Improvement of anodic performance of Ni by additives on solid oxide fuel cells using LaGaO3 based oxide

被引：3

作者：

Shinagawa, M ^{[1
]}

Ishihara, T ^{[1
]}

Nishiguchi, H ^{[1
]}

Takita, Y ^{[1
]}

机构：

[1] Oita Univ, Fac Engn, Dept Appl Chem, Oita 8701192, Japan

来源：

SOLID STATE IONICS: THE SCIENCE AND TECHNOLOGY OF IONS IN MOTION | 2004年

关键词：

D O I：

10.1142/9789812702586_0016

中图分类号：

O646 [电化学、电解、磁化学];

学科分类号：

081704 ;

摘要：

Effects of various additives to Ni anode on SOFC using La0.9Sr0.1Ga0.8Mg0.2O3 based oxide were investigated in this study. Among the examined additives, it was found that the addition of small amount of Fe is highly effective for increasing the anodic activity. When 5 wt% Fe was added to Ni anode, the anodic overpotential was as small as 34 mV at 873 K, 0.1A/cm(2), which is almost half of pure Ni anode. Since the estimated activation energy for anodic reaction decreased, addition of Fe to Ni seems to be effective for increasing the activity of Ni for anodic reaction. XRD measurement after power generating property suggests that added Fe was formed alloy with Ni. Consequently, this study reveals that Ni-Fe bimetal is highly active for anodic reaction of SOFCs at decreased temperature.

引用

页码：171 / 178

页数：8

共 50 条

[41] Decreased operating temperature of solid oxide fuel cells (SOFCs) by the application of LaGaO3-based oxide as electrolyte
Ishihara, T
Minami, H
Matsuda, H
Nishiguchi, H
Takita, Y
CHEMICAL COMMUNICATIONS, 1996, (08) : 929 - 930
[42] An intermediate temperature solid oxide fuel cell utilizing superior oxide ion conducting electrolyte, doubly doped LaGaO3 perovskite
T. Ishihara
M. Honda
T. Shibayama
H. Furutani
Y. Takita
Ionics, 1998, 4 : 395 - 402
[43] LaGaO3-based cermet for solid oxide fuel cell cathodes
Datta, Pradyot
Majewski, Peter
Aldinger, Fritz
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2009, 29 (08) : 1469 - 1476
[44] Microstructure and anodic properties of Ni/YSZ cermets in solid oxide fuel cells
Lee, CH
Lee, CH
Lee, HY
Oh, SM
SOLID STATE IONICS, 1997, 98 (1-2) : 39 - 48
[45] Electrochemical performance of Ni-based anodes for solid oxide fuel cells
S. Presto
A. Barbucci
M. P. Carpanese
M. Viviani
R. Marazza
Journal of Applied Electrochemistry, 2009, 39 : 2257 - 2264
[46] Electrochemical performance of Ni-based anodes for solid oxide fuel cells
Presto, S.
Barbucci, A.
Carpanese, M. P.
Viviani, M.
Marazza, R.
JOURNAL OF APPLIED ELECTROCHEMISTRY, 2009, 39 (11) : 2257 - 2264
[47] Chemical synthesis of pure and doped LaGaO3 powders of oxide fuel cells by amorphous citrate/EG method
Tas, AC
Schluckwerder, H
Majewski, P
Aldinger, F
CHEMICAL PROCESSING OF DIELECTRICS, INSULATORS AND ELECTRONIC CERAMICS, 2000, 606 : 237 - 243
[48] La0.8Sr0.2FeO3-δ as Fuel Electrode for Solid Oxide Reversible Cells Using LaGaO3-Based Oxide Electrolyte
Hosoi, Kohei
Hagiwara, Hidehisa
Ida, Shintaro
Ishihara, Tatsumi
JOURNAL OF PHYSICAL CHEMISTRY C, 2016, 120 (29): : 16110 - 16117
[49] Chemical synthesis of pure and doped LaGaO3 powders of oxide fuel cells by amorphous citrate/EG method
Tas, A.C.
Schluckwerder, H.
Majewski, P.
Aldinger, F.
Materials Research Society Symposium - Proceedings, 2000, 606 : 237 - 243
[50] Oxidative reforming of methane using solid oxide fuel cell with LaGaO3-based electrolyte
Ishihara, Tatsumi
Hiei, Yoshiko
Takita, Yusaku
Solid State Ionics, 1995, 79 : 371 - 375

← 1 2 3 4 5 →