AN EXTENSIVE STUDY ON LES, RANS AND HYBRID RANS/LES SIMULATION OF A NARROW-GAP OPEN TAYLOR-COUETTE FLOW

被引:0
|
作者
Friess, Christophe [1 ]
Poncet, Sebastien [1 ]
Viazzo, Stephane [1 ]
机构
[1] Aix Marseille Univ, CNRS, Ecole Cent Lab M2P2, UMR 7340, 38 Rue Frederic Joliot Curie, F-13451 Marseille 13, France
关键词
CONCENTRIC ANNULUS; TURBULENT-FLOW; INNER CYLINDER; HEAT-TRANSFER; ROTATION; CLOSURE; MODEL; WALL;
D O I
暂无
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
The present paper concerns a numerical benchmark of various turbulence modelings, from RANS to LES, applied to Taylor-Couette-Poiseuille flows in a narrow gap cavity for six different combinations of rotational and axial Reynolds numbers. Two sets of refined Large-Eddy Simulation results, using the WALE and the Dynamic Smagorinsky subgrid scale models available within an in-house code based on high-order compact schemes, hold for reference data. The efficiency of a RANS model, the Elliptic Blending Reynolds Stress Model (EB-RSM) [1], and a hybrid RANS/LES method, the so-called "Equivalent DES" [2], both run with Code Saturne, is then questioned. Thin coherent structures appearing as negative (resp. positive) spiral rolls are obtained by the LES but also the hybrid RANS/LES along the rotor (resp. stator) sides. More quantitatively, the hybrid RANS/LES does not improve the predictions of the EB-RSM for both the mean and turbulent fields, stressing the need for further theoretical development.
引用
收藏
页数:10
相关论文
共 50 条
  • [31] Hybrid RANS/LES computation of plane impinging jet flow
    Kubacki, S.
    Rokicki, J.
    Dick, E.
    ARCHIVES OF MECHANICS, 2011, 63 (02): : 117 - 136
  • [32] Hybrid RANS/LES simulations of a bluff-body flow
    Camarri, S
    Salvetti, MV
    Koobus, B
    Dervieux, A
    WIND AND STRUCTURES, 2005, 8 (06) : 407 - 426
  • [33] A COMPUTATIONAL STUDY OF JUNCTION FLOW WITH A STRAKE BY RANS AND LES
    Lin, Y.-S.
    Chen, J.-H.
    Journal of Taiwan Society of Naval Architects and Marine Engineers, 2019, 38 (02): : 69 - 81
  • [34] Study of protuberances in supersonic flow with RANS/LES method
    Chen, J. (jq-chen@263.net), 2013, Chinese Society of Astronautics (34):
  • [35] Simulation of the Flow in a Ribbed Rotating Duct with a Hybrid k-ω RANS/LES Model
    S. Kubacki
    J. Rokicki
    E. Dick
    Flow, Turbulence and Combustion, 2016, 97 : 45 - 78
  • [36] Assessment of hybrid RANS-LES formulations for flow simulation around the Ahmed body
    Guilmineau, E.
    Deng, G. B.
    Leroyer, A.
    Queutey, P.
    Visonneau, M.
    Wackers, J.
    COMPUTERS & FLUIDS, 2018, 176 : 302 - 319
  • [37] Feasibility Study of Hybrid LES/RANS Model for the Flow Over an Aerodynamic Body
    Amano, R. S.
    THMT-12. PROCEEDINGS OF THE SEVENTH INTERNATIONAL SYMPOSIUM ON TURBULENCE, HEAT AND MASS TRANSFER, 2012, : 133 - 141
  • [38] Flow Simulation of Francis Turbines Using Hybrid RANS-LES Turbulence Models
    Krappel, Timo
    Ruprecht, Albert
    Riedelbauch, Stefan
    HIGH PERFORMANCE COMPUTING IN SCIENCE AND ENGINEERING'14: TRANSACTIONS OF THE HIGH PERFORMANCE COMPUTING CENTER, STUTTGART (HLRS) 2014, 2015, : 417 - 431
  • [39] Simulation of the Flow in a Ribbed Rotating Duct with a Hybrid k-ω RANS/LES Model
    Kubacki, S.
    Rokicki, J.
    Dick, E.
    FLOW TURBULENCE AND COMBUSTION, 2016, 97 (01) : 45 - 78
  • [40] Simulation of a 3D Axisymmetric Hill: Comparison of RANS and Hybrid RANS-LES Models
    Jamal, Tausif
    Walters, D. Keith
    PROCEEDINGS OF THE ASME FLUIDS ENGINEERING DIVISION SUMMER MEETING, 2016, VOL 1B, 2016,