Effect of joint line remnant on fatigue lifetime of friction stir welded Al-Cu-Li alloy

被引：38
|
作者：
Le Jolu, T. [1 ]
Morgeneyer, T. F. [1 ]
Gourgues-Lorenzon, A. F. [1 ]
机构：
[1] MINES ParisTech, Ctr Mat, CNRS, UMR 7633, F-91003 Evry, France
来源：
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING | 2010年 / 15卷 / 08期
关键词：
Friction stir welding; Fatigue; Joint line remnant; Al-Cu-Li; RESIDUAL-STRESS; KISSING-BOND; CRACK GROWTH; MICROSTRUCTURE; PROPERTY; BEHAVIOR;
D O I：
10.1179/136217110X12813393169453
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The effect of joint line remnant (JLR) on the fatigue lifetime of friction stir welds of a 2198 Al alloy in T851 condition has been assessed experimentally. The base material, sound welds (welded in one sheet) and welds with JLR (produced via welding of two sheets with a natural oxide layer) have been investigated. A strong decrease in microhardness is found for the weak weld zone that is consistent with the reduction in tensile properties compared to the base material: 45% in yield strength and 22% in ultimate tensile strength. The fatigue strengths of sound and JLR bearing welds at 100 000 cycles (R=0.1) are reduced by 10 and 15% respectively compared to the base material. Only for one-third of the JLR bearing specimens, the fatigue crack initiated in regions close to the JLR and this without reduction in fatigue lifetime.
引用
收藏
页码：694 / 698
页数：5
相关论文
共 50 条
  • [21] Microstructural evolution and mechanical performance of Al-Cu-Li alloy joined by friction stir welding
    Naumov, Anton
    Isupov, Fedor
    Rylkov, Evgenii
    Polyakov, Pavel
    Panteleev, Mikhail
    Skupov, Aleksey
    Amancio-Filho, Sergio T.
    Panchenko, Oleg
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2020, 9 (06): : 14454 - 14466
  • [22] Microstructure Evolution and Mechanical Properties of Friction Stir Welded Al–Cu–Li Alloy
    Peng Chen
    Wenhao Chen
    Jiaxin Chen
    Zhiyu Chen
    Yang Tang
    Ge Liu
    Bensheng Huang
    Zhiqing Zhang
    Acta Metallurgica Sinica (English Letters), 2024, 37 : 855 - 871
  • [23] Fatigue properties of friction stir welded joint of titanium alloy
    Gao, Fuyang
    Guo, Yufan
    Yang, Shengli
    Yu, Yan
    Yu, Wei
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2020, 793
  • [24] Influence of Friction Stir Processing Parameters on the Mechanical and Corrosion Properties of Al-Cu-Li Alloy
    Periasamy, Sandeep Ramasamy
    Ramalingam, Vaira Vignesh
    Vijayakumar, Ajay
    Senthilkumaran, Harie Harran
    Sajja, VyomaTeja
    Ramasamy, Padmanaban
    Sureshkumar, Samuel Ratna Kumar Paul
    IRANIAN JOURNAL OF MATERIALS SCIENCE AND ENGINEERING, 2023, 20 (02) : 1 - 14
  • [25] Effect of zigzag line on the mechanical properties of friction stir welded joints of an Al-Cu alloy
    Liu, HJ
    Chen, YC
    Feng, JC
    SCRIPTA MATERIALIA, 2006, 55 (03) : 231 - 234
  • [26] Sub-zero Temperature Dependence of Tensile Response of Friction Stir Welded Al-Cu-Li (AA2198) Alloy
    Nayan, Niraj
    Yadava, Manasij
    Gurao, Nilesh P.
    Murty, S. V. S. Narayana
    Mahesh, Sivasambu
    Prasad, M. J. N. V.
    Samajdar, I.
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2020, 51 (03): : 1173 - 1182
  • [27] Sub-zero Temperature Dependence of Tensile Response of Friction Stir Welded Al-Cu-Li (AA2198) Alloy
    Niraj Nayan
    Manasij Yadava
    Nilesh P. Gurao
    S. V. S. Narayana Murty
    Sivasambu Mahesh
    M. J. N. V. Prasad
    I. Samajdar
    Metallurgical and Materials Transactions A, 2020, 51 : 1173 - 1182
  • [28] Microstructural characterization and mechanical performance of Al-Cu-Li alloy electron beam welded joint
    Zhao, Li
    Wang, Shaogang
    Jin, Yang
    Chen, Yuan
    AEROSPACE SCIENCE AND TECHNOLOGY, 2018, 82-83 : 61 - 69
  • [29] Microstructures and properties of friction-stir welded joint of 2195 Al-Li alloy
    Shu B.
    Guo X.-M.
    Zhang C.-X.
    Hangkong Cailiao Xuebao/Journal of Aeronautical Materials, 2010, 30 (04): : 12 - 15
  • [30] Mechanical behavior of periodical microstructure induced by friction stir welding on Al-Cu-Li 2050 alloy
    Dhondt, Matthieu
    Aubert, Isabelle
    Saintier, Nicolas
    Olive, Jean-Marc
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2015, 644 : 69 - 75
12345