Design of A 6-DOF Hydraulic Vehicle Driving Simulator

被引：0

作者：

Adel, Amr ^{[1
]}

Mahmoud, Mostafa ^{[1
]}

Sayed, Nada ^{[1
]}

Hisham, Omar ^{[1
]}

Ossama, Omar ^{[1
]}

Adel, Pola ^{[1
]}

Ayman, Youssef ^{[1
]}

Awad, Mohammed, I ^{[1
]}

Maged, Shady A. ^{[1
]}

Umer, Syed Muhammad ^{[2
]}

Iqbal, Hashim ^{[2
]}

Maqbool, Hafiz F. ^{[2
]}

机构：

[1] Ain Shams Univ, Fac Engn, Mechatron Dept, Cairo, Egypt

[2] Univ Engn & Technol, Mechatron & Control Engn, Faisalabad Campus, Lahore, Pakistan

来源：

PROCEEDINGS OF 2020 INTERNATIONAL CONFERENCE ON INNOVATIVE TRENDS IN COMMUNICATION AND COMPUTER ENGINEERING (ITCE) | 2020年

关键词：

Driving simulator; Parallel Kinematic Machines; Stewart Platform; Robotics;

D O I：

10.1109/itce48509.2020.9047787

中图分类号：

TP301 [理论、方法];

学科分类号：

081202 ;

摘要：

This paper describes the guideline of mechanical design and control of a 6-DOF hydraulic vehicle simulator. The key technology in a driving simulator is the real-time vehicle Dynamic simulation. The driver's interaction with the system through the Steering wheel and gas and brake pedals is captured by Logitech gaming kit. The game sends its movement signals which are converted into inputs to the underlying vehicle dynamic model. The equations of motion of the vehicle dynamic model is developed and implemented in real time, so that the actuators underneath the Stewart platform can perform the pushes or pulls that mimic various driving conditions. In the meantime, the results provide large excursions in longitudinal and lateral directions that are used to give accelerations and motions cues to the driver inside.

引用

页码：170 / 175

页数：6

共 50 条

[41] Design and Analysis of a 6-DOF Monolithic Nanopositioning Stage
Cheng, Lingli
Yu, Jianwei
Yu, Xiaofen
MEASUREMENT TECHNOLOGY AND INTELLIGENT INSTRUMENTS IX, 2010, 437 : 61 - +
[42] Optimal Design of a New 6-DOF Haptic Device
Vu Minh Hung
Na, Uhn Joo
2011 11TH INTERNATIONAL CONFERENCE ON CONTROL, AUTOMATION AND SYSTEMS (ICCAS), 2011, : 849 - 852
[43] Design and simulation analysis of 6-DOF electric platform
Li, Bin
Guo, Song
Mao, Xuyao
Cai, Biaohua
Wang, Bo
2019 INTERNATIONAL CONFERENCE ON ADVANCED ELECTRONIC MATERIALS, COMPUTERS AND MATERIALS ENGINEERING (AEMCME 2019), 2019, 563
[44] Design of a novel 6-DOF planar maglev system
Lai, Yi-Chih
Yen, Jia-Yush
JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, 2006, 304 (01) : E386 - E390
[45] The optimum design of 6-DOF isotropic parallel manipulators
Tsai, KY
Zhou, SR
JOURNAL OF ROBOTIC SYSTEMS, 2005, 22 (06): : 333 - 340
[46] Design of a new 6-dof parallel haptic device
Lee, JH
Eom, KS
Yi, BJ
Suh, IH
2001 IEEE INTERNATIONAL CONFERENCE ON ROBOTICS AND AUTOMATION, VOLS I-IV, PROCEEDINGS, 2001, : 886 - 891
[47] Workspace Analysis and Design of a 6-DOF Parallel Robot
Ciprian, Lapusan
Vistrian, Maties
Olimpiu, Hancu
PROCEEDINGS OF THE 8TH WSEAS INTERNATIONAL CONFERENCE ON RECENT ADVANCES IN SIGNAL PROCESSING, ROBOTICS AND AUTOMATION, 2009, : 337 - 340
[48] Design of 6-DOF Tomato Picking Lifting Platform
Cao, Pei
Wang, Tianchi
Zhai, Liang
Niu, Shi'ao
Liu, Li
Shi, Yinggang
AGRICULTURE-BASEL, 2022, 12 (11):
[49] A New 6-DOF Haptic Device for Teleoperation of 6-DOF Serial Robots
Minh Hung Vu
Uhn Joo Na
IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT, 2011, 60 (11) : 3510 - 3523
[50] Application of the amplitude-phase control strategy in a 6-DOF motion simulator
Ma, Jian-Ming
Huang, Qi-Tao
Cong, Da-Cheng
Ye, Zheng-Mao
Han, Jun-Wei
Harbin Gongcheng Daxue Xuebao/Journal of Harbin Engineering University, 2008, 29 (11): : 1216 - 1221

← 1 2 3 4 5 →