Thermal Aging Effects on the Mechanical Behavior of Glass-Fiber-Reinforced Polyphenylene Sulfide Composites

被引：12

作者：

Deng, Jiangang ^{[1
,2
]}

Song, You ^{[1
,2
]}

Xu, Zhuolin ^{[1
,2
]}

Nie, Yu ^{[1
,2
]}

Lan, Zhenbo ^{[1
,2
]}

机构：

[1] State Grid Elect Power Res Inst, Wuhan Nari Ltd Liabil Co, Wuhan 430074, Peoples R China

[2] State Grid Elect Power Res Inst, Nanjing 210000, Peoples R China

来源：

POLYMERS | 2022年 / 14卷 / 07期

关键词：

GF; PPS; thermal aging; mechanical property; color difference; POLY(PHENYLENE SULFIDE); CRYSTALLIZATION; PERFORMANCE; MEMBRANE;

D O I：

10.3390/polym14071275

中图分类号：

O63 [高分子化学（高聚物）];

学科分类号：

070305 ; 080501 ; 081704 ;

摘要：

In this article, the thermal aging behavior of polyphenylene sulfide (PPS) composites, reinforced by 20% glass fibers (GFs), in thermal aging temperatures ranging from 85 to 145 degrees C was studied. Tensile and bending properties and color changes in the thermally aged samples were investigated. The results showed that thermal aging at this temperature range resulted in the degradation of mechanical properties. Both the tensile and flexural strength of the GF/PPS composites were significantly reduced after thermal aging at 145 degrees C. Decreased strength and brittle fracture were observed because thermal aging at high temperatures resulted in the deterioration of the interfaces between the GFs and PPS matrix. The degradation of the mechanical properties of the composite samples can be reflected by the color change, which means that the mechanical properties of the GF/PPS composite samples under thermal aging are predictable using color change analysis.

引用

页数：11

共 50 条

[41] Thermal cycling, thermal aging and thermal shock behavior of nicalon-fiber reinforced glass matrix composites
Boccaccini, AR
Kern, H
Janczak-Rusch, J
Ponton, CB
Chawla, KK
HIGH TEMPERATURE CERAMIC MATRIX COMPOSITES III, 1999, 164-1 : 345 - 348
[42] Effect of air plasma treatment on the mechanical properties of polyphenylene sulfide/glass fiber cloth composites
Zhang, Shouyu
Huang, Guangshun
Wang, Xiaojun
Huang, Yajiang
Yang, Jie
Li, Guangxian
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, 2013, 32 (11) : 786 - 793
[43] The Influence of Graphene Nanoplatelets on the Tensile and Impact Behavior of Glass-Fiber-Reinforced Polymer Composites
Veerakumar, Vigneshwaran Gnanakkan Samuel
Shanmugavel, Balasivanandha Prabu
Paskaramoorthy, Ratnam
Harish, Sivasankaran
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2021, 30 (01) : 596 - 609
[44] Tensile behavior and morphology studies of glass-fiber-reinforced polymeric in situ hybrid composites
Liu, H
Liao, K
JOURNAL OF APPLIED POLYMER SCIENCE, 2004, 94 (01) : 211 - 221
[45] Effects of simultaneous hygrothermal aging and thermal shock cycling on carbon fiber-reinforced polyphenylene sulfide composite performance
Tarpani, Alessandra Cristina Soares Pozzi
Brito, Francisco Javier Goyo
Tarpani, Jose Ricardo
POLYMER COMPOSITES, 2025,
[46] Tensile behavior and morphology studies of glass-fiber-reinforced polymeric in situ hybrid composites
Liao, K. (askliao@ntu.edu.sg), 1600, John Wiley and Sons Inc. (94):
[47] The Influence of Graphene Nanoplatelets on the Tensile and Impact Behavior of Glass-Fiber-Reinforced Polymer Composites
Vigneshwaran Gnanakkan Samuel Veerakumar
Balasivanandha Prabu Shanmugavel
Ratnam Paskaramoorthy
Sivasankaran Harish
Journal of Materials Engineering and Performance, 2021, 30 : 596 - 609
[48] DRY WEAR STUDIES ON GLASS-FIBER-REINFORCED EPOXY COMPOSITES
RAMESH, R
KISHORE
RAO, RMVGK
WEAR, 1983, 89 (02) : 131 - 136
[49] Effect of silane coupling agent modification on properties of glass fiber fabric reinforced polyphenylene sulfide composites
Shao L.
Huang J.
Jin X.
Tian W.
Zhu C.
Fangzhi Xuebao/Journal of Textile Research, 2022, 43 (04): : 68 - 73
[50] Thermal and mechanical behavior of graphene loaded synthetic graphite/polyphenylene sulfide (PPS) composites
Altay, L.
Tantug, G. S.
Cekin, H.
Seki, Y.
Sarikanat, M.
HIGH TEMPERATURES-HIGH PRESSURES, 2021, 50 (06) : 451 - 468

← 1 2 3 4 5 →