Tribological Properties of Copper-Titanium Polymetals Obtained by the Additive Manufacturing

被引：0
|
作者：
Gurianov, D. A. [1 ]
Khoroshko, E. S. [1 ]
Gusarova, A. V. [1 ]
Chumaevskii, A. V. [1 ]
机构：
[1] RAS, SB, Inst Strength Phys & Mat Sci, Tomsk 634055, Russia
来源：
PROCEEDINGS OF THE INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS WITH HIERARCHICAL STRUCTURE FOR NEW TECHNOLOGIES AND RELIABLE STRUCTURES 2019 | 2019年 / 2167卷
关键词：
MECHANICAL-PROPERTIES; SINGLE-CRYSTALS; MICROSTRUCTURE; BEHAVIOR; ALLOY;
D O I：
10.1063/1.5131996
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The structure and tribological properties of polymetallic products from Cu-Ti system are investigated. The results of the work show that in the material obtained by successive deposition of titanium and copper filaments on the substrate, a complex structure is formed from a mixture of intermetallic phases with different composition. Friction tests show high tribological properties paired with a steel counterbody. Besides the hardened state associated with the presence of Cu4Ti intermetallic particles, the material of the samples is characterized by the plasticity preservation of the copper matrix, which increases the tribological properties of the finished product.
引用
收藏
页数：4
相关论文
共 50 条
  • [31] EFFECT OF THE SUPPORT ON THE COPPER STATE IN COPPER-TITANIUM OXIDATION CATALYSTS
    PETKEVICH, TS
    MOSTOVAYA, LY
    EGIAZAROV, YG
    KOVALENKO, NA
    STUDIES IN SURFACE SCIENCE AND CATALYSIS, 1993, 75 : 2115 - 2118
  • [32] Defect Formation in Titanium Samples Obtained by Electron Beam Additive Manufacturing
    Gusarova, A. V.
    Khoroshko, E. S.
    PROCEEDINGS OF THE INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS WITH HIERARCHICAL STRUCTURE FOR NEW TECHNOLOGIES AND RELIABLE STRUCTURES 2019, 2019, 2167
  • [33] Tribological Properties of the Lubricant Containing Titanium Dioxide Nanoparticles as an Additive
    Ilie, Filip
    Covaliu, Cristina
    LUBRICANTS, 2016, 4 (02)
  • [34] The tribological properties of nano-titanium obtained by hydrostatic extrusion
    Garbacz, Halina
    Gradzka-Dahlke, Malgorzata
    Kurzydlowski, Krzysztof J.
    WEAR, 2007, 263 : 572 - 578
  • [35] Investigation of the structural and optical properties of copper-titanium oxide thin films produced by changing the amount of copper
    Horzum, Seyda
    Gurakar, Sibel
    Serin, Tulay
    THIN SOLID FILMS, 2019, 685 : 293 - 298
  • [36] Additive Manufacturing of Titanium Alloys: Processability, Properties, and Applications
    Mosallanejad, Mohammad Hossein
    Abdi, Ata
    Karpasand, Farshid
    Nassiri, Navid
    Iuliano, Luca
    Saboori, Abdollah
    ADVANCED ENGINEERING MATERIALS, 2023, 25 (24)
  • [37] Preparation of heterogenous copper-titanium oxides for chemiresistor applications
    Torrisi, A.
    Horak, P.
    Vacik, J.
    Cannavo, A.
    Ceccio, G.
    Yatskiv, R.
    Kupcik, J.
    Fara, J.
    Fitl, P.
    Vlcek, J.
    Vrnata, M.
    MATERIALS TODAY-PROCEEDINGS, 2020, 33 : 2512 - 2516
  • [38] Fabrication of copper-titanium powders prepared by mechanical alloying
    Guwer, A.
    Nowosielski, R.
    Borowski, A.
    Babilas, R.
    INDIAN JOURNAL OF ENGINEERING AND MATERIALS SCIENCES, 2014, 21 (03) : 265 - 271
  • [39] SORPTION OF AMMONIA BY COPPER-TITANIUM CHLORIDE FILMS.
    Kol'tsov, S.I.
    Kurashvili, S.E.
    Dobruskin, V.Kh.
    1600, (58):
  • [40] The influence of carbon on the phases in the copper-titanium system and their precipitation
    Anders E. W. Jarfors
    Journal of Materials Science, 1999, 34 : 4533 - 4544
12345