Damping properties of 18Cr-10Ni stainless steel with submicrocrystalline structure

被引：14
|
作者：
Mulyukov, R [1 ]
Mikhailov, S [1 ]
Zaripova, R [1 ]
Salimonenko, D [1 ]
机构：
[1] URAL GOVT TECH INST,EKATERINBURG 620002,RUSSIA
来源：
MATERIALS RESEARCH BULLETIN | 1996年 / 31卷 / 06期
关键词：
alloys; mechanical properties; microstructure;
D O I：
10.1016/0025-5408(96)00048-7
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The samples of 18Cr-10Ni stainless steel containing a submicrocrystalline austenitic phase were processed by deformation-heat treatment. The investigations show that the internal friction and yield strength values of these samples are higher than in the steel with a coarse-grained austenitic structure, by a factor of 4 and of 5, respectively. The effect revealed is connected with both the small grain size and the non-equilibrium state of grain boundaries in the submicrocrystalline austenitic phase of the samples.
引用
收藏
页码：639 / 645
页数：7
相关论文
共 50 条
  • [21] Comparative Study on Microstructure and Properties of the Cr-Mn-Ni Stainless Steel and the Cr-Ni Stainless Steel
    Tang, Peng
    Liu, Qian-nan
    Yang, Xue-xuan
    PHYSICS OF METALS AND METALLOGRAPHY, 2022, 123 (14): : 1557 - 1565
  • [22] THE EFFECT OF MARTENSITE ON THE CORROSION PROPERTIES OF 18 CR-10 NI STEEL
    HELLER, HJ
    HERBSLEB, G
    KLEINFELD, F
    PFEIFFER, B
    WERKSTOFFE UND KORROSION-MATERIALS AND CORROSION, 1981, 32 (04): : 157 - 167
  • [23] EFFECTS OF POLARIZATION ON FAILURE IN ACIDS OF COLD-WORKED 18CR-10NI STEELS
    MCCOLLOU.IS
    SCULLY, JC
    CORROSION SCIENCE, 1969, 9 (09) : 651 - &
  • [24] The Effect of Hydrogenation on Structure and Strength Properties of Austenitic Stainless Steel Fe-18Cr-9Ni-Ti
    Astafurova, Elena G.
    Melnikov, Eugene V.
    Maier, Galina G.
    Tukeeva, Marina S.
    INTERNATIONAL CONFERENCE ON PHYSICAL MESOMECHANICS OF MULTILEVEL SYSTEMS 2014, 2014, 1623 : 23 - 26
  • [25] Effect of radiogenic helium on stainless steel 12Cr18Ni10Ti mechanical properties and hydrogen permeability
    Boitsov, I.
    Kanashenko, S.
    Causey, R.
    Denisov, E.
    Glugla, M.
    Grishechkin, S.
    Hassanein, A.
    Lebedev, B. L.
    Kompaniets, T.
    Kurdyumov, A.
    Malkov, I.
    Yukhimchuk, A.
    FUSION SCIENCE AND TECHNOLOGY, 2008, 54 (02) : 497 - 500
  • [26] CYCLIC MARTENSITIC TRANSFORMATION AND STRUCTURE OF A COMMERCIAL 18 CR-8 NI STAINLESS STEEL
    THOMAS, SR
    KRAUSS, G
    TRANSACTIONS OF THE METALLURGICAL SOCIETY OF AIME, 1967, 239 (08): : 1136 - +
  • [27] STRUCTURE AND PROPERTIES OF A 10-20-3 CR-NI-TI PRECIPITATION HARDENING AUSTENITIC STAINLESS STEEL
    ROSSI, G
    CIGNOLIN.A
    METALLURGIA ITALIANA, 1966, 58 (05): : 145 - &
  • [28] Microhardness investigation of 0Cr18Ni10Ti stainless steel welded joint
    Xu Zejian
    Li Yulong
    Li Pengzhou
    ACTA METALLURGICA SINICA, 2008, 44 (05) : 636 - 640
  • [29] PITTING CORROSION OF 18CR-8NI STAINLESS STEEL
    GREENE, ND
    STREICHER, MA
    JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 1957, 104 (06) : 393 - 394
  • [30] PITTING CORROSION OF 18CR-8NI STAINLESS STEEL
    STREICHER, MA
    JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 1956, 103 (07) : 375 - 390
12345