Modeling and optimization of process parameters of SiO2-Si3N4 gelcast ceramic composites using RSM

被引：0

作者：

Kandi, Kishore Kumar ^{[1
]}

Pupala, Anand ^{[1
]}

Rao, C. S. P. ^{[1
]}

机构：

[1] Natl Inst Technol, Dept Mech Engn, Warangal 506004, Andhra Prades, India

来源：

MATERIALS TODAY-PROCEEDINGS | 2017年 / 4卷 / 08期

关键词：

Gelcasting; Ceramic composite; Flexural strength; Porosity; RSM; SILICON-NITRIDE; TEMPERATURE; RESISTANCE; BEHAVIOR;

D O I：

10.1016/j.matpr.2017.07.135

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

SiO2-Si3N4 ceramic composites with high flexural strength and low porosity were fabricated using gelcasting, a near-net shape fabrication technique, by varying solid loading, Si3N4 content, monomer content and ratio of monomers. Mathematical models were developed using response surface methodology to determine the effect of the process parameters. The influence of solid loading, Si3N4 content, monomer content and monomer ratio were studied with the help of RSM using a central composite face centered design with 6 centre points on SiO2-Si3N4 ceramic composites. The optimal values for maximum flexural strength and porosity were 94.62 MPa and 41.52% respectively. (C) 2017 Elsevier Ltd. All rights reserved.

引用

页码：7981 / 7990

页数：10

共 50 条

[41] In situ formation of Si2N2O and TiN in Si3N4-based ceramic composites
Duan, RG
Roebben, G
Vleugels, J
Van der Biest, O
ACTA MATERIALIA, 2005, 53 (09) : 2547 - 2554
[42] Modeling and Optimization of EDM Process Parameters on Machining of Al 7075-B4C MMC Using RSM
Gopalakannan, S.
Senthilvelan, T.
Ranganathan, S.
INTERNATIONAL CONFERENCE ON MODELLING OPTIMIZATION AND COMPUTING, 2012, 38 : 685 - 690
[43] DIELECTRIC PROPERTIES OF POROUS Si3N4-SiO2-BN COMPOSITES
Sun, Yinbao
Zhang, Yumin
Li, Dihong
Han, Jiecai
INTERNATIONAL JOURNAL OF MODERN PHYSICS B, 2009, 23 (6-7): : 1879 - 1884
[44] Fabrication and characterization of SiO2(f)/Si3N4 composites
Liu, Yongsheng
Cheng, Laifei
Zhang, Litong
Xu, Yongdong
Liu, Yi
JOURNAL OF UNIVERSITY OF SCIENCE AND TECHNOLOGY BEIJING, 2007, 14 (05): : 454 - 459
[45] Preparation of Si3N4/SiO2 composites with pressureless sintering
Xu Chang-Ming
Wang Shi-Wei
Huang Xiao-Xian
Guo Jing-Kun
JOURNAL OF INORGANIC MATERIALS, 2006, 21 (04) : 935 - 938
[46] Optimization of process parameters in drilling of epoxy Si3N4 composite material
Gowda, B. M. Umesh
Ravindra, H. V.
Prakash, G. V. Naveen
Nishanth, P.
Ugrasen, G.
MATERIALS TODAY-PROCEEDINGS, 2015, 2 (4-5) : 2852 - 2861
[47] Optimization and modeling of betamethasone removal from aqueous solutions using a SiO2/g-C3N5@NiFe2O4 nanophotocatalyst by RSM
Neda Bagherlou
Elnaz Ghasemi
Parvin Gharbani
Mirzaagha Babazadeh
Ali Mehrizad
npj Clean Water, 7
[48] Optimization and modeling of betamethasone removal from aqueous solutions using a SiO2/g-C3N5@NiFe2O4 nanophotocatalyst by RSM
Bagherlou, Neda
Ghasemi, Elnaz
Gharbani, Parvin
Babazadeh, Mirzaagha
Mehrizad, Ali
NPJ CLEAN WATER, 2024, 7 (01)
[49] Optimization and prediction of the tribological parameters of biocompatible AZ31/Al2O3/Si3N4 metal matrix composites using CCD-RSM, MOORA and FNN models
Ajay, C. Veera
Manisekar, K.
Andrews, A.
Mohammed, K. Thoufiq
INTERNATIONAL JOURNAL OF INTERACTIVE DESIGN AND MANUFACTURING - IJIDEM, 2025,
[50] Process Parameters Optimization to Reduce the Thrust Force in CFRP Composites Drilling Using RSM and Taguchi Method
Murthy, B. R. N.
ADVANCES IN POLYMER COMPOSITES: MECHANICS, CHARACTERIZATION AND APPLICATIONS, 2019, 2057

← 1 2 3 4 5 →