Simulation of burr formation during machining: case study

被引：0
|
作者：
Zebala, Wojciech [1 ]
Rumian, Ksenia [1 ]
机构：
[1] Cracow Univ Technol, Prod Engn Inst, Al Jana Pawla 2 37, PL-31864 Krakow, Poland
来源：
PHOTONICS APPLICATIONS IN ASTRONOMY, COMMUNICATIONS, INDUSTRY, AND HIGH-ENERGY PHYSICS EXPERIMENTS 2018 | 2018年 / 10808卷
关键词：
burr; machining; modelling; simulation;
D O I：
10.1117/12.2501536
中图分类号：
O43 [光学];
学科分类号：
070207 ; 0803 ;
摘要：
Paper presents some aspects of modeling and simulation of machining focusing on the burr formation in the last phase of the chip creation in the aluminum and titanium alloys. Researches concern the temperature and strain fields distributions in the cutting zone. Finite element method was applied in the numerical calculations basing on the Lagrange' equation.
引用
收藏
页数：8
相关论文
共 50 条
  • [31] Burr Minimization Strategies in Machining Operations
    Biermann, D.
    Heilmann, M.
    BURRS - ANALYSIS, CONTROL AND REMOVAL: PROCEEDINGS OF THE CIRP INTERNATIONAL CONFERENCE ON BURRS, 2009, 2010, : 13 - 20
  • [32] Analytical modeling of Poisson burr formation in the machining of Al6061 with interface constraint
    Li, Pengchao
    Wang, Chengxin
    Zeng, Lingqi
    Liu, Haibo
    Wang, Yongqing
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2023, 129 (1-2): : 353 - 374
  • [33] Multiphysics simulation of plasma channel formation during micro-electrical discharge machining
    Raza, Sohaib
    Nirala, Chandrakant Kumar
    AIP ADVANCES, 2021, 11 (02)
  • [34] Simulation and Experimental Study on Surface Formation Mechanism in Machining of SiCp/Al Composites
    Du, Jinguang
    Zhang, Haizhen
    He, Wenbin
    Ma, Jun
    Ming, Wuyi
    Cao, Yang
    APPLIED COMPOSITE MATERIALS, 2019, 26 (01) : 29 - 40
  • [35] Simulation and Experimental Study on Surface Formation Mechanism in Machining of SiCp/Al Composites
    Jinguang Du
    Haizhen Zhang
    Wenbin He
    Jun Ma
    Wuyi Ming
    Yang Cao
    Applied Composite Materials, 2019, 26 : 29 - 40
  • [36] Modeling and Simulation of Burr Formation: State-of-the-Art and Future Trends
    Leopold, J.
    Wohlgemuth, R.
    BURRS - ANALYSIS, CONTROL AND REMOVAL: PROCEEDINGS OF THE CIRP INTERNATIONAL CONFERENCE ON BURRS, 2009, 2010, : 79 - +
  • [37] Finite element simulation for burr formation near the exit of orthogonal cutting
    W. J. Deng
    W. Xia
    Y. Tang
    The International Journal of Advanced Manufacturing Technology, 2009, 43 : 1035 - 1045
  • [38] A Brief Review of White Layer Formation in Hard Machining with a Case Study
    Rajbongshi, Sanjib Kr
    Sarma, D. K.
    Singh, Meinam Annebushan
    ADVANCES IN MECHANICAL ENGINEERING, ICRIDME 2018, 2020, : 407 - 417
  • [39] Study on Theory of Cutting Edge Modeling and Helical Groove Machining of Nose Burr
    刘井玉
    刘华明
    Journal of Harbin Institute of Technology, 1998, (04) : 19 - 22
  • [40] Fundamental study of exit burr formation mechanisms during orthogonal cutting of AlSi aluminium alloy
    Regnier, Tristan
    Fromentin, Guillaume
    Marcon, Bertrand
    Outeiro, Jose
    D'Acunto, Alain
    Crolet, Arnaud
    Grunder, Timothee
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2018, 257 : 112 - 122
12345