Effect of quenching rate on microstructure and stress corrosion cracking of 7085 aluminum alloy

被引：76
|
作者：
Chen Song-yi [1 ]
Chen Kang-hua [1 ]
Peng Guo-sheng [1 ]
Liang Xin [1 ]
Chen Xue-hai [1 ]
机构：
[1] Cent S Univ, State Key Lab Powder Met, Changsha 410083, Peoples R China
来源：
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA | 2012年 / 22卷 / 01期
基金：
中国国家自然科学基金;
关键词：
7085 aluminum alloy; quenching rate; microstructure; stress corrosion cracking; ZN-MG ALLOY; HYDROGEN EMBRITTLEMENT; SCC-RESISTANCE; STRENGTH; AA7050; RETROGRESSION; TOUGHNESS;
D O I：
10.1016/S1003-6326(11)61138-2
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
The influence of quenching rate on microstructure and stress corrosion cracking (SCC) of 7085 aluminum alloy was investigated by tensile test, slow strain rate test (SSRT), combined with scanning electron microscopy (SEM), transmission electron microscopy (TEM) and electrochemical test. The results show that with decreasing the quenching rate, the size and inter-particle distance of the grain boundary precipitates as well as precipitation free zone width increase, but the copper content of grain boundary precipitates decreases. The SCC resistance of the samples increases first and then decreases, which is attributed to the copper content, size and distribution of grain boundary precipitates.
引用
收藏
页码：47 / 52
页数：6
相关论文
共 50 条
  • [41] Effects of hot deformation on microstructure evolution, hardness, and intergranular corrosion of 7085 aluminum alloy sheets
    Wu, Jiangjing
    Kai, Xizhou
    Guan, Chuang
    Cao, Rui
    Zhao, Yutao
    KOVOVE MATERIALY-METALLIC MATERIALS, 2023, 61 (02): : 69 - 80
  • [42] Stress corrosion cracking of superplastically formed 7475 aluminum alloy
    Tsai, TC
    Chang, JC
    Chuang, TH
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1997, 28 (10): : 2113 - 2121
  • [43] Stress corrosion cracking of superplastically formed 7475 aluminum alloy
    T. C. Tsai
    J. C. Chang
    T. H. Chuang
    Metallurgical and Materials Transactions A, 1997, 28 : 2113 - 2121
  • [44] Atmospheric stress corrosion cracking of a superplastic 7475 aluminum alloy
    Tsai, TC
    Chuang, TH
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1996, 27 (09): : 2617 - 2627
  • [45] STRESS-CORROSION CRACKING OF 7004 ALUMINUM-ALLOY
    YANNACOPOULOS, S
    CHATURVEDI, MC
    CIM BULLETIN, 1984, 77 (866): : 49 - 49
  • [46] Stress corrosion cracking of superplastically formed 7475 aluminum alloy
    Tsai, T.C.
    Chang, J.C.
    Chuang, T.H.
    Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 1997, 28 A (10): : 2113 - 2121
  • [47] OBSERVATIONS ON INITIATION OF STRESS CORROSION CRACKING IN ALUMINUM ALLOY 7039
    HELFRICH, WJ
    CORROSION, 1968, 24 (12) : 423 - &
  • [48] THE EFFECT OF LOADING MODE ON THE STRESS-CORROSION CRACKING OF ALUMINUM-ALLOY 5083
    PICKENS, JR
    GORDON, JR
    GREEN, JAS
    METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1983, 14 (05): : 925 - 930
  • [49] Effect of pre-deformation on the stress corrosion cracking susceptibility of aluminum alloy 2519
    Li Huizhong
    Zhang Xinming
    Chen Mingan
    Li Yanfang
    Liang Xiaopeng
    RARE METALS, 2007, 26 (04) : 385 - 390
  • [50] EFFECT OF BENDING STRAIN ON STRESS-CORROSION CRACKING OF 7475 ALUMINUM-ALLOY
    NAGAOKA, K
    NASU, T
    ISANO, T
    IKEDA, K
    JOURNAL OF THE JAPAN INSTITUTE OF METALS, 1988, 52 (03) : 272 - 278
12345