Synthesis of Magnetic Powder in the Sm-Fe-N System by the Reduction-Diffusion Process

被引:5
|
作者
Lee, Jung-Goo [1 ]
Kang, Seok-Won [1 ]
Park, Sang-Jun [1 ,2 ]
Oh, Yung-Woo [2 ]
Choi, Chul-Jin [1 ]
机构
[1] Korea Inst Mat Sci, Funct Mat Div, Chang Won 631831, South Korea
[2] Kyungnam Univ, Div Mat Sci & Engn, Chang Won 631701, South Korea
来源
关键词
reduction-diffusion; Sm-Fe-N; nitrogenation; magnetic powder; EARTH INTERMETALLIC COMPOUNDS; RARE-EARTH; SM2FE17; NITROGENATION; ABSORPTION;
D O I
10.3365/KJMM.2010.48.09.842
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
In the present study, the reduction-diffusion method was employed to produce Sm-Fe alloy powder. It was confirmed that the amount of unreacted alpha-Fe in Sm(2)Fe(17) matrix gradually decreased as the percentage of Sm(2)O(3) increased. Sm(2)Fe(17) single-phase powder was produced by the reduction-diffusion method with 40% excess Sm(2)O(3). The Ca and Oxygen contents of the powder were approximately 300 ppm and 1600 ppm, respectively, after washing and acid treatment By a subsequent nitrogenation, Sm(2)Fe(17)N(x). magnetic powders were produced. The coercivity of the powder increased with decreasing of the particle size by ball milling, and the highest coercivity of 2850 Oe was obtained after milling for 10 hours.
引用
收藏
页码:842 / 846
页数:5
相关论文
共 50 条
  • [1] Preparation of Highly Heat-Resistant Sm-Fe-N Magnetic Powder by Reduction-Diffusion Process
    Matsuda, Ruka
    Matsuura, Masashi
    Tezuka, Nobuki
    Sugimoto, Satoshi
    Ishikawa, Takashi
    Yoneyama, Yukinobu
    MATERIALS TRANSACTIONS, 2020, 61 (11) : 2201 - 2207
  • [2] The Influence of Mechanical Milling on the Structure and Magnetic Properties of Sm-Fe-N Powder Produced by the Reduction-Diffusion Process
    Lee, Jung-Goo
    Kong, Seok-Won
    Si, Ping-Zhan
    Choi, Chul-Jin
    JOURNAL OF MAGNETICS, 2011, 16 (02) : 104 - 107
  • [3] Preparation of Mn-diffused Sm-Fe-N core-shell powder by reduction-diffusion process
    Matsuura, Masashi
    Yarimizu, Keisuke
    Osawa, Yohei
    Tezuka, Nobuki
    Sugimoto, Satoshi
    Ishikawa, Takashi
    Yoneyama, Yukinobu
    JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, 2019, 471 : 310 - 314
  • [4] Preparation of Highly Heat-Resistant Sm-Fe-N Magnetic Powder by Reduction-Diffusion Process (vol 61, pg 2201, 2020)
    Matsuda, Ruka
    Matsuura, Masashi
    Tezuka, Nobuki
    Sugimoto, Satoshi
    Ishikawa, Takashi
    Yoneyama, Yukinobu
    MATERIALS TRANSACTIONS, 2022, 63 (05) : 752 - 752
  • [5] Influence of Sm-rich Phase on Magnetic Properties of Surface Modified Sm−Fe−N Powder Prepared by Reduction-diffusion Process
    Matsuura M.
    Matsuda R.
    Tezuka N.
    Sugimoto S.
    Ishikawa T.
    Yoneyama Y.
    IEEJ Transactions on Fundamentals and Materials, 2022, 142 (07): : 335 - 340
  • [6] Magnetic properties and microstructure of Ti-doped Sm-Fe-N synthesized by reduction diffusion process
    Xi, Junhua
    Yang, Zhi
    Wang, Xiangming
    Zhang, Hongguo
    Haseeb, Muhammad
    Chen, Yuanyuan
    Nie, Xiaofeng
    Liu, Weiqiang
    Yue, Ming
    JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, 2024, 603
  • [7] Synthesis of Sm2Fe17-xSixNy magnetic powder with high coercivity through reduction-diffusion and mechanical milling process
    Yuping, Li
    Yujing, Zhang
    Yongyang, Sun
    Yunyi, Zhang
    Jinghang, He
    Jiangping, Hu
    Yuntao, Jiang
    JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS, 2023, 34 (21)
  • [8] Magnetic properties of Sm-Fe-N bulk magnets produced from Cu-plated Sm-Fe-N powder
    Saito, Tetsuji
    Deguchi, Tomoe
    Yamamoto, Hitoshi
    AIP ADVANCES, 2017, 7 (05):
  • [9] Synthesis mechanism of Sm2Fe17 alloy produced in reduction-diffusion process
    邓庚凤
    靖青秀
    王秀红
    何桂荣
    叶信宇
    Journal of Rare Earths, 2010, 28(S1) (S1) : 420 - 424
  • [10] Synthesis mechanism of Sm2Fe17 alloy produced in reduction-diffusion process
    Deng Gengfeng
    Jing Qingxiu
    Wang Xiuhong
    He Guirong
    Ye Xinyu
    JOURNAL OF RARE EARTHS, 2010, 28 : 420 - 424