Parametric study of stress state development during twinning using 3D finite element modeling

被引：21

作者：

Zhang, Richard Y. ^{[1
]}

Daymond, Mark R. ^{[1
]}

Holt, Richard A. ^{[1
]}

机构：

[1] Queens Univ, Dept Mech & Mat Engn, Kingston, ON K7L 3N6, Canada

来源：

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2011年 / 528卷 / 06期

关键词：

Internal stresses; Twinning; Micromechanical modeling; Finite element analysis; UNIAXIAL DEFORMATION; TEXTURED ZIRCALOY-2; COMPOSITES; ZIRCONIUM;

D O I：

10.1016/j.msea.2010.12.062

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

A deformation twinning model which simulates the characteristic twin shear and corresponding grain reorientation has been developed using a 3D finite element method. This model has been used to study how twinning affects the stress state in both the parent grain and twin, and the stress states that are energetically favorable for twinning. The component of shear stress on the twin plane and direction is primarily responsible not only for whether twinning can occur, but also the energetically favorable twin volume fraction. A map predicting twin volume fraction as a function of parent grain deviatoric stress has been developed. (C) 2011 Elsevier B.V. All rights reserved.

引用

页码：2725 / 2735

页数：11

共 50 条

[31] 3D imaging and biomechanics: Bringing 3D finite element modeling to comparative biology
Dumont, Elizabeth
Werle, Sean
Grosse, Ian
JOURNAL OF VERTEBRATE PALEONTOLOGY, 2006, 26 (03) : 57A - 57A
[32] Steady State Heat Conduction Problems of AFPMSM Using 3D Finite Element
Wahsh, S.
Shazly, J.
Yassin, A.
PROCEEDINGS OF 2016 EIGHTEENTH INTERNATIONAL MIDDLE EAST POWER SYSTEMS CONFERENCE (MEPCON), 2016, : 949 - 953
[33] The Study of Fibula Effect on Stress Distribution in Deformed Knee Joint Using 3D Finite Element Model
Lungkee, M.
Woraratsoontom, P.
Bamrungwongtaree, J.
INTERNATIONAL CONFERENCE ON POWER ELECTRONICS AND ENERGY ENGINEERING (PEEE 2015), 2015, : 179 - 182
[34] A 3D finite element study of slope reliability
Spencer, W. A.
Hicks, M. A.
NUMERICAL MODELS IN GEOMECHANICS: NUMOG X, 2007, : 539 - 543
[35] 2D and 3D Finite Element Modeling of Electrical Machines
Sabonnadiere, JC
Foggia, A
IEEE ANTENNAS AND PROPAGATION SOCIETY INTERNATIONAL SYMPOSIUM 1997, VOLS 1-4, 1997, : 1326 - 1329
[36] Development of a 3D finite element model of lens microcirculation
Ehsan Vaghefi
Duane TK Malcolm
Marc D Jacobs
Paul J Donaldson
BioMedical Engineering OnLine, 11
[37] Development of a 3D finite element model of lens microcirculation
Vaghefi, Ehsan
Malcolm, Duane T. K.
Jacobs, Marc D.
Donaldson, Paul J.
BIOMEDICAL ENGINEERING ONLINE, 2012, 11
[38] 3D Finite Element Simulation on During Shield Tunneling
Liu, Yi
Li, Ji Shun
Wang, Baolian
ADVANCES IN CIVIL ENGINEERING, PTS 1-4, 2011, 90-93 : 1950 - +
[39] The simulation of deformation distribution during ECAP using 3D finite element method
Suo, Tao
Li, Yulong
Guo, Yazhou
Liu, Yuanyong
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2006, 432 (1-2): : 269 - 274
[40] Combined Machine-Learning and Finite-Element Approach for Multiscale 3D Stress Modeling
Garcia-Teijeiro, Xavier
Rodriguez-Herrera, Adrian
SPE RESERVOIR EVALUATION & ENGINEERING, 2021, 24 (04) : 827 - 846

← 1 2 3 4 5 →