Effect of the doping level of a p-cladding layer on the performance of GaAs-AlGaAs multiquantum-well lasers

被引:5
|
作者
Chelny, AA
Kobyakova, MS
Eliseev, PG [1 ]
机构
[1] Unitary Res Inst Polyus, Moscow 117342, Russia
[2] Univ New Mexico, Ctr High Technol Mat, Albuquerque, NM 87106 USA
[3] PN Lebedev Phys Inst, Moscow 117924, Russia
关键词
diode lasers; efficiency; GaAs-AlGaAs; high doping; internal optical losses; quantum-well lasers;
D O I
10.1109/JQE.2003.821536
中图分类号
TM [电工技术]; TN [电子技术、通信技术];
学科分类号
0808 ; 0809 ;
摘要
CW performance of multiquantum-well (MQW) GaAs-AlGaAs lasers operating near 850 nm at 300 K is investigated as a function of the doping level in the p-cladding layer. Laser structures have been grown by metal-organic chemical vapor deposition using Zn diethyl as a carrier for acceptor dopant. An undoped sublayer (setback) has been introduced to separate the heavily doped part of the cladding from the mode volume. The doping level of zinc ranges from 4 x 10(17) to 6.5 X 10(18) cm(-3). Along with this increase of the doping level, the threshold current density increases from 370 to 612 A/cm(2) whereas the slope efficiency of the laser increases from 0.71 to 1.33 W/A with an improvement of the characteristic temperature constant T-0 from 150 to 250 K. At the highest level of doping, the internal quantum yield is found to be close to unity and optical losses are as low as 1.36 cm(-1). An increase of the stable single-mode output is also obtained in 3-mum-wide ridge-waveguide diodes up to similar to180 mW.
引用
收藏
页码:113 / 117
页数:5
相关论文
共 42 条
  • [41] Effect of p-doping profile on performance of strained multi-quantum-well InGaAsP/InP lasers. Experiment and modeling.
    Belenky, GL
    Reynolds, CL
    Kazarinov, RF
    Swaminathan, V
    Luryi, S
    Lopata, J
    15TH IEEE INTERNATIONAL SEMICONDUCTOR LASER CONFERENCE - CONFERENCE DIGEST, 1996, : 69 - 70
  • [42] Effect of p-doping profile on performance of strained InGaAs/InGaAsP multiple quantum well buried heterostructure laser diodes with Fe- or p/n/p-doped InP current blocking layer
    Kim, HS
    Oh, DK
    Choi, IH
    MATERIALS SCIENCE AND ENGINEERING B-SOLID STATE MATERIALS FOR ADVANCED TECHNOLOGY, 2000, 77 (02): : 202 - 206