Monitoring of under deposit corrosion for the oil and gas industry: A review

被引：44

作者：

Sliem, M. H. ^{[1
]}

Fayyad, E. M. ^{[1
,5
]}

Abdullah, A. M. ^{[1
]}

Younan, N. A. ^{[2
]}

Al-Qahtani, N. ^{[1
]}

Nabhan, Fatma F. ^{[1
]}

Ramesh, A. ^{[3
]}

Laycock, N. ^{[3
]}

Ryan, M. P. ^{[4
]}

Maqbool, M. ^{[2
]}

Arora, Dhruv ^{[3
]}

机构：

[1] Qatar Univ, Ctr Adv Mat, POB 2713, Doha, Qatar

[2] Qatar Univ, Off Vice President Res & Grad Studies, POB 2713, Doha, Qatar

[3] Qatar Sci & Technol Pk, Qatar Shell Res & Technol Ctr, POB 210000, Doha, Qatar

[4] Imperial Coll London, Dept Mat, London SW7 2AZ, England

[5] Natl Res Ctr, Phys Chem Dept, POB 12622, Giza, Egypt

来源：

JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING | 2021年 / 204卷

关键词：

Under deposit; Corrosion; Sour media; Monitoring; Control; Challenges; TIME-DOMAIN REFLECTOMETRY; CARBON-STEEL; ELECTROCHEMICAL NOISE; LOCALIZED CORROSION; SENSOR; INHIBITION; SULFIDE; SPECTROSCOPY; BEHAVIOR; SYSTEMS;

D O I：

10.1016/j.petrol.2021.108752

中图分类号：

TE [石油、天然气工业]; TK [能源与动力工程];

学科分类号：

0807 ; 0820 ;

摘要：

Internal corrosion due to under deposit corrosion (UDC) is responsible for at least 20% of incidents in the oil and gas industry. As a result, over the past decade, UDC has received much attention from researchers, corrosion technologists, and failure analysts. This paper briefly presents an overview of the UDC definition and types of deposits involved, as they are related to different UDC mechanisms, focusing on the commonly used methods, techniques, and sensors used to inspect and monitor the UDC in C-steel oil and gas pipelines. Additionally, the latest mitigation strategies were discussed concisely. Finally, the article highlights the limitations of the most popular testing methods and briefly discusses future challenges in this area.

引用

页数：24

共 50 条

[31] USE OF CORROSION-INHIBITORS BY THE OIL AND GAS-INDUSTRY
DARBY, G
CIM BULLETIN, 1983, 76 (854): : 59 - 59
[32] Oil and gas industry in Norway: short review
Spiyes, M
Andreyev, OA
NEFTYANOE KHOZYAISTVO, 2005, (06): : 44 - 47
[33] Selection guidelines for corrosion resistant alloys in the oil and gas industry
Craig, B.D.
SPE Reprint Series, 1997, (46): : 143 - 149
[34] Polymeric solutions for microbiologically infuenced corrosion in the oil and gas industry
Oharriz, Osmay (ooharriz@belzona.com), 1600, NACE International (55):
[35] Polymeric Solutions for Microbiologically Infuenced Corrosion in the Oil and Gas Industry
Oharriz, Osmay
MATERIALS PERFORMANCE, 2016, 55 (03) : 42 - 45
[36] HIGHLY EFFICIENT CORROSION AND HYDROGENATION INHIBITORS FOR THE GAS AND OIL INDUSTRY
ROZENFELD, IL
FROLOVA, LV
BRUSNIKINA, VM
LEGEZIN, NE
ALTSHULER, BN
PROTECTION OF METALS, 1981, 17 (01): : 33 - 38
[37] A Bayesian network-based susceptibility assessment model for oil and gas pipelines suffering under-deposit corrosion
Dao, Uyen
Adumene, Sidum
Sajid, Zaman
Yazdi, Mohammad
Islam, Rabiul
CANADIAN JOURNAL OF CHEMICAL ENGINEERING, 2025, 103 (01): : 126 - 136
[38] A Review of Characterization and Quantification Tools for Microbiologically Influenced Corrosion in the Oil and Gas Industry: Current and Future Trends
Kannan, Pranav
Su, Shei Sia
Mannan, M. Sam
Castaneda, Homero
Vaddiraju, Sreeram
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH, 2018, 57 (42) : 13895 - 13922
[39] CORROSION IN THE OIL INDUSTRY
BRONDEL, D
EDWARDS, R
HAYMAN, A
HILL, D
MEHTA, S
SEMERAD, T
OILFIELD REVIEW, 1994, 6 (02): : 4 - 18
[40] Radio space complex for gas and oil mains corrosion monitoring
Guskov, GY
Lvovich, VA
Nesterov, VA
Petrov, NA
Tychkin, IA
3RD INTERNATIONAL CONFERENCE ON SATELLITE COMMUNICATIONS - PROCEEDINGS OF ICSC'98, VOL I, 1998, : 85 - 87

← 1 2 3 4 5 →