Modified rod-in-tube for high-NA tellurite glass fiber fabrication: materials and technologies

被引:15
|
作者
Chen, Qiuling [1 ]
Wang, Hui [2 ]
Wang, Qingwei [1 ]
Chen, Qiuping [2 ]
Hao, Yinlei [3 ]
机构
[1] Henan Univ Technol, Sch Mat Sci & Engn, Zhengzhou 450007, Henan, Peoples R China
[2] Politecn Torino, Dept Appl Sci & Technol, Turin, Italy
[3] Zhejiang Univ, Dept Informat Sci & Elect Engn, Hangzhou 310003, Zhejiang, Peoples R China
基金
中国国家自然科学基金;
关键词
SILICATE-GLASSES; SENSOR;
D O I
10.1364/AO.54.000946
中图分类号
O43 [光学];
学科分类号
070207 ; 0803 ;
摘要
In this paper, we report the whole fabrication process for high-numerical aperture (NA) tellurite glass fibers from material preparation to preform fabrication, and eventually, fiber drawing. A tellurite-based high-NA (0.9) magneto-optical glass fiber was drawn successfully and characterized. First, matchable core and cladding glasses were fabricated and matched in terms of physical properties. Second, a uniform bubble-free preform was fabricated by means of a modified rod-in-tube technique. Finally, the fiber drawing process was studied and optimized. The high-NA fibers (circle divide(core), 40- 50 mu m and circle divide(cladding), 120-130 mu m) so obtained were characterized for their geometrical and optical properties. (C) 2015 Optical Society of America
引用
收藏
页码:946 / 952
页数:7
相关论文
共 8 条
  • [1] Modified rod in tube technique for fabrication of tellurite glass preforms
    Liao, Guihua
    Xing, Jianjun
    Chen, Qiuping
    Chen, Qiuling
    OPTOELECTRONIC MATERIALS, PTS 1AND 2, 2010, 663-665 : 1093 - +
  • [2] Bismuth-doped germanate glass fiber fabricated by the rod-in-tube technique
    Zhang, Ziyang
    Cao, Jiangkun
    Zheng, Jiayu
    Peng, Mingying
    Xu, Shanhui
    Yang, Zhongmin
    CHINESE OPTICS LETTERS, 2017, 15 (12)
  • [3] Bismuth-doped germanate glass fiber fabricated by the rod-in-tube technique
    张子扬
    曹江坤
    郑嘉裕
    彭明营
    徐善辉
    杨中民
    Chinese Optics Letters, 2017, 15 (12) : 70 - 74
  • [4] Fabrication of OH-free, single-mode fiber by using slurry casting and rod-in-tube method
    Yajima, Tamotsu
    Yamamoto, Jun
    Kinoshita, Yusuke
    Ishii, Futoshi
    Hirooka, Toshihiko
    Yoshida, Masato
    Nakazawa, Masataka
    IEICE ELECTRONICS EXPRESS, 2016, 13 (01): : 1 - 9
  • [5] Fabrication and Optical Properties of a Novel Seven-Core High-NA Chalcogenide Glass Fiber Based on Extrusion
    Wu Guolin
    Feng Zan
    Wang Jun
    Wang Jinjing
    Zhong Minghui
    Xu Tiesong
    Liang Xiaolin
    Xiao Jing
    Wang Xiange
    Jiao Kai
    Zhao Zheming
    Wang Xunsi
    Zhang Peiqing
    Liu Yongxing
    Dai Shixun
    Nie Qiuhua
    ACTA OPTICA SINICA, 2021, 41 (10)
  • [6] Scintillation and photoluminescence property of SiO2 cladding YAP: Ce optical fiber via modified rod-in-tube method
    Guo, Qiang
    Sun, Xinxin
    Luo, Wenyun
    Wen, Jianxiang
    Pang, Fufei
    Mou, Chengbo
    Peng, Gang-ding
    Wang, Tingyun
    OPTICAL MATERIALS EXPRESS, 2017, 7 (05): : 1525 - 1534
  • [7] Modified optical coefficient measurements using a single high-NA fiber with detection parameter changes at a tip
    Nakazawa, Haruna
    Doi, Marika
    Ogawa, Emiyu
    Arai, Tsunenori
    OPTICS IN HEALTH CARE AND BIOMEDICAL OPTICS VIII, 2018, 10820
  • [8] Yb3+-doped silica glass rod with high optical quality and low optical attenuation prepared by modified sol-gel technology for large mode area fiber
    Wang, Shikai
    Xu, Wenbin
    Wang, Fan
    Lou, Fengguang
    Zhang, Lei
    Zhou, Qinling
    Chen, Danping
    Feng, Suya
    Wang, Meng
    Yu, Chunlei
    Hu, Lili
    OPTICAL MATERIALS EXPRESS, 2017, 7 (06): : 2012 - 2022