Microstructures and mechanical properties of ductile NbTaTiV refractory high entropy alloy prepared by powder metallurgy

Refractory high-entropy alloys (RHEAs) are promising high-temperature structural materials due to their high melting point and extraordinarily high yield strength. However, their industrial application is greatly restricted due to their limited room-temperature ductility. In the present investigation, a ductile and strong single-phase NbTaTiV RHEA was synthesized by powder metallurgy method. Effects of the sintering temperature on the phase formation, microstructural evolution and the mechanical properties of the NbTaTiV RHEA were characterized. The results show that the NbTaTiV RHEA sintered at 1700 degrees C has an equiaxed single bcc phase microstructure, no obvious porosity and compositional segregation can be observed. The alloy exhibits a relatively high hardness of 510 HV, yield strength of 1.37 GPa, and compressive fracture strength of 2.19 GPa with a high fracture strain of 23% at room temperature. Typical strain softening and steady state flow occur during compressive deformation at high temperatures. During deformation at 1000 degrees C, the alloy still exhibits high yield strength of 437 MPa with a compression strain over than 40%. The outstanding mechanical properties is mainly attributed to the homogeneous and fine microstructures, and solid solution strengthening effect. It can be concluded that the powder metallurgy is a promising way for preparing ductile RHEAs with outstanding comprehensive mechanical properties. (C) 2018 Published by Elsevier B.V.