EFFECT OF PRE-STRAINING ON THE SPRINGBACK BEHAVIOR OF THE AA5754-0 ALLOY

被引:0
|
作者
Toros, Serkan [1 ]
Alkan, Mahmut [1 ]
Ece, Remzi Ecmel [1 ]
Ozturk, Fahrettin [1 ]
机构
[1] Nigde Univ, Dept Mech Engn, TR-51245 Nigde, Turkey
来源
MATERIALI IN TEHNOLOGIJE | 2011年 / 45卷 / 06期
关键词
pre-straining; springback; Al-Mg alloy; AA5754-0; alloy; PREDICTING SPRINGBACK; ALUMINUM-ALLOYS; ENERGY APPROACH; METAL SHEETS; SIMULATION; MODEL; DESIGN;
D O I
暂无
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
This study presents the effect of pre-straining on the springback behavior of the AA5754-0 aluminum-magnesium (Al-Mg) alloy sheet under V bending by an experimental and finite-element simulation studies. Pre-straining ranges from 0 To to 11 % were applied to the samples, which were bent on a 60 degrees V-shaped die for the springback evaluation. Commercially available finite-element software, ETA/Dynaform, was used to simulate the 60 degrees V-die bending process. The dynamic explicit finite-element method for pressing and the static implicit finite-element method for the unloading phase were used for the simulations. The results from both the experiment and the simulation indicate that the pre-straining has no positive effect on the springback compensation.
引用
收藏
页码:613 / 618
页数:6
相关论文
共 50 条
  • [41] The effect of pre-straining and pre-ageing on a novel thermomechanical treatment for improving the mechanical properties of AA2139 aerospace aluminium alloys
    Bakare, F.
    Alsubhi, Y.
    Ragkousis, A.
    Ebomwonyi, O.
    Damisa, J.
    Okunzuwa, S.
    MATERIALS RESEARCH EXPRESS, 2017, 4 (07):
  • [42] Influence of pre-straining on creep behaviors of Mg-2Y alloy sheets
    Xiao, Zhenyu
    Huo, Qinghuan
    Zhang, Zhirou
    Huang, Weiying
    Luo, Lu
    Zhang, Yuxiu
    Hashimoto, Aki
    Yang, Xuyue
    JOURNAL OF ALLOYS AND COMPOUNDS, 2019, 806 : 19 - 32
  • [43] Synergic effect of hot deformation temperature and pre-straining on ageing precipitates and mechanical property of 2014 Al alloy
    Chen, Songyi
    Li, Fushan
    Chen, Kanghua
    Huang, Lanping
    Peng, Guosheng
    MATERIALS CHARACTERIZATION, 2020, 167
  • [44] Enhancement of mechanical properties and corrosion resistance of magnesium alloy sheet by pre-straining and annealing
    He, Junjie
    Jiang, Bin
    Zhang, Jianyue
    Xiang, Qing
    Xia, Xiangsheng
    Pan, Fusheng
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2015, 647 : 216 - 221
  • [45] The effect of pre-straining at intermediate temperatures on the mechanical behavior of high-bainite dual phase (HBDP) steels
    Farnoush, Hamidreza
    Fatmehsari, Davoud Haghshenas
    Ekrami, Aliakbar
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2012, 543 : 224 - 230
  • [46] Numerical study of springback using the split-ring test for an AA5754 aluminum alloy
    Laurent, H.
    Greze, R.
    Oliveira, M. C.
    Menezes, L. F.
    Manach, P. Y.
    Alves, J. L.
    FINITE ELEMENTS IN ANALYSIS AND DESIGN, 2010, 46 (09) : 751 - 759
  • [47] Combined effect of pre-straining and pre-aging on bake-hardening behavior of an Al-0.6mass%Mg-1.0mass%Si alloy
    Masuda, Tetsuya
    Takaki, Yasuo
    Sakurai, Takeo
    Hirosawa, Shoichi
    Keikinzoku/Journal of Japan Institute of Light Metals, 2010, 60 (02):
  • [48] Combined effect of pre-straining and pre-aging on bake-hardening behavior of an Al-0.6 mass % Mg-1.0 mass % Si alloy
    Masuda T.
    Takaki Y.
    Sakurai T.
    Hirosawa S.
    Keikinzoku/Journal of Japan Institute of Light Metals, 2010, 60 (04): : 183 - 189
  • [49] Combined Effect of Pre-Straining and Pre-Aging on Bake-Hardening Behavior of an Al-0.6 mass%Mg-1.0 mass%Si Alloy
    Masuda, Tetsuya
    Takaki, Yasuo
    Sakurai, Takeo
    Hirosawa, Shoichi
    MATERIALS TRANSACTIONS, 2010, 51 (02) : 325 - 332
  • [50] Effect of pre-straining treatment on high temperature creep behavior of Ni-based single crystal superalloys
    Long, Haibo
    Mao, Shengcheng
    Liu, Yinong
    Wei, Hua
    Deng, Qingsong
    Chen, Yanhui
    Zhang, Ze
    Han, Xiaodong
    MATERIALS & DESIGN, 2019, 167