21.1 % EFFICIENT PERC SILICON SOLAR CELLS ON LARGE SCALE BY USING IN-LINE SPUTTERING FOR METALLIZATION

被引：0

作者：

Reinwand, Dirk ^{[1
]}

Specht, Jan ^{[1
]}

Stuewe, David ^{[1
]}

Seitz, Sonja ^{[1
]}

Nekarda, Jan-Frederik ^{[1
]}

Biro, Daniel ^{[1
]}

Preu, Ralf ^{[1
]}

Trassl, Roland ^{[2
]}

机构：

[1] Fraunhofer Inst Solar Energy Syst ISE, Heidenhofstr 2, D-79110 Freiburg, Germany

[2] Appl Mat GmbH & Co KG, D-63755 Alzenau, Germany

来源：

35TH IEEE PHOTOVOLTAIC SPECIALISTS CONFERENCE | 2010年

关键词：

SERIES RESISTANCE; CONTACTS;

D O I：

暂无

中图分类号：

TE [石油、天然气工业]; TK [能源与动力工程];

学科分类号：

0807 ; 0820 ;

摘要：

This work presents the first results for the production of highly efficient solar cells with industrial processes using the PERC structure. Two batches of FZ and Cz wafers were conducted to prove the applicability of a transfer from the clean room to an industrial standard. The front and rear side metallization was done by a new pilot system using the sputtering technology [1] The investigation of solar cell results, series resistance, contact resistance and a optical analysis are discussed later on.

引用

页数：1

共 50 条

[21] Advanced diffusion system for low contamination in-line rapid thermal processing of silicon solar cells
Biro, D
Preu, R
Schultz, O
Peters, S
Huljic, DM
Zickermann, D
Schindler, R
Lüdemann, R
Willeke, G
SOLAR ENERGY MATERIALS AND SOLAR CELLS, 2002, 74 (1-4) : 35 - 41
[22] Local rear contacts to silicon solar cells by in-line high-rate evaporation of aluminum
Mader, Christoph
Mueller, Jens
Eidelloth, Stefan
Brendel, Rolf
SOLAR ENERGY MATERIALS AND SOLAR CELLS, 2012, 107 : 272 - 282
[23] EFFECTS OF TARGET STRUCTURE ON THE PROPERTIES OF MO RECORDING MEDIA PRODUCED IN A LARGE-SCALE VERTICAL IN-LINE SPUTTERING SYSTEM
SCHULTHEISS, E
BRAUER, G
WIRZ, P
SCHITTNY, S
BERCHTHOLD, LA
SHIEH, HPD
IEEE TRANSACTIONS ON MAGNETICS, 1988, 24 (06) : 2772 - 2774
[24] The challenge of screen printed Ag metallization on nano-scale poly-silicon passivated contacts for silicon solar cells
Jiang, Lin
Song, Lixing
Yan, Li
Becht, Gregory
Zhang, Yi
Matthias, Hoerteis
NANOENGINEERING: FABRICATION, PROPERTIES, OPTICS, AND DEVICES XIV, 2017, 10354
[25] Towards ink-jet printed fine line front side metallization of crystalline silicon solar cells
Gizachew, Y. T.
Escoubas, L.
Simon, J. J.
Pasquinelli, M.
Loiret, J.
Leguen, P. Y.
Jimeno, J. C.
Martin, J.
Apraiz, A.
Aguerre, J. P.
SOLAR ENERGY MATERIALS AND SOLAR CELLS, 2011, 95 : S70 - S82
[26] Comparison of batch and in-line PECVD of a-Si:H passivation layers for silicon heterojunction solar cells
Landheer, Kees
Kaiser, Monja
Poulios, Ioannis
Dorenkamper, Maarten
Soppe, Wim J.
Schropp, Ruud E. I.
Rath, Jatin K.
PHYSICA STATUS SOLIDI-RAPID RESEARCH LETTERS, 2016, 10 (10): : 725 - 729
[27] Series Resistance Modeling of Complex Metallization Geometries of Solar Cells using Conductive Line Decomposition
Wong, Johnson
Mueller, Thomas
Sridharan, Ranjani
Zhang, Xueling
Yang, Yang
Feng, Zhiqiang
Huang, Qiang
Verlinden, Pierre
Aberle, Armin G.
2012 38TH IEEE PHOTOVOLTAIC SPECIALISTS CONFERENCE (PVSC), 2012,
[28] A new approach: low cost masking material and efficient copper metallization for higher efficiency silicon solar cells
Balucani, Marco
Kholostov, Konstantin
Klyshko, Aliaksei
Pagliucci, Roberto
Bemardi, Dario
Serenelli, Luca
Izzi, Massimo
Tucci, Mario
2015 IEEE 42ND PHOTOVOLTAIC SPECIALIST CONFERENCE (PVSC), 2015,
[29] Texture engineering of mono-crystalline silicon via alcohol-free alkali solution for efficient PERC solar cells
Zhang, Danni
Chen, Jiawang
Jia, Rui
Gao, Zhibo
Tao, Ke
Wang, Longjie
Ge, Huayun
Li, Xinpu
Li, Xing
JOURNAL OF ENERGY CHEMISTRY, 2022, 71 : 104 - 112
[30] Ultra high-rate ETP deposited silicon nitride for >15% in-line processed multicrystalline silicon solar cells
van Erven, AJM
Bosch, RCM
Toelle, R
Voigt, O
Petri, S
Bijker, MD
CONFERENCE RECORD OF THE THIRTY-FIRST IEEE PHOTOVOLTAIC SPECIALISTS CONFERENCE - 2005, 2005, : 947 - 950

← 1 2 3 4 5 →