Controlled fabrication of high-yield CdS nanostructures by compartment arrangement

被引:1
|
作者
Green, Joshua M. [1 ]
Lawrance, Juno [1 ]
Jiao, Jun [1 ]
机构
[1] Portland State Univ, Dept Phys, Portland, OR 97207 USA
关键词
D O I
10.1155/2008/107943
中图分类号
TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
High-yield, high-purity CdS nanostructures were synthesized in a turf-like configuration using an improved vapor-liquid-solid method. To increase the yield, a compartment arrangement was employed. The specific kind of nanostructure fabricated was found to be directly dependent on the temperature in the compartment. Along with the high-yield growth of CdS nanorods, nanowires, and nanobelts, intertwined structures were also observed, and the electron field emission property of the intertwined structures was investigated and compared with that of other type of nanostructures. Photoluminescence measurements at 10 K showed a peak emission from the CdS nanostructures at 485 nm. Copyright (c) 2008 Joshua M. Green et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
引用
收藏
页数:4
相关论文
共 50 条
  • [41] High-yield biomass charcoal
    Antal, MJ
    Croiset, E
    Dai, XF
    DeAlmeida, C
    Mok, WSL
    Norberg, N
    Richard, JR
    AlMajthoub, M
    ENERGY & FUELS, 1996, 10 (03) : 652 - 658
  • [42] HYBRIDS FOR A HIGH-YIELD ENVIRONMENT
    LAMBERT, RJ
    ILLINOIS RESEARCH, 1980, 22 (03): : 5 - 6
  • [43] YELLOWING OF HIGH-YIELD PULP
    FISCHER, K
    PAPIER, 1990, 44 (10A): : V11 - V18
  • [44] High-Yield Synthesis of Mesoscopic Conductive and Dispersible Carbon Nanostructures via Ultrasonication of Commercial Precursors
    Srivastava, Vikram K.
    Quinlan, Ronald A.
    Agapov, Alexander L.
    Kisliuk, Alexander
    Bhat, Gajanan S.
    Mays, Jimmy W.
    INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH, 2014, 53 (23) : 9781 - 9791
  • [46] Fast fabrication of High-Yield WS2 nanoscrolls via ultrasound sonication
    Alharbi, Thaar M. D.
    ARABIAN JOURNAL OF CHEMISTRY, 2024, 17 (07)
  • [47] High-yield fabrication of suspended two-dimensional materials for atomic resolution imaging
    Han, Jaehyun
    Lee, Jun-Young
    Choe, Jeongun
    Yeo, Jong-Souk
    RSC ADVANCES, 2016, 6 (80): : 76273 - 76279
  • [48] On-Wafer Graphene Devices for THz Applications Using a High-Yield Fabrication Process
    Theofanopoulos, Panagiotis C.
    Trichopoulos, Georgios C.
    2019 IEEE MTT-S INTERNATIONAL MICROWAVE SYMPOSIUM (IMS), 2019, : 1107 - 1110
  • [49] High-yield fabrication of t-Se nanowires via hydrothermal method and their photoconductivity
    Liang Cheng
    Mingwang Shao
    Dayan Chen
    Xianwen Wei
    Fengxia Wang
    Jun Hua
    Journal of Materials Science: Materials in Electronics, 2008, 19 : 1209 - 1213
  • [50] HIGH-YIELD TRIPLE -STACK BONDING FABRICATION PROCESS FOR MICROMACHINED MICROMOTORS WITH CONTACTLESS ROTOR
    Sun, Boqian
    Wang, Shunyue
    Tan, Yidong
    Han, Fengtian
    2019 20TH INTERNATIONAL CONFERENCE ON SOLID-STATE SENSORS, ACTUATORS AND MICROSYSTEMS & EUROSENSORS XXXIII (TRANSDUCERS & EUROSENSORS XXXIII), 2019, : 1627 - 1630