Synthesis of Magnetic Powder in the Sm-Fe-N System by the Reduction-Diffusion Process

被引:5
|
作者
Lee, Jung-Goo [1 ]
Kang, Seok-Won [1 ]
Park, Sang-Jun [1 ,2 ]
Oh, Yung-Woo [2 ]
Choi, Chul-Jin [1 ]
机构
[1] Korea Inst Mat Sci, Funct Mat Div, Chang Won 631831, South Korea
[2] Kyungnam Univ, Div Mat Sci & Engn, Chang Won 631701, South Korea
来源
关键词
reduction-diffusion; Sm-Fe-N; nitrogenation; magnetic powder; EARTH INTERMETALLIC COMPOUNDS; RARE-EARTH; SM2FE17; NITROGENATION; ABSORPTION;
D O I
10.3365/KJMM.2010.48.09.842
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
In the present study, the reduction-diffusion method was employed to produce Sm-Fe alloy powder. It was confirmed that the amount of unreacted alpha-Fe in Sm(2)Fe(17) matrix gradually decreased as the percentage of Sm(2)O(3) increased. Sm(2)Fe(17) single-phase powder was produced by the reduction-diffusion method with 40% excess Sm(2)O(3). The Ca and Oxygen contents of the powder were approximately 300 ppm and 1600 ppm, respectively, after washing and acid treatment By a subsequent nitrogenation, Sm(2)Fe(17)N(x). magnetic powders were produced. The coercivity of the powder increased with decreasing of the particle size by ball milling, and the highest coercivity of 2850 Oe was obtained after milling for 10 hours.
引用
收藏
页码:842 / 846
页数:5
相关论文
共 50 条
  • [41] Magnetic properties and intrinsic magnetic parameters of nanocrystalline Sm-Fe-N magnets
    Wyslocki, J. J.
    Pawlik, P.
    Kaszuwara, W.
    Leonowicz, M.
    JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, 2004, 272 : E1929 - E1930
  • [42] Production of anisotropic Sm-Fe-N magnet sheets by modified powder rolling
    Hosokawa, Akihide
    Yoneyama, Natsuki
    Nakanowatari, Isao
    Eguchi, Haruki
    Takagi, Kenta
    MATERIALS LETTERS, 2021, 294
  • [43] Bonded thin cylinder magnets using Sm-Fe-N anisotropic powder
    Ohmori, K
    Hayashi, S
    Satoh, T
    IEEE TRANSACTIONS ON MAGNETICS, 2005, 41 (10) : 3850 - 3852
  • [44] Fabrication of Cr Diffused Sm 2 Fe 17 N X Core-shell Magnetic Powders by Reduction-Diffusion Proc
    Matsuda R.
    Yarimizu K.
    Matsuura M.
    Tezuka N.
    Sugimoto S.
    Ishikawa T.
    Yoneyama Y.
    Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy, 2019, 66 (03): : 116 - 121
  • [45] Synthesis of Sm2Fe17−xSixNy magnetic powder with high coercivity through reduction–diffusion and mechanical milling process
    Li Yuping
    Zhang Yujing
    Sun Yongyang
    Zhang Yunyi
    He Jinghang
    Hu Jiangping
    Jiang Yuntao
    Journal of Materials Science: Materials in Electronics, 2023, 34
  • [46] NITROGENATION EFFECT OF REDUCTION-DIFFUSION SM2FE17 POWDERS
    LIU, TY
    CHANG, WC
    CHEN, CJ
    CHU, TY
    WU, CD
    IEEE TRANSACTIONS ON MAGNETICS, 1992, 28 (05) : 2593 - 2595
  • [47] On magnetization reversal in hard magnetic Sm-Fe-N permanent magnets
    Pawlik, P
    Wyslocki, JJ
    Baran, M
    ACTA PHYSICA POLONICA A, 2001, 100 (06) : 905 - 913
  • [48] Novel synthesis of single-crystalline TbCu7-type Sm-Fe powder by low-temperature reduction-diffusion process using molten salt
    Okada, Shusuke
    Takagi, Kenta
    JOURNAL OF RARE EARTHS, 2022, 40 (07) : 1126 - 1133
  • [49] Magnetic Properties of Sm-Fe-N/Co-B Composite Magnets Prepared by Chemical Reduction
    Saito, Tetsuji
    ADVANCES IN CONDENSED MATTER PHYSICS, 2017, 2017
  • [50] Magnetization processes in Sm-Fe-N/α-Fe nanocomposities
    Wyslocki, JJ
    Pawlik, P
    Kaszuwara, W
    Leonowicz, M
    EUROPEAN MAGNETIC MATERIALS AND APPLICATIONS, 2001, 373-3 : 409 - 412