Novel wireless temperature meter based on quartz tuning-fork temperature sensor

被引：0

作者：

Xu, J ^{[1
]}

Li, X ^{[1
]}

Ai, H ^{[1
]}

Li, LW ^{[1
]}

机构：

[1] Harbin Univ Sci & Technol, Coll Automat, Harbin 150080, Peoples R China

来源：

ISTM/2005: 6th International Symposium on Test and Measurement, Vols 1-9, Conference Proceedings | 2005年

关键词：

D O I：

暂无

中图分类号：

TH7 [仪器、仪表];

学科分类号：

0804 ; 080401 ; 081102 ;

摘要：

Wireless monitoring of temperature is becoming an important requirement for many industries. A novel wireless temperature instrument based on low-power and low-cost quartz tuning fork sensor has been developed for on-site monitoring the temperature. and widely used by temperature-controlled transport to determine time-temperature history during typical processes. This type of wireless temperature meter is composed of three part s: a low power consumption, high reliability, high-precision and full-digital frequency output signal quartz tuning fork sensor, an 8-bit CMOS microcontroller PIC16F877 and a radio frequency (RF) module for sending detected signals to a base station through wireless communication. All the modules are hybrid integrated in a printed circuit board (PCB) and low-power consumption below 15mW has been achieved. Experimentally, the wireless temperature meter for use the temperature from -20 degrees C to 110 degrees C with accuracies of 0.05 degrees C and with a resolution of 0.01 degrees C.

引用

页码：3749 / 3752

页数：4

共 50 条

[31] Double quartz tuning fork sensor for low temperature atomic force and scanning tunneling microscopy
Heyde, M
Kulawik, M
Rust, HP
Freund, HJ
REVIEW OF SCIENTIFIC INSTRUMENTS, 2004, 75 (07): : 2446 - 2450
[32] Application of Micromachined Quartz Tuning Fork Resonator for Temperature Sensing
Li, Xin
Ma, Jing
Xu, Hai-bo
Jia, Zhi-chao
2013 8TH ANNUAL IEEE INTERNATIONAL CONFERENCE ON NANO/MICRO ENGINEERED AND MOLECULAR SYSTEMS (IEEE NEMS 2013), 2013, : 759 - 762
[33] Study on the modal characteristic of quartz tuning-fork angular rate micro-sensor by means of FEM
Wang, Y
Sun, YN
Qin, BK
Yin, P
PROCESS CONTROL AND INSPECTION FOR INDUSTRY, 2000, 4222 : 87 - 90
[34] Measurement of silicone rubber using impedance change of a quartz-crystal tuning-fork tactile sensor
Itoh, Hideaki
Yamada, Yuuki
JAPANESE JOURNAL OF APPLIED PHYSICS PART 1-REGULAR PAPERS BRIEF COMMUNICATIONS & REVIEW PAPERS, 2006, 45 (5B): : 4643 - 4646
[35] Consideration on temperature characteristics of sensitivity in quartz tuning fork gyroscope
Kudo, S
JAPANESE JOURNAL OF APPLIED PHYSICS PART 1-REGULAR PAPERS SHORT NOTES & REVIEW PAPERS, 1998, 37 (5B): : 2872 - 2873
[36] Spring constant of a tuning-fork sensor for dynamic force microscopy
van Voerden, Dennis
Lange, Manfred
Schmuck, Merlin
Schmidt, Nico
Moeller, Rolf
BEILSTEIN JOURNAL OF NANOTECHNOLOGY, 2012, 3 : 809 - 816
[37] Development of a fast humidity sensor based on quartz tuning fork
Carullo, Alessio
Vallan, Alberto
Afify, Ahmed S.
Tulliani, J-M
2016 IEEE INTERNATIONAL INSTRUMENTATION AND MEASUREMENT TECHNOLOGY CONFERENCE PROCEEDINGS, 2016, : 285 - 290
[38] Investigation on viscoelasticity of silicone rubber using impedance change of a quartz-crystal tuning-fork tactile sensor
Itoh, H
Yamada, Y
2005 IEEE ULTRASONICS SYMPOSIUM, VOLS 1-4, 2005, : 1448 - 1451
[39] A low temperature scanning probe microscope using a quartz tuning fork
Saitoh, K.
Hayashi, K.
Shibayama, Y.
Shirahama, K.
25TH INTERNATIONAL CONFERENCE ON LOW TEMPERATURE PHYSICS (LT25), PART 1: CRYOGENIC TECHNOLOGIES AND APPLICATIONS, 2009, 150
[40] Temperature Modeling and Compensation of Double H Quartz Tuning Fork Gyroscope
Zhang Zhixiong
Feng Lihui
Sun Yu-nan
CEIS 2011, 2011, 15

← 1 2 3 4 5 →