Effect of Free-cutting Additives on Machining Characteristics of Austenitic Stainless Steels

被引：49

作者：

Li, Zhuang ^{[1
]}

Wu, Di ^{[2
]}

机构：

[1] Shenyang Univ Aeronaut & Astronaut, Sch Mat Sci & Engn, Shenyang 110136, Peoples R China

[2] Northeastern Univ, State Key Lab Rolling & Automat, Shenyang 110004, Peoples R China

来源：

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY | 2010年 / 26卷 / 09期

基金：

中国国家自然科学基金;

关键词：

Austenitic stainless steel; Free-cutting additives; Bismuth; Machining characteristics; Mechanical properties; CORROSION; CU; SUSCEPTIBILITY; MACHINABILITY; NI;

D O I：

10.1016/S1005-0302(10)60134-X

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The machinability tests were conducted by using a YD-21 dynamometer on a CA6161A lathe. The experiments were conducted to determine the effect of free-cutting additives on machining characteristics of austenitic stainless steels. The conventional austenitic stainless steel 1Cr18Ni9Ti (steel A) and the free cutting austenitic stainless steel (steel B) were prepared. The results have shown that machinable inclusions were composed of MnS and CuO, and they might be also Ti4C2S2. The presence of Bi in the inclusion was detected by the atom map and electro-probe microanalysis (EPMA), which might be one of the most important factors to improve the machinability of austenitic stainless steels. The cutting forces for steel B were lower than those of steel A at various cutting speeds; the abrasion depth of the flank of the tool for steel B was less than that of the steel A under the same cutting conditions. The machinability of austenitic stainless steel was visibly improved by adding free-cutting additives, such as S, Cu and Bi. Ultimate tensile, yield strength, and total elongation values of the free cutting austenitic stainless steel were improved due to the addition of these free-cutting additives.

引用

页码：839 / 844

页数：6

共 50 条

[21] DISTRIBUTION OF TELLURIUM IN FREE-CUTTING STEELS
SMITH, TB
CLAYTON, DB
NATURE, 1963, 198 (487) : 380 - &
[22] Machinability of Free-Cutting Steels.
Heinritz, M.
1973, 63 (08): : 453 - 457
[23] Application of tellurium in free-cutting steels
Shen, Ping
Yang, Qian-kun
Zhang, Dong
Wu, Yan-xin
Fu, Jian-xun
JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL, 2018, 25 (08) : 787 - 795
[24] EFFECT OF TYPE OF SULFIDE FORMATION ON MACHINABILITY OF FREE-CUTTING STEELS
RADTKE, D
SCHREIBE.D
STAHL UND EISEN, 1966, 86 (02): : 89 - &
[25] THE FORMATION OF A PROTECTIVE OXIDE LAYER IN MACHINING RESULFURIZED FREE-CUTTING STEELS AND CAST IRONS
YAMANE, Y
USUKI, H
YAN, B
NARUTAKI, N
WEAR, 1990, 139 (02) : 195 - 208
[26] High-speed machining (HSM) using circular interpolation of free-cutting steels
Smith, GT
LASER METROLOGY AND MACHINE PERFORMANCE IV, 1999, : 457 - 467
[27] CHEMICOTHERMOMECHANICAL STRENGTHENING OF FREE-CUTTING STEELS.
Lipinskii, V.V.
Muras, V.S.
Paranyushkin, O.V.
Tkachev, S.P.
Metal Science and Heat Treatment (English Translation of Metallovedenie i Termicheskaya Obrabotka, 1983, 25 (11-12): : 927 - 931
[28] Effect of Rare Earth Elements on Machining Characteristics of Austenitic Stainless Steels without Lead Addition
Li Zhuang
Wu Di
Lv Wei
Kang Shaopu
Zheng Zhen
ADVANCES ON MATERIALS ENGINEERING, 2013, 377 : 128 - +
[29] ON THE FREE-CUTTING NONMAGNETIC HIGH MANGANESE STEELS
OHTANI, H
OKADA, Y
KANBARA, S
SHIODE, S
TRANSACTIONS OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1982, 22 (08) : B244 - B244
[30] Strategies to replace lead in free-cutting steels
Subramanian, SV
Ramanujachar, K
37TH MECHANICAL WORKING AND STEEL PROCESSING CONFERENCE PROCEEDINGS, 1996, 33 : 341 - 353

← 1 2 3 4 5 →