Characterization of Printed Circuit Board Micro-Holes Drilling Process by Accurate Analysis of Drilling Force Signal

被引：7
|
作者：
Tao, Sha [1 ]
Gao, Zhisen [1 ]
Shi, Hongyan [1 ]
机构：
[1] Shenzhen Univ, Shenzhen Key Lab Adv Mfg Technol Mold & Die, Shenzhen 518060, Peoples R China
来源：
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING | 2022年 / 23卷 / 02期
关键词：
Printed circuit board; Drilling force; Wiener filter; Cyclostationary;
D O I：
10.1007/s12541-021-00603-0
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Drilling force directly affects the micro drill life and micro hole quality in the micro hole drilling of printed circuit board (PCB). But in the micro hole drilling process, the signal-to-noise ratio (SNR) of drilling force signal is low. Drilling force signal often submerged by noise signal, these brings great difficulty to measurement during PCB drilling process. Therefore, it is urgent to improve the SNR of drilling force signal in PCB drilling process. The observed signal of drilling force is obtained by PCB micro hole drilling experiment. Based on the cyclostationary and time domain accumulation theory, the drilling force signal is quadratic filtered, and the filtering effect of the filter on the drilling force signal is evaluated. In this paper, a composite multiple filter is designed to improve the SNR of drilling force signal rapidly and efficiently (SNR increased by 11.76 dB), realize the accurate description of the PCB micro hole drilling process.
引用
收藏
页码：131 / 138
页数：8
相关论文
共 50 条
  • [41] Laser processing system for micro drilling of printed circuit boards
    Nishimae, J
    Satoh, Y
    Kojima, T
    Fukushima, T
    1ST INTERNATIONAL SYMPOSIUM ON LASER PRECISION MICROFABRICATION, 2000, 4088 : 209 - 211
  • [42] Investigation of burr formation and its influence in micro-drilling hole of flexible printed circuit board
    Li, Zhiyuan
    Zheng, Lijuan
    Wang, Chengyong
    Huang, Xin
    Xie, Jiechi
    CIRCUIT WORLD, 2020, 46 (04) : 221 - 228
  • [43] Experiments of drilling micro-holes on superalloy with thermal barrier coatings by using femtosecond laser
    Lu, Changsheng
    Duan, Wenqiang
    Wang, Kedian
    Wang, Rujia
    Tang, Zhanghan
    FERROELECTRICS, 2020, 564 (01) : 37 - 51
  • [44] Laser drilling of micro-holes with controllable taper using 355 nm nanosecond laser
    Huang, Zhenchao
    Cai, Yunping
    Zhang, Zhiwang
    Li, Nan
    Shi, Fei
    Lin, Wenxiong
    Liu, Huagang
    OPTICS AND LASER TECHNOLOGY, 2025, 181
  • [45] Accuracy and quality of micro-holes in vibration assisted micro-electro-discharge drilling of Inconel 718
    Unune, Deepak Rajendra
    Nirala, Chandrakant Kumar
    Mali, Harlal Singh
    MEASUREMENT, 2019, 135 (424-437) : 424 - 437
  • [46] Tool type and hole diameter influence in deep ultrasonic drilling of micro-holes in glass
    Schorderet, A.
    Deghilage, E.
    Agbeviade, K.
    PROCEEDINGS OF THE SEVENTEENTH CIRP CONFERENCE ON ELECTRO PHYSICAL AND CHEMICAL MACHINING (ISEM), 2013, 6 : 565 - 570
  • [47] Investigations on geometry and productivity of micro-holes in Incoloy 800 by pulsed electrolytic jet drilling
    N. K. Jain
    A. Potpelwar
    Sunil Pathak
    N. K. Mehta
    The International Journal of Advanced Manufacturing Technology, 2016, 85 : 2083 - 2095
  • [48] Application of Genetic Algorithms in the Optimization of the Drilling Path on the Printed Circuit Board
    Liu, Yucheng
    Liu, Yubin
    SPORTS MATERIALS, MODELLING AND SIMULATION, 2011, 187 : 133 - +
  • [49] Efficient heuristics for drilling route optimization in printed circuit board manufacturing
    Linn, RJ
    Liu, JY
    JOURNAL OF ELECTRONICS MANUFACTURING, 1998, 8 (02): : 127 - 138
  • [50] Design of a printed circuit board drilling machine for small batch production
    Tradel, C.
    Reckziegel, R.
    Feingeratetechnik Berlin, 1988, 37 (10): : 458 - 460
12345