Effect of Initial Microstructure on Properties of Cryorolled Al 5052 Alloy Subjected to Different Annealing Treatment Temperatures

被引:10
|
作者
Anas, N. M. [1 ]
Dhindaw, B. K. [2 ]
Zuhailawati, H. [1 ]
Abdullah, T. K. [1 ]
Anasyida, A. S. [1 ]
机构
[1] Univ Sains Malaysia, Sch Mat & Mineral Resources Engn, Struct Niche Area, Engn Campus, Nibong Tebal 14300, Pulau Pinang, Malaysia
[2] IIT Bhubaneswar, Sch Minerals Met & Mat Engn, Bhubaneswar 751007, Orissa, India
关键词
Al; 5052; alloy; annealing; corrosion; cryorolling; strength; MG-SI ALLOY; MECHANICAL-PROPERTIES; CORROSION BEHAVIOR; GRAIN-SIZE; ROLLING TEMPERATURE; HIGH-STRENGTH; DUCTILITY; DEFORMATION; RESISTANCE; CU;
D O I
10.1007/s11665-018-3645-7
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Al 5052 alloy sheets were subjected to different pre-annealing temperatures (150, 200, 250, 300, and 350 degrees C) prior to cryorolling. The process resulted in Al 5052 alloys with different initial microstructures. The pre-annealed alloy sheets were compared with a cryorolled sample not subjected to pre-annealing. The thicknesses of the alloy samples after cryorolling was reduced by 30%. The pre-annealed cryorolled samples exhibited low crystallite size, and high lattice strain. Among them, the cryorolled sample pre-annealed at 300 degrees C had the lowest crystallite size, and the highest lattice strain. Changes in initial microstructure of this sample resulted in a significant improvement in its hardness (88Hv), tensile strength (333MPa), and corrosion resistance. The sample had the highest corrosion resistance among the cryorolled samples.
引用
收藏
页码:6206 / 6217
页数:12
相关论文
共 50 条
  • [1] Effect of Initial Microstructure on Properties of Cryorolled Al 5052 Alloy Subjected to Different Annealing Treatment Temperatures
    N. M. Anas
    B. K. Dhindaw
    H. Zuhailawati
    T. K. Abdullah
    A. S. Anasyida
    Journal of Materials Engineering and Performance, 2018, 27 : 6206 - 6217
  • [2] Effect of Post Annealing Temperatures on Microstructures and Mechanical Properties of Cryorolled 5052 Aluminium Sheet Alloy
    Anas, N. M.
    Umar, Z. A. A.
    Zuhailawati, H.
    Anasyida, A. S.
    PROCEEDING OF THE 3RD INTERNATIONAL CONFERENCE OF GLOBAL NETWORK FOR INNOVATIVE TECHNOLOGY 2016 (3RD IGNITE-2016): ADVANCED MATERIALS FOR INNOVATIVE TECHNOLOGIES, 2017, 1865
  • [3] The effect of initial aging treatment on the microstructure and mechanical properties of cryorolled 6016 Al alloy
    Chen, X. P.
    Mei, L.
    Chen, D.
    Bao, Z. L.
    Liu, Q.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2016, 667 : 311 - 316
  • [4] Effect of annealing on microstructure and properties of Er modified 5052 alloy
    Wang Jinlian
    Xu Jun
    Pan Feng
    RESULTS IN PHYSICS, 2018, 10 : 476 - 480
  • [5] Microstructure, mechanical and corrosion properties of cryorolled-AA5052 at various solution treatment temperatures
    Anas, N. M.
    Abioye, T. E.
    Anasyida, A. S.
    Dhindaw, B. K.
    Zuhailawati, H.
    Ismail, Azzura
    MATERIALS RESEARCH EXPRESS, 2020, 7 (01):
  • [6] Influence of Initial Microstructure on Microstructural Stability and Mechanical Behavior of Cryorolled A356 Alloy Subjected to Annealing
    R. J. Immanuel
    S. K. Panigrahi
    Metallurgical and Materials Transactions A, 2017, 48 : 3852 - 3868
  • [7] Characterization of mechanical and corrosion properties of cryorolled Al 1100 alloy: Effect of annealing and solution treatment
    Zakaria, S. A.
    Anasyida, A. S.
    Zuhailawati, H.
    Dhindaw, B. K.
    Jabit, N. A.
    Ismail, A.
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2021, 31 (10) : 2949 - 2961
  • [8] Influence of Initial Microstructure on Microstructural Stability and Mechanical Behavior of Cryorolled A356 Alloy Subjected to Annealing
    Immanuel, R. J.
    Panigrahi, S. K.
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2017, 48A (08): : 3852 - 3868
  • [9] Effect of Ga on the microstructure and properties of NiCoV alloy at different annealing temperatures
    Jin Li
    Peng Wang
    Lvxing Chen
    Meifeng He
    Jun Cheng
    ProgressinNaturalScience:MaterialsInternational, 2024, 34 (02) : 408 - 419
  • [10] Effect of Ga on the microstructure and properties of NiCoV alloy at different annealing temperatures
    Li, Jin
    Wang, Peng
    Chen, Lvxing
    He, Meifeng
    Cheng, Jun
    PROGRESS IN NATURAL SCIENCE-MATERIALS INTERNATIONAL, 2024, 34 (02) : 408 - 419