Performance improvement of a drop-on-demand inkjet printhead using an optimization-based feedforward control method

被引：61

作者：

Khalate, Amol A. ^{[1
]}

Bombois, Xavier ^{[1
]}

Babuska, Robert ^{[1
]}

Wijshoff, Herman ^{[2
]}

Waarsing, Rene ^{[2
]}

机构：

[1] Delft Univ Technol, Delft Ctr Syst & Control, NL-2628 CD Delft, Netherlands

[2] Oce Technol BV, NL-5900 MA Venlo, Netherlands

来源：

CONTROL ENGINEERING PRACTICE | 2011年 / 19卷 / 08期

关键词：

Inkjet printhead; Feedforward control; Optimization;

D O I：

10.1016/j.conengprac.2011.02.007

中图分类号：

TP [自动化技术、计算机技术];

学科分类号：

0812 ;

摘要：

The printing quality delivered by a drop-on-demand (DoD) inkjet printhead is limited due to the residual oscillations in the ink channel. The maximal jetting frequency of a DoD inkjet printhead can be increased by quickly damping the residual oscillations and by bringing in this way the ink channel to rest after jetting the ink drop. This paper proposes an optimization-based method to design the input actuation waveform for the piezo actuator in order to improve the damping of the residual oscillations. A discrete-time transfer function derived from the narrow-gap model is used to predict the response of the ink channel under the application of the piezo input. Simulation and experimental results are presented to show the applicability of the proposed method. (C) 2011 Elsevier Ltd. All rights reserved.

引用

页码：771 / 781

页数：11

共 50 条

[41] Effect of Process Parameters on the Performance of Drop-On-Demand 3D Inkjet Printing: Geometrical-Based Modeling and Experimental Validation
Elkaseer, Ahmed
Schneider, Stella
Deng, Yaqi
Scholz, Steffen G.
POLYMERS, 2022, 14 (13)
[42] Stabilizing Meniscus Shape to Improve Pattern Uniformity in Drop-On-Demand EHD Inkjet Printing Using Visual Feedback
Trung Kien Nguyen
Vu Dat Nguyen
Byun, Doyoung
Park, Jungkeun
2012 12TH INTERNATIONAL CONFERENCE ON CONTROL, AUTOMATION AND SYSTEMS (ICCAS), 2012, : 392 - 394
[43] Combinatorial material library synthesis from insoluble oxide suspension using a drop-on-demand inkjet delivery system
Chen, L
Huang, SX
Bao, J
Liu, CH
Liu, WH
Gao, C
COMBINATORIAL AND ARTIFICIAL INTELLIGENCE METHODS IN MATERIALS SCIENCE II, 2004, 804 : 193 - 198
[44] Single-Cell Analysis Using Drop-on-Demand Inkjet Printing and Probe Electrospray Ionization Mass Spectrometry
Chen, Fengming
Lin, Luyao
Zhang, Jie
He, Ziyi
Uchiyama, Katsumi
Lin, Jin-Ming
ANALYTICAL CHEMISTRY, 2016, 88 (08) : 4354 - 4360
[45] Voltage Control Using Optimization-Based Method in a Digital Twin
Tran, Thien Phong
Quoc Tuan Tran
Minh Tri Le
Caire, Raphael
2024 IEEE 22ND MEDITERRANEAN ELECTROTECHNICAL CONFERENCE, MELECON 2024, 2024, : 138 - 143
[46] Surface-Enhanced Raman Scattering Detection of Ammonium Nitrate Samples Fabricated Using Drop-on-Demand Inkjet Technology
Farrell, Mikella E.
Holthoff, Ellen L.
Pellegrino, Paul M.
APPLIED SPECTROSCOPY, 2014, 68 (03) : 287 - 296
[47] OPTIMIZATION OF THE ELECTRO-MECHANICAL BEHAVIOR OF A BIMORPH PIEZOELECTRIC ACTUATOR FOR DROP-ON-DEMAND TECHNIQUES BASED ON FINITE ELEMENT METHOD
Kagerer, Markus
Heller, Benedikt
Lueth, Tim C.
Irlinger, Franz
PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, 2013, VOL 10, 2014,
[48] Learning-Based Cell Injection Control for Precise Drop-on-Demand Cell Printing
Shi, Jia
Wu, Bin
Song, Bin
Song, Jinchun
Li, Shihao
Trau, Dieter
Lu, Wen F.
ANNALS OF BIOMEDICAL ENGINEERING, 2018, 46 (09) : 1267 - 1279
[49] Learning-Based Cell Injection Control for Precise Drop-on-Demand Cell Printing
Jia Shi
Bin Wu
Bin Song
Jinchun Song
Shihao Li
Dieter Trau
Wen F. Lu
Annals of Biomedical Engineering, 2018, 46 : 1267 - 1279
[50] Performance of fluids in a silicon-based continuous inkjet printhead using asymmetric heating
Trauernicht, DP
Delametter, CN
Chwalek, JM
Jeanmaire, DL
Anagnostopoulos, C
IS&T'S NIP17: INTERNATIONAL CONFERENCE ON DIGITAL PRINTING TECHNOLOGIES, 2001, : 295 - 298

← 1 2 3 4 5 →