A comparative study between pulsed metal inert gas welding and continuous metal inert gas welding on thin Invar alloy

被引：5
|
作者：
Zhan, Xiaohong [1 ,2 ]
Meng, Yao [1 ]
Gu, Dongdong [1 ]
Wang, Huimin [2 ]
机构：
[1] Nanjing Univ Aeronaut & Astronaut, Coll Mat Sci & Technol, Nanjing 211106, Jiangsu, Peoples R China
[2] Ohio State Univ, Dept Mat Sci & Engn, Coll Engn, Columbus, OH 43210 USA
来源：
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE | 2019年 / 233卷 / 02期
关键词：
Invar36; alloy; pulsed metal inert gas welding; continuous metal inert gas welding; morphology; microstructure; mechanical properties; MECHANICAL-PROPERTIES; LASER; BEHAVIOR; FIELD; POOL;
D O I：
10.1177/0954405417748186
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The pulsed metal inert gas welding and continuous metal inert gas welding with various parameters are implemented on 2-mm-thick Invar36 alloy plates. The pulsed metal inert gas welding and continuous metal inert gas welding with the same filler metal and base metal are compared by considering the morphology, microstructure of weld seam and mechanical properties. It is indicated that the size of weld seam obtained in pulsed welding is significantly different from that in continuous welding. Meanwhile, it reveals that there is a triangle zone at the bottom of weld seam in both types of welding technology for Invar36 alloy. The microstructure in triangle zone of pulsed welding and continuous welding is focused. In addition, the essential difference between pulsed metal inert gas welding and continuous metal inert gas welding is discussed in detail by analyzing the formation mode of the droplet metal at the end of wire.
引用
收藏
页码：527 / 538
页数：12
相关论文
共 50 条
  • [21] Development of adaptive control system for alternating current pulsed metal inert gas welding parameters
    Tong, H
    Era, T
    Ueyama, T
    SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2002, 7 (06) : 408 - 412
  • [22] PARAMETERS FOR PRESSURIZED INERT GAS METAL-ARC WELDING OF ALUMINUM
    BRANDON, ED
    WELDING JOURNAL, 1970, 49 (11) : A510 - &
  • [23] Macrosegregation in the Weld Pool in Metal Inert-Gas Welding of Aluminium
    Murphy, Anthony B.
    Chen, Fiona F.
    Xiang, Junting
    Wang, Hui-Ping
    Thomas, David G.
    Feng, Yuqing
    JOURNAL OF MANUFACTURING PROCESSES, 2021, 61 : 111 - 127
  • [24] INTEGRATED RISK ESTIMATION OF METAL INERT GAS (MIG) AND METAL ACTIVE GAS (MAG) WELDING PROCESSES
    Karkoszka, T.
    Sokovic, M.
    METALURGIJA, 2012, 51 (02): : 179 - 182
  • [25] Comparative study of friction stir welding and tungsten inert gas welding of pure aluminum
    Suri, Atul
    Prashant, R. S. S.
    Raj, K. Hans
    2013 INTERNATIONAL CONFERENCE ON ENERGY EFFICIENT TECHNOLOGIES FOR SUSTAINABILITY (ICEETS), 2013,
  • [26] Effects of Filler Metal Properties on Metal Inert Gas Welding of Stainless Steels.
    Lundqvist, Berthold
    Olsson, Kjell
    Schweissen und Schneiden/Welding and Cutting, 1980, 32 (07): : 255 - 258
  • [27] METAL INERT GAS WELDING OF 2519-T87 HIGH STRENGTH ALUMINUM ALLOY
    XU Lianghong TIAN Zhiling ZHANG Xiaomu PENG Yun State Key Laboratory of Advance Steel Process and Products
    Chinese Journal of Mechanical Engineering, 2007, (04) : 32 - 35
  • [28] Mechanical properties of friction stir welding and metal inert gas welding of Al-Zn aluminum alloy joints
    Yan, Zhongjie
    Liu, Xuesong
    Fang, Hongyuan
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2017, 91 (9-12): : 3025 - 3031
  • [29] Mechanical properties of friction stir welding and metal inert gas welding of Al-Zn aluminum alloy joints
    Zhongjie Yan
    Xuesong Liu
    Hongyuan Fang
    The International Journal of Advanced Manufacturing Technology, 2017, 91 : 3025 - 3031
  • [30] A comparison study between friction stir welding and metal inert gas welding in joining similar Al-Al strips
    Dawood, Hasan I.
    Mohammed, Kahtan S.
    Rajab, Mumtaz Y.
    Ismail, Nurafifah R.
    MICRO/NANO SCIENCE AND ENGINEERING, 2014, 925 : 180 - +
12345