B4C/SiC/Al2O3 Particle Reinforced Aluminum Sandwich Foam and Ramor 500 Armor Steel to be Combined and Investigation of the Ballistic Performance

被引：0

作者：

Karakoc, Halil ^{[1
]}

Ulutas, Aytekin ^{[2
]}

Cinici, Hanifi ^{[3
]}

机构：

[1] Hacettepe Univ, Hacettepe ASO OSB Meslek Yuksek Okulu 1, Makine Bolumu, Ankara, Turkey

[2] Balikesir Univ, Edremit Meslek Yuksekokulu, Elekt & Otomasyon Bolumu, Balikesir, Turkey

[3] Gazi Univ, Teknol Fak, Met & Malzeme Muhendisligi Bolumu, Ankara, Turkey

来源：

JOURNAL OF POLYTECHNIC-POLITEKNIK DERGISI | 2020年 / 23卷 / 02期

关键词：

Ballistic; sandwich foam; armor; NORMAL IMPACT; MANUFACTURE;

D O I：

10.2339/politeknik.527770

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

In this study, the ballistic performances of particle-free Al sandwich foams (ASK) containing SiC, B4C and Al2O3 prepared by powder metallurgy were investigated. For this purpose, the mixture powders were subjected to extrusion milling after cold pressing and sandwich foams of 50x50x20 mm(2) were produced at 690 degrees C foaming temperature. Produced sandwich foams, 50x50x7 mm(2) dimensions of ramor 500 armor steel with silicon resin was glued and the armor samples were prepared for ballistic testing. In the study, it was determined that the particle diameter which is broken from the armor steel is less in the designs where the sandwich foams are leading. In addition, ballistic collisions resulted in localized condensation and petal damage in the sandwich foams.

引用

页码：297 / 310

页数：14

共 50 条

[41] THERMAL EXPANSION OF AL2O3, BEO, MGO, B4C, SIC, AND TIC ABOVE 1000-DEGREES-C
ENGBERG, CJ
ZEHMS, EH
JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 1959, 42 (06) : 300 - 305
[42] MICROSTRUCTURAL CHARACTERIZATION AND SYNTHESIS BY MECHANOCHEMICAL METHOD OF NANO PARTICLE Al2O3/B4C CERAMIC PHASE
Gokmese, Hakan
Bostan, Bulent
JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY, 2014, 29 (02): : 289 - 297
[43] Microstructural characterization and synthesis by mechanochemical method of nano particle Al2O3/B4C ceramic phase
Nano parçacik Al2O3/B4C seramik fazinin mekanokimyasal yöntemle sentezlenmesi ve mikroyapisal karakterizasyonu
1600, Gazi Universitesi (29):
[44] Influence of the Composition and Structure of B4C - Al2O3 Ceramic on the Tribotechnical Characteristics in Friction Against Steel
Yu. G. Tkachenko
V. T. Varchenko
V. F. Britun
D. Z. Yurchenko
Powder Metallurgy and Metal Ceramics, 2005, 44 : 245 - 252
[45] An investigation of laser-assisted machining of Al2O3 particle reinforced aluminum matrix composite
Wang, Y
Yang, LJ
Wang, NJ
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2002, 129 (1-3) : 268 - 272
[46] The effect of B4C addition on the oxidation resistance of Al2O3-C AND Al2O3-SiC-C refractories
Sunayama, H
Kawahara, M
Mitsuo, T
Sumitomo, K
UNIFIED INTERNATIONAL TECHNICAL CONFERENCE ON REFRACTORIES (UNITECR 97), VOL 1 - 3: 5TH BIENNIAL WORLDWIDE CONGRESS - REFRACTORIES, A WORLDWIDE TECHNOLOGY, 1997, : 841 - 849
[47] Influence of Al2O3, SiC and B4C covalent multilayer PVD coating on surface properties of HSS rod
Manivannan, R.
Sundararaj, S.
Dheenasagar, R.
Giridharan, K.
Sivaraman, P. R.
Udhayarani, V
MATERIALS TODAY-PROCEEDINGS, 2021, 39 : 700 - 707
[48] FRICTION AND WEAR STUDIES IN N-IMPLANTED AL2O3, SIC, TIB2, AND B4C CERAMICS
NASTASI, M
KOSSOWSKY, R
HIRVONEN, JP
ELLIOTT, N
JOURNAL OF MATERIALS RESEARCH, 1988, 3 (06) : 1127 - 1133
[49] Localized corrosion currents and pH profile over B4C, SiC, and Al2O3 reinforced 6092 aluminum composites -: I.: In 0.5 m Na2SO4 solution
Ding, HB
Hihara, LH
JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 2005, 152 (04) : B161 - B167
[50] Effect of carbide on Al2O3/B4C burnable poison sintered in Ar
Huang, H. W.
Wang, X. M.
Yang, J.
Xu, K.
Dai, Sh. P.
NUCLEAR ENGINEERING AND DESIGN, 2011, 241 (12) : 4909 - 4912

← 1 2 3 4 5 →