Evolution of microstructure and hardness in an AZ80 magnesium alloy processed by high-pressure torsion

被引:39
|
作者
Alsubaie, Saad A. [1 ]
Bazarnik, Piotr [2 ]
Lewandowska, Malgorzata [2 ]
Huang, Yi [1 ]
Langdon, Terence G. [1 ]
机构
[1] Univ Southampton, Fac Engn & Environm, Mat Res Grp, Southampton, Hants, England
[2] Warsaw Univ Technol, Fac Mat & Engn, Warsaw, Poland
基金
欧洲研究理事会;
关键词
Hardness; High-pressure torsion; Magnesium AZ80 alloy; Ultrafine grains; SEVERE PLASTIC-DEFORMATION; GRAIN-REFINEMENT; MECHANICAL-PROPERTIES; TEMPERATURE; HOMOGENEITY; ECAP; HPT; SUPERPLASTICITY; MICROHARDNESS; STRENGTH;
D O I
10.1016/j.jmrt.2015.11.006
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
An AZ80 magnesium alloy with an initial grain size of similar to 25 mu m and a hardness of Hv approximate to 63 was processed by high-pressure torsion (HPT) at room temperature for up to 10 turns under an imposed pressure of 6.0 GPa. After processing, the specimens were examined by optical microscopy and transmission electron microscopy and measurements were taken of the Vickers microhardness along diameters of the HPT discs. The results show that the grains are refined to 200 nm after 5 and 10 turns of HPT and the hardness increases to Hv 120 at an equivalent strain of similar to 30. There is a saturation condition and no further hardening at additional equivalent strains up to >200. (C) 2015 Brazilian Metallurgical, Materials and Mining Association. Published by Elsevier Editora Ltda. All rights reserved.
引用
收藏
页码:152 / 158
页数:7
相关论文
共 50 条
  • [31] Microstructure and Texture Evolution in a Magnesium Alloy During Processing by High-Pressure Torsion
    Huang, Yi
    Figueiredo, Roberto B.
    Baudin, Thierry
    Helbert, Anne-Laure
    Brisset, Francois
    Langdon, Terence G.
    MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS, 2013, 16 (03): : 577 - 585
  • [32] Microstructure and mechanical properties of AZ80 magnesium alloy sheet processed by differential speed rolling
    Huang, Xinsheng
    Suzuki, Kazutaka
    Saito, Naobumi
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2009, 508 (1-2): : 226 - 233
  • [33] The evolution of microstructure and texture of AZ80 and AZ80-LaMM magnesium alloy wheel hubs processed by single-pass radial forging
    Liao, Qiyu
    Jiang, Yanchao
    Le, Qichi
    Hu, Wenxin
    Zhou, Xiong
    Li, Dandan
    Li, Yinglong
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2023, 22 : 2473 - 2488
  • [34] Effects of solution and aging on microstructure of AZ80 magnesium alloy
    School of Materials Science and Engineering, Xi'an University of Technology, Xi'an 710048, China
    不详
    Jinshu Rechuli/Heat Treatment of Metals, 2007, 32 (10): : 6 - 10
  • [35] Effect of Sn on the microstructure evolution of AZ80 magnesium alloy during hot compression
    Jiang, Luyao
    Huang, Weijiu
    Zhang, Dingfei
    Guo, Fei
    Xue, Hansong
    Xu, Junyao
    Pan, Fusheng
    JOURNAL OF ALLOYS AND COMPOUNDS, 2017, 727 : 205 - 214
  • [36] Mechanical properties and microstructure evolution in an aluminum 6082 alloy processed by high-pressure torsion
    Ehab El-Danaf
    Megumi Kawasaki
    Magdy El-Rayes
    Muneer Baig
    Jabair Ali Mohammed
    Terence G. Langdon
    Journal of Materials Science, 2014, 49 : 6597 - 6607
  • [37] Mechanical properties and microstructure evolution in an aluminum 6082 alloy processed by high-pressure torsion
    El-Danaf, Ehab
    Kawasaki, Megumi
    El-Rayes, Magdy
    Baig, Muneer
    Mohammed, Jabair Ali
    Langdon, Terence G.
    JOURNAL OF MATERIALS SCIENCE, 2014, 49 (19) : 6597 - 6607
  • [38] Evolution of microstructure and hardness in aluminum processed by High Pressure Torsion Extrusion
    Omranpour, Babak
    Ivanisenko, Yulia
    Kulagin, Roman
    Kommel, Lembit
    Garcia Sanchez, E.
    Nugmanov, Dayan
    Scherer, Torsten
    Heczel, Anita
    Gubicza, Jeno
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2019, 762
  • [39] Microstructural and mechanical characteristics of AZ61 magnesium alloy processed by high-pressure torsion (Reprinted)
    Harai, Yosuke
    Kai, Masaaki
    Kaneko, Kenji
    Horita, Zenji
    Langdon, Terence G.
    MATERIALS TRANSACTIONS, 2008, 49 (01) : 76 - 83
  • [40] An evaluation of high temperature tensile properties for a magnesium AZ31 alloy processed by high-pressure torsion
    Huang, Y.
    Pereira, P. H. R.
    Figueiredo, R. B.
    Baudin, T.
    Helbert, A. -L.
    Brisset, F.
    Langdon, T. G.
    LETTERS ON MATERIALS-PIS MA O MATERIALAKH, 2015, 5 (03): : 341 - 346