LOAD DISTRIBUTION IN THE WORM MESHING

被引：1

作者：

Sabiniak, Henryk G. ^{[1
]}

机构：

[1] Tech Univ Lodz, Lodz, Poland

来源：

JOURNAL OF THEORETICAL AND APPLIED MECHANICS | 2016年 / 54卷 / 04期

关键词：

finite differences; circular plate; cantilever plates; worm teeth; load distribution;

D O I：

10.15632/jtam-pl.54.4.1169

中图分类号：

O3 [力学];

学科分类号：

08 ; 0801 ;

摘要：

The paper presents a theoretical analysis of deflections of circular and rectangular cantilever plates of an elastically built-in edge. The problem has been solved using the finite difference method. A method of determination of load distribution between two plates being in contact along an arbitrary line has been presented. Different shapes of these plates constitute models of mating of cylindrical and globoidal worm meshings. To verify the presented theory of searching for load distributions along the contact lines in these meshings, experimental investigations with the freezing of stresses in the cylindrical worm meshing have been carried out. Directions of investigations that would specify further theoretical considerations over load distribution in globoidal gear meshings have been indicated.

引用

页码：1169 / 1181

页数：13

共 50 条

[41] Computerised simulation of meshing and contact of double enveloping worm gears
Nathan, M.K.
Muthuveerappan, G.
Journal of the Institution of Engineers (India): Mechanical Engineering Division, 2001, 82 (OCT.): : 123 - 128
[42] Contact analysis and load distribution of double-envelop hourglass worm gearing affected by errors and load
徐戊矫
Journal of Chongqing University, 2003, (02) : 1 - 5
[43] Meshing Characteristic of Arc-Toothed Cylindrical Worm Pair and Cutting Geometric Condition of Its Worm
Meng, Qingxiang
Zhao, Yaping
Cui, Jian
Dou, Tonghao
JOURNAL OF MECHANICAL DESIGN, 2021, 143 (06)
[44] Consideration about Meshing of Worm Gear Based on MUB (Meshing Under Base-Circle) Theory for EPS
Tanaka, Yosuke
Shimizu, Yasuo
SAE INTERNATIONAL JOURNAL OF PASSENGER CARS-MECHANICAL SYSTEMS, 2014, 7 (02): : 458 - 467
[45] A STUDY ON STRENGTH OF TOOTHED BELT .4. LOAD DISTRIBUTION IN CASE OF CONSIDERING INCOMPLETE MESHING
KOYAMA, T
KAGOTANI, M
SHIBATA, T
SATO, S
HOSHIRO, T
BULLETIN OF THE JSME-JAPAN SOCIETY OF MECHANICAL ENGINEERS, 1980, 23 (181): : 1235 - 1239
[46] DIRECT DIGITAL DESIGN AND SIMULATION OF MESHING IN WORM-GEAR DRIVE
XU Wujiao QIN Datong SHI Wankai State Key Laboratory of Mechanical Transmission
Chinese Journal of Mechanical Engineering, 2006, (03) : 428 - 433
[47] Design, simulation of meshing, and contact stresses for an improved worm gear drive
Litvin, Faydor L.
Gonzalez-Perez, Ignacio
Yukishima, Kenji
Fuentes, Alfonso
Hayasaka, Kenichi
MECHANISM AND MACHINE THEORY, 2007, 42 (08) : 940 - 959
[48] Method of unequal pitch meshing of metal worm and plastic helical gear
Ren J.
Shi Z.
Wang D.
Yu S.
Beijing Hangkong Hangtian Daxue Xuebao/Journal of Beijing University of Aeronautics and Astronautics, 2022, 48 (06): : 979 - 985
[49] Meshing limit line of the conical surface enveloping conical worm pair
Meng, Qingxiang
Zhao, Yaping
Yang, Zaiyou
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 2020, 234 (02) : 693 - 703
[50] DETERMINATION OF THE MOST DANGEROUS MESHING POINT FOR MODIFIED HOURGLASS WORM DRIVES
Zhao, Yaping
Wu, Tianchao
PROCEEDINGS OF THE ASME INTERNATIONAL DESIGN ENGINEERING TECHNICAL CONFERENCES AND COMPUTERS AND INFORMATION IN ENGINEERING CONFERENCE, 2011, VOL 8, 2012, : 181 - 187

← 1 2 3 4 5 →