The effects of secondary elemental Mo or Ti addition in Al0.3CoCrFeNi high-entropy alloy on age hardening at 700°C

被引：142

作者：

Shun, Tao-Tsung ^{[1
]}

Hung, Cheng-Hsin ^{[1
]}

Lee, Che-Fu ^{[1
]}

机构：

[1] Feng Chia Univ, Dept Mat Sci & Engn, Taichung 407, Taiwan

来源：

JOURNAL OF ALLOYS AND COMPOUNDS | 2010年 / 495卷 / 01期

关键词：

High-entropy alloy; Enthalpy; Microstructure; Crystal structure; Transmission electron microscopy; MICROSTRUCTURE; BEHAVIORS; SYSTEM;

D O I：

10.1016/j.jallcom.2010.02.032

中图分类号：

O64 [物理化学（理论化学）、化学物理学];

学科分类号：

070304 ; 081704 ;

摘要：

Three FCC structured high-entropy alloys of Al0.3CoCrFeNi, Al0.3CoCrFeNiMo0.1, and Al0.3CoCrFeNiTi0.1 were synthesized in order to investigate the effects of secondary elemental Mo or Ti addition in Al-0.3 CoCrFeNi alloy on age hardening at 700 degrees C. All of the three alloys exhibited an apparent age hardening, especially when secondary elements were added. The hardness of the Al0.3CoCrFeNi alloy was increased by 65% after aging, whereas the other two alloys displayed an increase of over 80%. The Al0.3CoCrFeNi and Al0.3CoCrFeNiTi0.1 alloys were hardened by massive (Ni,Al)-rich and (Ni,Co,Ti)-rich B2 ordered precipitates, respectively. The large age hardening of the Al0.3CoCrFeNiMo0.1 alloy is attributed to the precipitation of both fine (Ni,Al)-rich phase and heavy blocky (Cr,Mo)(Co,Fe,Ni) sigma phase. (C) 2010 Elsevier B.V. All rights reserved.

引用

页码：55 / 58

页数：4

共 50 条

[21] High-entropy Al0.3CoCrFeNi alloy fibers with high tensile strength and ductility at ambient and cryogenic temperatures
Li, Dongyue
Li, Chengxin
Feng, Tao
Zhang, Yidong
Sha, Gang
Lewandowski, John J.
Liaw, Peter K.
Zhang, Yong
ACTA MATERIALIA, 2017, 123 : 285 - 294
[22] Cyclic degradation mechanisms of Al0.3CoCrFeNi high-entropy alloy under different loading rates
Luo, Rong
Wang, Bing
Wang, Qian
Yu, Jiaxin
Gao, Zhiming
MATERIALS TODAY COMMUNICATIONS, 2024, 38
[23] Structural Transformations upon Annealing of a Cold-Worked High-Entropy Al0.3CoCrFeNi Alloy
Ivanov I.V.
Emurlaev K.I.
Kuper K.E.
Safarova D.E.
Bataev I.A.
Steel in Translation, 2022, 52 (8) : 724 - 730
[24] Microstructure and mechanical properties of Al0.3CoCrFeNi high-entropy alloy joints brazed using a FeCoCrNiCu/Ti composite interlayer
Zheng, Mushi
Wu, Shaowang
Si, Xiaoqing
Gao, Jianwei
Li, Chun
Qi, Junlei
Cao, Jian
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2024, 30 : 6889 - 6896
[25] Additive manufacturing of Al0.3CoCrFeNi high-entropy alloy by powder feeding laser melting deposition
Peng, Haoping
Xie, Siyao
Niu, Pengda
Zhang, Zhijian
Yuan, Tiechui
Ren, Zhiqiang
Wang, Xiaoming
Zhao, Yang
Li, Ruidi
Journal of Alloys and Compounds, 2021, 862
[26] Characterization of hot deformation behavior of Al0.3CoCrFeNi high-entropy alloy and development of processing map
Patnamsetty, Madan
Ghosh, Sumit
Somani, Mahesh C.
Peura, Pasi
Journal of Alloys and Compounds, 2022, 914
[27] The orientation dependence of critical shear stresses in Al0.3CoCrFeNi high-entropy alloy single crystals
Kireeva, I. V.
Chumlyakov, Yu. I.
Pobedennaya, Z. V.
Vyrodova, A. V.
Kuksgauzen, I. V.
Poklonov, V. V.
Kuksgauzen, D. A.
TECHNICAL PHYSICS LETTERS, 2017, 43 (07) : 615 - 618
[28] Microstructure and Texture Evolution of Al0.3CoCrFeNi High-Entropy Alloy After Cold Rolling Deformation
Hosseinifar, Amirhossein
Dehghani, Kamran
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2024, 77 (06) : 1467 - 1479
[29] Structural Transformations upon Annealing of a Cold-Worked High-Entropy Al0.3CoCrFeNi Alloy
Ivanov, I.V.
Emurlaev, K.I.
Kuper, K.E.
Safarova, D.E.
Bataev, I.A.
Steel in Translation, 2022, 52 (08) : 724 - 730
[30] Selective Laser Melting of Al0.3CoCrFeNi High-Entropy Alloy: Printability, Microstructure, and Mechanical Properties
Peyrouzet, Florian
Hachet, Dorian
Soulas, Romain
Navone, Christelle
Godet, Stephane
Gorsse, Stephane
JOM, 2019, 71 (10) : 3443 - 3451

← 1 2 3 4 5 →