Welding characteristics of butt-welded Inconel625 plate using CO2 laser beam

被引：8
|
作者：
Vemanaboina, Harinadh [1 ,2 ]
Naidu, G. Guruvaiah [2 ]
Kumar, Golla Vinod [2 ]
Reddy, D. Ramachandra [2 ]
机构：
[1] VIT Univ, SMEC, Vellore, Tamil Nadu, India
[2] Nalla Narasimha Reddy Grp Inst, Dept Mech Engn, Hyderabad 500088, India
来源：
MATERIALS TODAY-PROCEEDINGS | 2019年 / 19卷
关键词：
Laser beam welding; Inconel625; Radiography; Distortion; Bead geometry; LASER; MICROSTRUCTURE;
D O I：
10.1016/j.matpr.2019.08.223
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Inconel weldments are widely used in automobile and structural industries. In this study, the joints of Inconel625 are made with CO2 Laser beam welding process. The experimentation is carried out with two sets of process parameters varying the laser power and estimating the response of the welded component. Radiography analysis and distortion in the weldments are carried out. Distortion is measured using the Vernier height gauge. The lower the better-quality characteristics are chosen for distortion. The welds are free from flaws and the lower heat input results in the lower distortion. (C) 2019 Elsevier Ltd. All rights reserved.
引用
收藏
页码：859 / 863
页数：5
相关论文
共 50 条
  • [41] Effect of dual beam on reduction of porosity in CO2 laser welding
    Capello, Edoardo
    Previtali, Barbara
    Proceedings of the 8th Biennial Conference on Engineering Systems Design and Analysis, Vol 4, 2006, : 771 - 780
  • [42] CO2 laser beam welding of magnesium-based alloys
    Weisheit, A
    Galun, R
    Mordike, BL
    WELDING JOURNAL, 1998, 77 (04) : 149S - 154S
  • [43] Combination welding between CO2 laser beam and MIG arc
    Makino, Y.
    Shiihara, K.
    Ashi, S.
    2001, Japan Welding Society (70):
  • [44] Mechanical characterization of CO2 laser beam butt welds of AA5083
    Ancona, A.
    Lugara, P. M.
    Sorgente, D.
    Tricarico, L.
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2007, 191 (1-3) : 381 - 384
  • [45] The Effects of Welding Speed on Microstructure and Mechanical Properties of Dissimilar Welded Joints by CO2 Laser Welding
    Taskin, Mustafa
    MATERIALS TESTING, 2014, 56 (01) : 24 - 31
  • [46] Mechanical and microstructural characteristics of the dissimilar materials butt joints by hybrid CO2 laser-gas metal arc welding
    Bang, HeeSeon
    Bang, HanSur
    Kim, YouChul
    Oh, IkHyun
    Sung, BackSub
    JOURNAL OF LASER APPLICATIONS, 2011, 23 (01)
  • [47] Experimental study on welding characteristics of CO2 laser TIG hybrid welding process
    Chen, Y. B.
    Lei, Z. L.
    Li, L. Q.
    Wu, L.
    SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2006, 11 (04) : 403 - 411
  • [48] High powder CO2 and Nd-YAG laser welding of wrought inconel 718
    Gobbi, S
    Zhang, L
    Norris, J
    Richter, KH
    Loreau, JH
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 1996, 56 (1-4) : 333 - 345
  • [49] Characteristics of ZnSe aspheric beam shaper for CO2 laser
    Ebata, K
    Shiozaki, M
    Okada, T
    Fuse, K
    Nanba, H
    LASER BEAM SHAPING II, 2001, 4443 : 125 - 134
  • [50] Measurement of beam energy absorption in CO2 laser beam welding (2nd report)
    Shida, Tomohiko
    Wakasa, Taisuke
    Tsukamoto, Susumu
    Hiraoka, Kazuo
    Welding Research Abroad, 2000, 46 (01): : 10 - 17
12345