Experimental Study of the Small Lubrication Holes on the Die Shoulder on the Formability in Cylindrical Cup Deep-Drawing

被引：0
|
作者：
Shi, Yuqing [1 ]
机构：
[1] Zhejiang Univ Sci & Technol, Sch Mech & Automot Engn, Hangzhou 310023, Zhejiang, Peoples R China
来源：
ADVANCES IN ENGINEERING DESIGN AND OPTIMIZATION, PTS 1 AND 2 | 2011年 / 37-38卷
关键词：
Small lubrication holes; Die shoulder; Cylindrical cup; Deep drawing; Formability;
D O I：
10.4028/www.scientific.net/AMM.37-38.428
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Wrinkling and tearing are major defects that usually occur in the deep-drawing process. This study presents a new sheet forming technology, together with machining small lubrication holes on the die shoulder. Deep drawing process of cylindrical cups with flange is investigated. Mechanical characteristics of die shoulder with small lubrication holes in deep drawing are analyzed. Numerical simulation and experimental methods are used to determine the influence on formability of machining small lubrication holes on the die shoulder. The results show that this new sheet forming process can improve formability and forming quality.
引用
收藏
页码：428 / 431
页数：4
相关论文
共 50 条
  • [41] Experimental study on multi-stage deep drawing for rectangular cup with high aspect ratio
    Kang, Beom-Soo
    Ku, Tae-Wan
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2011, 53 (1-4): : 131 - 143
  • [42] New small-scale hydromechanical deep-drawing process using die-integrated active high-pressure generation system
    Kimura, Shinya
    Furushima, Tsuyoshi
    INTERNATIONAL JOURNAL OF MATERIAL FORMING, 2023, 16 (05)
  • [43] New small-scale hydromechanical deep-drawing process using die-integrated active high-pressure generation system
    Shinya Kimura
    Tsuyoshi Furushima
    International Journal of Material Forming, 2023, 16
  • [44] Analytical study and FEM simulation of the maximum varying blank holder force to prevent cracking on cylindrical cup deep drawing
    Candra, Susila
    Batan, I. Made Londen
    Berata, Wajan
    Pramono, Agus Sigit
    12TH GLOBAL CONFERENCE ON SUSTAINABLE MANUFACTURING - EMERGING POTENTIALS, 2015, 26 : 548 - 553
  • [45] PARAMETERS STUDY OF THE DEEP DRAWING CYLINDRICAL PARTS USING FINITE ELEMENT ANALYSIS AND EXPERIMENTAL VALIDATION
    Pop, Alin Florin
    Blaga, Florin Sandu
    Bungau, Constantin
    ACTA TECHNICA NAPOCENSIS SERIES-APPLIED MATHEMATICS MECHANICS AND ENGINEERING, 2022, 65 (01): : 209 - 216
  • [46] An experimental study of drilling small and deep blind holes with an abrasive water jet
    Orbanic, H
    Junkar, M
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2004, 218 (05) : 503 - 508
  • [47] Experimental study of power parameters of high-velocity warm closed-die punching of cylindrical holes
    Val'ter, A.I.
    Malenko, P.I.
    Zakharov, S.K.
    Kuznechno-Shtampovochnoe Proizvodstvo (Obrabotka Metallov Davleniem), 2002, (04): : 12 - 14
  • [48] Study on deep drawing law of the cylindrical part with prefabricate-holes based on inverse finite element method and forward finite element method
    Tan, Liguang
    Xiao, Xiaoting
    Wen, Huadian
    Chen, Qiaoyu
    PROGRESS IN CIVIL ENGINEERING, PTS 1-4, 2012, 170-173 : 3086 - 3090
  • [49] Design of a novel cold expansion tool for deep small holes based on FEM simulations and experimental study
    Wang, Jiachen
    Lei, Xuelin
    Zeng, Fei
    Li, Wei
    He, Cenyao
    Cheng, Lvyi
    Zhang, Xiancheng
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2024, 130 (9-10): : 4933 - 4949
  • [50] Design of a novel cold expansion tool for deep small holes based on FEM simulations and experimental study
    Jiachen Wang
    Xuelin Lei
    Fei Zeng
    Wei Li
    Cenyao He
    Lvyi Cheng
    Xiancheng Zhang
    The International Journal of Advanced Manufacturing Technology, 2024, 130 : 4933 - 4949
12345