Temperature distribution analysis of Cu, Al and steel material heat exchangers by ANSYS

被引：3

作者：

Pal, Debabrata ^{[1
]}

Hasan, Nasim ^{[2
]}

Rao, Pabbathi Vijaya ^{[2
]}

Nagarajan ^{[2
]}

机构：

[1] Dr BC Roy Polytech, Dept Elect Engn, Durgapur, W Bengal, India

[2] Mettu Univ, Dept Mech Engn, Mettu, Oromia, Ethiopia

来源：

MATERIALS TODAY-PROCEEDINGS | 2022年 / 56卷

关键词：

Heat exchanger; ANSYS; Thermal Properties; CONDENSATION; FLOW; TUBE;

D O I：

10.1016/j.matpr.2021.09.274

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Heat exchanger (HX) is one type of device that passing the fluid medium from one place to another place which were used in different industrial application like power production plant, shipping as well as bio chemical enterprises. The aim of paper revealed making shell & tube in heat exchanger by modeling Catia latest version software. Testing of these model objects will be analyzed by software of ANSYS 13. Scope of study is to analyze the temperature distribution & heat flux inside of shell and baffles. The three important materials (Copper, aluminum & steel 1010) are changed while doing the above tastings. Lastly, copper gives best heat transfer rate comparing with other two materials But while comparing economical wise steel was desired. Copyright (C) 2022 Elsevier Ltd. All rights reserved.

引用

页码：3176 / 3185

页数：10

共 50 条

[31] Analysis of plate heat exchangers in binary flashing cycle using low-temperature heat source
Wang, Lingbao
Guo, Zhipeng
Wang, Xianlong
Gong, Yulie
Bu, Xianbiao
APPLIED THERMAL ENGINEERING, 2024, 236
[32] A comparative thermodynamic analysis of helium distribution systems with central and distributed precooling heat exchangers
Fydrych, J.
Pietrowicz, S.
27TH INTERNATIONAL CRYOGENICS ENGINEERING CONFERENCE AND INTERNATIONAL CRYOGENIC MATERIALS CONFERENCE 2018 (ICEC-ICMC 2018), 2019, 502
[33] Numerical analysis of flow distribution characteristics in large central-type heat exchangers
Xiao J.
Sun Z.
Gao L.
Chen X.
Bian H.
Harbin Gongcheng Daxue Xuebao/Journal of Harbin Engineering University, 2023, 44 (07): : 1181 - 1187
[34] ENERGY ANALYSIS OF REAR DOOR HEAT EXCHANGERS IN DATA CENTERS WITH SPATIAL WORKLOAD DISTRIBUTION
Simon, Vibin Shalom
Karajgikar, Saket
Mulay, Veerendra
Pundla, Sai Abhideep
Sivaraju, Krishna Bhavana
Gupta, Gautam
Bansode, Pratik
Agonafer, Dereje
PROCEEDINGS OF ASME 2023 INTERNATIONAL TECHNICAL CONFERENCE AND EXHIBITION ON PACKAGING AND INTEGRATION OF ELECTRONIC AND PHOTONIC MICROSYSTEMS, INTERPACK2023, 2023,
[35] Comparative analysis for the corrosion susceptibility of Cu, Al, Al-Cu and C-steel in soil solution
Noor, E. A.
MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION, 2011, 62 (08): : 786 - 795
[36] Estimation of Relative Resource Circulation for Heat Exchangers Using Material Flow Analysis for Air Conditioners
Fujii, Shoma
Oshita, Yuko
Kikuchi, Yasunori
Ohara, Satoshi
INTERNATIONAL JOURNAL OF AUTOMATION TECHNOLOGY, 2022, 16 (06) : 737 - 746
[37] Failure Analysis of Type 304 Stainless Steel Tubes in an Energy Production Plant Heat Exchangers
Jahangiri, M. R.
JOURNAL OF PRESSURE VESSEL TECHNOLOGY-TRANSACTIONS OF THE ASME, 2011, 133 (06):
[38] Exergy analysis for the choice of optimal temperature difference in recuperative heat exchangers of a cryogenic system
Dobrovicescu, Alexandru
Stanciu, Dorin
Padet, Colette
Mladin, Emilia-Cerna
Padet, Jacques
Prisecaru, Malina
UPB Scientific Bulletin, Series D: Mechanical Engineering, 2009, 71 (04): : 65 - 74
[39] DETERMINATION OF TEMPERATURE DISTRIBUTION IN LASER WELDED HEAT-EXCHANGERS WITH THE AID OF FINITE-ELEMENT METHODS
STRAUSS, A
PRETORIUS, L
OPTICS AND LASER TECHNOLOGY, 1989, 21 (06): : 381 - 387
[40] Microstructure, Mechanical Properties, and Heat Distribution ANSYS Model of CP Copper and 316 Stainless Steel Torch Brazing
Abtan, Auday Awad
Mohammed, Mohammed S.
Alshalal, Iqbal
ADVANCES IN SCIENCE AND TECHNOLOGY-RESEARCH JOURNAL, 2024, 18 (01) : 167 - 183

← 1 2 3 4 5 →