Rapid synthesis of Ti alloy with B addition by spark plasma sintering

被引：61
|
作者：
Feng, HB [1 ]
Zhou, Y [1 ]
Jia, DC [1 ]
Meng, QC [1 ]
机构：
[1] Harbin Inst Technol, Sch Mat Sci & Engn, Harbin 150001, Peoples R China
来源：
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2005年 / 390卷 / 1-2期
关键词：
spark plasma sintering; in situ; TiB; microstructure;
D O I：
10.1016/j.msea.2004.08.028
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
The in situ TiB/Ti-4.0Fe-7.3Mo composites were fabricated by plasma spark sintering (SPS) technique using mechanical alloying of Ti, Fe65Mo and B powder. The effects of sintering temperature on densification of the composites and microstructure of the in situ synthesized TiB were investigated using scanning electron microscope (SEM) and transmission electron microscope (TEM). A dense composite was obtained after sintering at 1000degreesC for 5 min. Under proper ball milling and SPS conditions in situ TiB reinforced Ti-4.0Fe-7.3Mo composites have been prepared. The in situ TiB showed a typical needle shape grow along [010] direction. The transverse cross-section of TiB grain is a hexagonal shape with the planes of (100), (101) and (101). The stacking faults in the (100) plane were observed in the TiB needles. (C) 2004 Elsevier B.V. All rights reserved.
引用
收藏
页码：344 / 349
页数：6
相关论文
共 50 条
  • [31] The Densification of Cu/Ti System by Spark Plasma Sintering
    张金咏
    JournalofWuhanUniversityofTechnology-MaterialsScience, 2005, (02) : 83 - 85
  • [32] The densification of Cu/Ti system by spark plasma sintering
    Zhang, JY
    Tan, TY
    Fu, ZY
    Wang, WM
    JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION, 2005, 20 (02): : 83 - 85
  • [33] Preparation of Mg−Ti system alloy and FGM with density gradient by spark plasma sintering technique
    Shen Qiang
    Zhang Lian-meng
    Tan Hua
    Jing Fu-qian
    Journal of Wuhan University of Technology-Mater. Sci. Ed., 2004, 19 (1): : 58 - 60
  • [34] Investigation of a Ti-30Zr binary alloy fabricated through spark plasma sintering
    Chavez, Jorge
    Olmos, Luis
    Jimenez, Omar
    Alvarado-Hernandez, Francisco
    Flores-Zuniga, Horacio
    Camarillo-Garcia, Juan-Pablo
    Guevara-Martinez, Santiago Jose
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2020, 9 (04): : 9328 - 9340
  • [35] Nanostructured Ti Consolidated via Spark Plasma Sintering
    Ertorer, Osman
    Topping, Troy D.
    Li, Ying
    Moss, Wes
    Lavernia, Enrique J.
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2011, 42A (04): : 964 - 973
  • [36] Synthesis, microstructure and mechanical properties of (Zr,Ti)B2-(Zr,Ti)N composites prepared by spark plasma sintering
    Hu, Chunfeng
    Sakka, Yoshio
    Tanaka, Hidehiko
    Nishimura, Toshiyuki
    Grasso, Salvatore
    JOURNAL OF ALLOYS AND COMPOUNDS, 2010, 494 (1-2) : 266 - 270
  • [37] THE INVESTIGATION OF AN Al-Zr-Ti ALLOY PREPARED BY SPARK PLASMA SINTERING OF ATOMIZED POWDER
    Molnarova, Orsolya
    Malek, Premysl
    Lukac, Frantisek
    Chraska, Tomas
    Cinert, Jakub
    METAL 2017: 26TH INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS, 2017, : 1606 - 1612
  • [38] The densification of Cu/Ti system by spark plasma sintering
    Zhang Jinyong
    Tan Tianya
    Fu Zhengyi
    Wang Weimin
    Journal of Wuhan University of Technology-Mater. Sci. Ed., 2005, 20 (2): : 83 - 85
  • [39] Nanostructured Ti Consolidated via Spark Plasma Sintering
    Osman Ertorer
    Troy D. Topping
    Ying Li
    Wes Moss
    Enrique J. Lavernia
    Metallurgical and Materials Transactions A, 2011, 42 : 964 - 973
  • [40] THE EFFECT OF SPARK PLASMA SINTERING ON THE POROSITY AND MECHANICAL PROPERTIES OF Ti-15Mo ALLOY
    Terynkova, Anna
    Kozlik, Jiri
    Bartha, Kristina
    Chraska, Tomas
    Dlabacek, Zdenek
    Strasky, Josef
    27TH INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS (METAL 2018), 2018, : 1765 - 1770
12345