In-situ evaluation of Luders band associated with martensitic transformation in a medium Mn transformation-induced plasticity steel

被引:66
|
作者
Wang, X. G. [1 ,2 ]
Wang, L. [3 ]
Huang, M. X. [2 ,4 ]
机构
[1] Hunan Univ, Coll Mech & Vehicle Engn, State Key Lab Adv Design & Mfg Vehicle Body, Changsha 410082, Hunan, Peoples R China
[2] Univ Hong Kong, Dept Mech Engn, Pokfulam Rd, Hong Kong, Hong Kong, Peoples R China
[3] Baosteel Res Inst, State Key Lab Dev and Applicat Technol Automot St, Shanghai 201900, Peoples R China
[4] Univ Hong Kong, Shenzhen Inst Res & Innovat, Shenzhen, Peoples R China
基金
中国国家自然科学基金;
关键词
Mn TRIP steel; Luders band; Martensitic transformation; DIC; Energy dissipation; AUSTENITE STABILITY; STORED ENERGY; DEFORMATION; STRAIN; PROPAGATION; BEHAVIOR; ALLOY; WORK; HEAT; NITI;
D O I
10.1016/j.msea.2016.07.054
中图分类号
TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
Full-field strain and heat source measurement were used concurrently to investigate in-situ the propagation of Luders band in a medium Mn transformation-induced plasticity (TRIP) steel. The local strain in the Luders band was provided by the full-field strain measurement while the heat source in the Luders band was estimated from temperature field. Martensitic transformation in the Luders band is studied in situ for the first time based on energy balance analysis. The combination of full-field strain and heat source measurement provides a novel and effective means to investigate in-situ the mechanism of Luders band associated with martensitic transformation. (C) 2016 Elsevier B.V. All rights reserved.
引用
收藏
页码:59 / 63
页数:5
相关论文
共 50 条
  • [21] Simultaneous Increase of Both Strength and Ductility of Medium Mn Transformation-Induced Plasticity Steel by Vanadium Alloying
    He, B. B.
    Huang, M. X.
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2018, 49A (05): : 1433 - 1438
  • [22] Simultaneous Increase of Both Strength and Ductility of Medium Mn Transformation-Induced Plasticity Steel by Vanadium Alloying
    B. B. He
    M. X. Huang
    Metallurgical and Materials Transactions A, 2018, 49 : 1433 - 1438
  • [23] TRANSFORMATION-INDUCED PLASTICITY IN STEEL FOR HOT STAMPING
    Masek, Bohuslav
    Stadler, Ctibor
    Jirkova, Hana
    Feuser, Peter
    Selig, Mike
    MATERIALI IN TEHNOLOGIJE, 2014, 48 (04): : 555 - 557
  • [24] Detection of hydrogen effusion before, during, and after martensitic transformation: Example of multiphase transformation-induced plasticity steel
    Koyama, Motomichi
    Yamasaki, Daisuke
    Ikeda, Arisa
    Hojo, Tomohiko
    Akiyama, Eiji
    Takai, Kenichi
    Tsuzaki, Kaneaki
    INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2019, 44 (47) : 26028 - 26035
  • [25] The Structure Dependence of Deformation Behavior of Transformation-Induced Plasticity–Assisted Steel Monitoring by In-Situ Neutron Diffraction
    O. Muránsky
    P. Šittner
    J. Zrnik
    E.C. Oliver
    Metallurgical and Materials Transactions A, 2008, 39 : 3097 - 3104
  • [26] Significance of control of austenite stability and transformation mechanisms in medium-manganese transformation-induced plasticity steel
    Cai, Z. H.
    Ding, H.
    Tang, Z. Y.
    Misra, R. D. K.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2016, 676 : 289 - 293
  • [27] Transmission Electron Microscopy Analysis of Yielding in Ultrafine-Grained Medium Mn Transformation-Induced Plasticity Steel
    De Cooman, Bruno C.
    Gibbs, Paul
    Lee, Seawoong
    Matlock, David K.
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2013, 44A (06): : 2563 - 2572
  • [28] Transmission Electron Microscopy Analysis of Yielding in Ultrafine-Grained Medium Mn Transformation-Induced Plasticity Steel
    Bruno C. De Cooman
    Paul Gibbs
    Seawoong Lee
    David K. Matlock
    Metallurgical and Materials Transactions A, 2013, 44 : 2563 - 2572
  • [29] Nanoindentation investigation on the mechanical stability of individual austenite grains in a medium-Mn transformation-induced plasticity steel
    He, B. B.
    Huang, M. X.
    Liang, Z. Y.
    Ngan, A. H. W.
    Luo, H. W.
    Shi, J.
    Cao, W. Q.
    Dong, H.
    SCRIPTA MATERIALIA, 2013, 69 (03) : 215 - 218
  • [30] Transformation-Induced Microcracks and Their Arrest with Different Deformation Temperatures in a Medium Mn Steel
    Yutao Zhou
    Motomichi Koyama
    Tomohiko Hojo
    Saya Ajito
    Eiji Akiyama
    Metallurgical and Materials Transactions A, 2023, 54 : 153 - 166