The use of unconventional reinforcements in structures - Design aspects

被引：0
|
作者：
Jaafar, K. [1 ]
机构：
[1] Univ Wollongong, Dubai, U Arab Emirates
来源：
STRUCTURES AND ARCHITECTURE: CONCEPTS: APPLICATIONS AND CHALLENGES | 2013年
关键词：
CONCRETE BEAMS; SHEAR; CONFINEMENT; BEHAVIOR;
D O I：
暂无
中图分类号：
TU [建筑科学];
学科分类号：
0813 ;
摘要：
Common transverse reinforcement of reinforced concrete members with circular cross section consists of round ties or spirals. Its purpose in members that are not subjected to significant shear loading is to provide proper confinement for concrete, and eliminate buckling of the longitudinal reinforcement bars. If spirals are to be used as both shear enabler and confiner for reinforced concrete beams, then under combined action of moment and shear, spirals will be required to provide or contribute to proper shear resistance. Hence a proper assessment for spiral shear contribution is required. The validity of concepts which underline current methods for shear design used in design codes will be investigated in this paper especially for beams with the shear configuration used, which violates basic code rules on forming a truss. A method for evaluating the shear capacity of beams with spirals has also been proposed.
引用
收藏
页码：733 / 742
页数：10
相关论文
共 50 条
  • [11] Textile structures as reinforcements for concrete
    Wulfhorst, Burkhard
    Betonwerk und Fertigteil-Technik/Concrete Precasting Plant and Technology, 1998, 64 (03): : 133 - 138
  • [12] Experimental design of bandstop filters based on unconventional defected ground structures
    Annam, Kaushik
    Khah, Sunil Kumar
    Dooley, Steven
    Cerny, Charles
    Subramanyam, Guru
    MICROWAVE AND OPTICAL TECHNOLOGY LETTERS, 2016, 58 (12) : 2969 - 2973
  • [13] Point Supports of Cross Laminated Timber (CLT) Structures - Shear Design including Reinforcements
    Mestek, P.
    Winter, S.
    BAUINGENIEUR, 2011, 86 : 529 - 540
  • [14] UNCONVENTIONAL INTAKE STRUCTURES
    LIU, MC
    POWER ENGINEERING, 1980, 84 (03) : 63 - 65
  • [15] Concepts for textile reinforcements for timber structures
    Haller, P.
    MATERIALS AND STRUCTURES, 2007, 40 (01) : 107 - 118
  • [16] Concepts for textile reinforcements for timber structures
    P. Haller
    Materials and Structures, 2007, 40 : 107 - 118
  • [17] Technological Aspects in Fatigue Design of Metallic Structures
    Leitner, Martin
    METALS, 2023, 13 (03)
  • [18] SOME UNCONVENTIONAL ASPECTS OF IMAGERY
    GREGUSS, P
    ACTA POLYTECHNICA SCANDINAVICA-APPLIED PHYSICS SERIES, 1985, (149): : 35 - 42
  • [19] FABRICATION ASPECTS IN THE OPTIMUM DESIGN OF WELDED STRUCTURES
    FARKAS, J
    STRUCTURAL OPTIMIZATION, 1991, 3 (01): : 51 - 58
  • [20] Aspects of unconventional density waves
    Maki, K
    Dóra, B
    Virosztek, A
    HIGHLIGHTS IN CONDENSED MATTER PHYSICS, 2003, 695 : 10 - 20
12345