STRUCTURAL, MECHANICAL AND TRIBOLOGICAL PROPERTIES OF SPARK PLASMA SINTERED TI6AL4V ALLOY

被引：0

作者：

Mroz, A. ^{[1
]}

Garbiec, D. ^{[1
]}

Wielowiejska-Giertuga, A. ^{[1
]}

Wisniewski, T. ^{[1
]}

Gierzynska-Dolna, M. ^{[1
]}

Martyla, A. ^{[2
]}

机构：

[1] Met Forming Inst, Poznan, Poland

[2] Cent Lab Batteries & Cells, Poznan, Poland

来源：

ARCHIVES OF METALLURGY AND MATERIALS | 2016年 / 61卷 / 02期

关键词：

Ti6Al4V alloy; spark plasma sintering; mechanical properties; friction and wear properties; HEAT-TREATMENT; MICROSTRUCTURE; BEHAVIOR;

D O I：

10.1515/amm-2016-0113

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

The influence of spark plasma sintering parameters on the structural, mechanical and tribological characteristics of the Ti6Al4V alloy, which is used as implant material in biomedical engineering, was investigated. The experimental data confirm that full density and attractive mechanical properties can be obtained using the spark plasma sintering method. Tribological tests, performed in dry conditions, allowed the authors to indicate the most suitable sintering parameters. The material characterized by the highest wear resistance was selected for further tribological testing in articulation with UHMWPE in simulated body fluids. Although the weight of the polymeric material articulating against the sintered Ti6Al4V was slightly higher compared to the UHMWPE articulating against the reference material (Ti6Al4V rod), the friction coefficient was lower.

引用

页码：665 / 670

页数：6

共 50 条

[21] The Significantly Enhanced Mechanical and Tribological Performances of the Dual Plasma Nitrided and PVD Coated Ti6Al4V Alloy
Yang, Jiaqiang
Le, Kai
Chen, Hui
Zhao, Xu
Xie, Xiaodong
Luo, Yong
Xu, Shusheng
Liu, Weiming
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, 2023, 24 (04) : 607 - 619
[22] The Significantly Enhanced Mechanical and Tribological Performances of the Dual Plasma Nitrided and PVD Coated Ti6Al4V Alloy
Jiaqiang Yang
Kai Le
Hui Chen
Xu Zhao
Xiaodong Xie
Yong Luo
Shusheng Xu
Weiming Liu
International Journal of Precision Engineering and Manufacturing, 2023, 24 : 607 - 619
[23] Tribological Behaviors of Ti6Al4V with Surface Plasma Molybdenized
Ben, Nengjun
Liang, Wenping
Ren, Beilei
Miao, Qiang
Zhang, Pingze
PHYSICAL AND NUMERICAL SIMULATION OF MATERIAL PROCESSING VI, PTS 1 AND 2, 2012, 704-705 : 1253 - 1258
[24] Densification behaviour of spark plasma sintered multiwall carbon nanotubes reinforced Ti6Al4V nanocomposites
Okoro, A. M.
Lephuthing, S. S.
Machaka, R.
Awotunde, M. A.
Olubambi, P. A.
MATERIALS TODAY-PROCEEDINGS, 2020, 28 : 450 - 454
[25] Microstructure characterization and tribological behavior of anodized ti6al4v alloy
Cely, M. M.
Toro, Alejandro
Estupinan, Hugo
Yesid Pena, Dario
INGENIERIA Y COMPETITIVIDAD, 2014, 16 (01): : 281 - 290
[26] Mechanical and tribological properties of Ti6Al4V hardened by double glow plasma hydrogen-free carbonitriding
Zhang, GH
He, ZY
Pan, JD
Zhang, PZ
Xu, Z
PRICM 5: THE FIFTH PACIFIC RIM INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS AND PROCESSING, PTS 1-5, 2005, 475-479 : 3951 - 3954
[27] An investigation into the effect of Triode Plasma Oxidation (TPO) on the tribological properties of Ti6Al4V
Banfield, S.
Wilson, J. C. Avelar-Batista
Cassar, G.
Leyland, A.
Matthews, A.
Housden, J.
SURFACE & COATINGS TECHNOLOGY, 2011, 206 (07): : 1955 - 1962
[28] Improvement of tribological properties of Ti6Al4V by nitrogen plasma immersion ion implantation
Ueda, M
Silva, MM
Otani, C
Reuther, H
Yatsuzuka, M
Lepienski, CM
Berni, LA
SURFACE & COATINGS TECHNOLOGY, 2003, 169 : 408 - 410
[29] Effects of helium implantation on microstructure and mechanical properties of Ti6Al4V alloy
Chen, Shan-Hua
Wu, Yong
Schumacher, G.
Cailiao Gongcheng/Journal of Materials Engineering, 2010, (05): : 25 - 29
[30] Microstructure and mechanical properties of selective laser melted Ti6Al4V alloy
Losertova, M.
Kubes, V.
27TH JOINT SEMINAR DEVELOPMENT OF MATERIALS SCIENCE IN RESEARCH AND EDUCATION, 2017, 266

← 1 2 3 4 5 →