Surface texture indicators of tool wear - A machine vision approach

There has been much research on the automated monitoring of cutting tool wear. This research has tended to focus on three main areas that attempt to quantify the cutting tool condition: monitoring of specific machine tool parameters in order to infer tool condition, direct observations made on the cutting tool; and measurements taken from the chips produced by the tool. However, considerably less work has been performed on the development of surface texture sensors that provide information on the condition of the tool employed in machining the surface. A preliminary experimental study is presented for accomplishing this texture analysis using a machine vision-based sensor system. In particular, an investigation of the condition of a two-flute end mill used in a standard face milling operation is presented. The degree of tool wear is estimated by extracting three parameters from video camera images of the machined surface. The performance of three image-processing algorithms, in estimating the tool condition, is presented: analysis of the intensity histogram; image frequency domain content; and spatial domain surface texture.