Long Zhao
    Lu-Feng Wei
    Kai Cui
    Lin Liu
    Rare Metals, 2020, 39 (10) : 1174 - 1180
  • [34] STRUCTURE OF DIRECTIONALLY SOLIDIFIED InSb-Sb EUTECTIC ALLOY.
    Umehara, Yoshiaki
    Koda, Shigeyasu
    Metallography, 1987, 20 (04): : 451 - 464
  • [35] Directionally Solidified Al–Cu–Si–Fe Quaternary Eutectic Alloys
    U. Büyük
    S. Engin
    H. Kaya
    E. Çadırlı
    N. Maraşlı
    Physics of Metals and Metallography, 2020, 121 : 78 - 83
  • [36] Two phases separate growth in directionally solidified Fe-4.2Ni alloy
    Feng, Zhourong
    Shen, Jun
    Min, Zhixian
    Wang, Lingshui
    Fu, Hengzhi
    MATERIALS LETTERS, 2010, 64 (16) : 1813 - 1815
  • [37] Effect of growth rate on microstructure and mechanical properties of the directionally solidified Nb-Si eutectic alloy
    Sekido, N
    Kimura, Y
    Mishima, Y
    DEFECT PROPERTIES AND RELATED PHENOMENA IN INTERMETALLIC ALLOYS, 2003, 753 : 327 - 332
  • [38] Competitive growth of leading phase and tensile properties of directionally solidified eutectic Al-Ni alloy
    Peng, Peng
    Zhang, Anqiao
    Yue, Jinmian
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2020, 773
  • [39] INFLUENCE OF GROWTH RATE ON MICROSTRUCTURE AND MICROINDENTATION HARDNESS OF DIRECTIONALLY SOLIDIFIED TIN-CADMIUM EUTECTIC ALLOY
    Cadirli, E.
    Kaya, H.
    Gunduz, M.
    SURFACE REVIEW AND LETTERS, 2009, 16 (02) : 191 - 201
  • [40] MICROSTRUCTURE AND CRYSTALLOGRAPHY OF DIRECTIONALLY SOLIDIFIED (CO,NI)-CR23C6 EUTECTIC ALLOY
    DOUBLE, DD
    ZAMBELLI, G
    JOURNAL OF MATERIALS SCIENCE, 1978, 13 (03) : 534 - 540
12345