Metal-ceramic composite layer formation on Al-Si alloy by laser processing

被引：0
|
作者：
Jaffar, MJM
Sastikumar, D [1 ]
Nath, AK
机构：
[1] Jamal Mohamed Coll, Dept Phys, Tiruchirappalli 620020, India
[2] Natl Inst Technol, Dept Phys, Tiruchirappalli 620015, India
[3] Ctr Adv Technol, Ind CO2 Laser Sect, Indore 452013, India
来源：
LASERS IN ENGINEERING | 2005年 / 15卷 / 3-4期
关键词：
Al-Si alloy; Ni-SiC composite; laser surface modification; needle and dendrite structures; epitaxial growth and Al2O3;
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
An Al-Si alloy was laser surface treated with Ni-SiC powders to produce a composite layer to improve its surface properties. The composite layer was formed when the coating composition of Ni-SiC was 25-75 (%wt.) and the laser processing parameters set at 2.5kW (laser power) and 0.5 m/min.(scan speed). The thickness of the composite layer was about 120 microns. The layer exhibited an average microhardness of 425 HV, which is nearly 5 times that of the Al-Si alloy substrate. The paper discusses the microhardness, microstructural and microchemical studies made on the laser treated samples.
引用
收藏
页码：267 / 283
页数：17
相关论文
共 50 条
  • [21] Direct Laser Metal Deposition of Eutectic Al-Si Alloy for Automotive Applications
    Singh, Amrinder
    Ramakrishnan, Abhishek
    Dinda, Guru Prasad
    TMS 2017 146TH ANNUAL MEETING & EXHIBITION SUPPLEMENTAL PROCEEDINGS, 2017, : 71 - 80
  • [22] The laser-cladding of Al bronze on an Al-Si alloy
    Wang, AH
    Xie, CS
    Huang, W
    Xu, CY
    RARE METAL MATERIALS AND ENGINEERING, 1997, 26 (06) : 41 - 46
  • [23] The Laser-Cladding of Al Bronze on an Al-Si Alloy
    Aihua, Wang
    Changsheng, Xie
    Wei, Huang
    Chunyan, Xu
    Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering, 1997, 26 (06):
  • [24] MECHANICAL PERFORMANCE OF METAL-CERAMIC INTERFACES PRODUCED BY LASER PROCESSING
    VANDENBURG, M
    DEHOSSON, JTM
    INTERFACE SCIENCE, 1995, 3 (02) : 107 - 118
  • [25] METAL-CERAMIC INTERFACES PRODUCED BY LASER MELT INJECTION PROCESSING
    DEHOSSON, JTM
    VANDENBURG, M
    MATERIALS AND MANUFACTURING PROCESSES, 1995, 10 (06) : 1285 - 1294
  • [26] Investigation of microstructure of laser cladding Ni-WC layer on Al-Si alloy
    G. Y. Liang
    T. T. Wong
    Journal of Materials Engineering and Performance, 1997, 6 : 41 - 45
  • [27] Metal-ceramic interfaces produced by laser melt injection processing
    De Hosson, J.Th.M., 1600, Marcel Dekker Inc, New York, NY, United States (10):
  • [28] METAL-CERAMIC FUNCTIONALLY GRADIENT MATERIAL PRODUCED BY LASER PROCESSING
    JASIM, KM
    RAWLINGS, RD
    WEST, DRF
    JOURNAL OF MATERIALS SCIENCE, 1993, 28 (10) : 2820 - 2826
  • [29] Investigation of microstructure of laser cladding Ni-WC layer on Al-Si alloy
    Liang, GY
    Wong, TT
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 1997, 6 (01) : 41 - 45
  • [30] FORMATION OF AN AMORPHOUS PHASE OF AL-SI DURING DRY WEAR OF A AL-SI/SICP COMPOSITE
    LI, XY
    TANDON, KN
    SCRIPTA METALLURGICA ET MATERIALIA, 1995, 33 (03): : 485 - 490
12345