Review on Laser Powder Injection Additive Manufacturing of Novel Alloys and Composites

被引：3

作者：

Zheng, B. ^{[1
]}

Yang, N. ^{[2
]}

Yee, J. ^{[2
]}

Gaiser, K. ^{[2
]}

Lu, W. Y. ^{[2
]}

Clemon, L. ^{[2
]}

Zhou, Y. ^{[1
]}

Lavernia, E. J. ^{[1
]}

Schoenung, J. M. ^{[1
]}

机构：

[1] Univ Calif Irvine, Irvine, CA 92697 USA

[2] Sandia Natl Labs, Livermore, CA 94551 USA

来源：

LASER 3D MANUFACTURING III | 2016年 / 9738卷

关键词：

Laser 3D printing; metals and alloys; composites; metallic foams; cermets; process control; thermal behavior; porosity; residual stress; WROUGHT ALUMINUM-ALLOYS; RESIDUAL-STRESSES; THERMAL-BEHAVIOR; MICROSTRUCTURE; DEPOSITION; EVOLUTION; PROGRESS;

D O I：

10.1117/12.2217909

中图分类号：

O43 [光学];

学科分类号：

070207 ; 0803 ;

摘要：

In this paper, recent research and progress associated with development of alloys and composites using LENS (R) are reviewed. The microstructure of novel materials can be tailored by controlling both composition and process parameters. For process control, closed-loop diagnostics and controls such as in-situ molten pool sensor and Z-height control subsystems are utilized, while the thermal behavior measurement with thermal imaging methods and numerical simulation are also investigated. The existing problems with residual stress and porosity in deposited materials are discussed.

引用

页数：9

共 50 条

[41] Laser additive manufacturing of copper-chromium-niobium alloys using gas atomized powder
Maischner, Dora
Fritsching, Udo
Kini, Anoop
Weisheit, Andreas
Uhlenwinkel, Volker
Schleifenbaum, Johannes Henrich
Biermann, Tim
International Journal of Materials Research, 2021, 111 (07) : 587 - 593
[42] A literature review on powder spreading in additive manufacturing
Miao, Guanxiong
Du, Wenchao
Pei, Zhijian
Ma, Chao
Additive Manufacturing, 2022, 58
[43] A literature review on powder spreading in additive manufacturing
Miao, Guanxiong
Du, Wenchao
Pei, Zhijian
Ma, Chao
ADDITIVE MANUFACTURING, 2022, 58
[44] Powder Feeding Mechanisms in Additive Manufacturing: A Review
Patil, Yogesh
Patel, Ashik Kumar
Goutam, Amisha
Chavan, Subodh
Pandya, Milan
Malaiya, Mitesh
Karunakaran, K. P.
ADVANCES IN LIGHTWEIGHT MATERIALS AND STRUCTURES, ACALMS 2020, 2020, 8 : 673 - 681
[45] On the Use of Green and Blue Laser Sources for Powder Bed Fusion: State of the Art Review for Additive Manufacturing of Copper and Its Alloys
Khandpur, Mankirat Singh
Giubilini, Alberto
Iuliano, Luca
Minetola, Paolo
METALS, 2024, 14 (12)
[46] A review of powder deposition in additive manufacturing by powder bed fusion
Avrampos, Panagiotis
Vosniakos, George-Christopher
JOURNAL OF MANUFACTURING PROCESSES, 2022, 74 : 332 - 352
[47] A review of advances in additive manufacturing and the integration of high-performance polymers, alloys, and their composites
Liu, Yanting
Sing, Swee Leong
MATERIALS SCIENCE IN ADDITIVE MANUFACTURING, 2023, 2 (03):
[48] A novel powder sheet laser additive manufacturing method using irregular morphology feedstock
Zhang, Wenyou
Coban, Asli
Sasnauskas, Arnoldas
Cai, Zhe
Gillham, Bobby
Mirihanage, Wajira
Yin, Shuo
Babu, Ramesh Padamati
Lupoi, Rocco
CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY, 2024, 52 : 26 - 35
[49] Direct Laser Additive Manufacturing of Ceramics by Powder Deposition
Odinot, Julie
Julian-Jankowiak, Aurelie
Petit, Johan
Choron, Damien
Boisselier, Didier
Thomas, Marc
THERMEC 2018: 10TH INTERNATIONAL CONFERENCE ON PROCESSING AND MANUFACTURING OF ADVANCED MATERIALS, 2018, 941 : 2178 - 2183
[50] On the selection and design of powder materials for laser additive manufacturing
Donate-Buendia, Carlos
Gu, Dongdong
Schmidt, Michael
Barcikowski, Stephan
Korsunsky, Alexander M.
Goekce, Bilal
MATERIALS & DESIGN, 2021, 204

← 1 2 3 4 5 →