FLOW PATTERN, HEAT TRANSFER AND PRESSURE DROP BEHAVIORS OF MICRO-CHANNEL FLOW BOILING

被引：0

作者：

Saisorn, Sira ^{[1
]}

Srithumkhant, Pochai ^{[2
]}

Wongpromma, Pakorn ^{[2
]}

Suchatawat, Maturose ^{[2
]}

Wongwises, Somchai ^{[2
]}

机构：

[1] King Mongkuts Inst Technol Ladkrabang, Dept Mech Engn, Prince Chumphon Campus, Chumphon, Thailand

[2] King Mongkuts Inst Technol Ladkrabang, Fac Engn, Dept Mech Engn, Bangkok, Thailand

来源：

PROCEEDINGS OF THE ASME 16TH INTERNATIONAL CONFERENCE ON NANOCHANNELS, MICROCHANNELS, AND MINICHANNELS, 2018 | 2016年

关键词：

PERFORMANCE; ORIENTATION; DIAMETER; R-134A; SINK;

D O I：

暂无

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

Two-phase flow of R-134a with high confinement number was experimentally carried out in this study. Flow boiling conditions for different orientations were controlled to take place in a stainless steel tube having a diameter of 0.5 mm. Based on a saturation pressure of 8 bar, a heat flux range of 2-26 kW/m(2), and a mass flux range of 610-815 kg/m(2)s, a constant surface heat flux condition was controlled by applied DC power supply on the test section. The flow behaviors were described based on flow pattern and pressure drop data while heat transfer mechanisms were explained by using heat transfer coefficient data. In this work, nucleate boiling was observed, and the importance of the change in the flow direction was neglected, corresponding to the confinement number of around 1.7.

引用

页数：6

共 50 条

[41] Experimental Investigation on Flow Boiling Heat Transfer of R141b in Circular Micro-Channel Heat Sinks
Zhang Z.-W.
Xu W.-D.
Liu C.
Fu D.-J.
Zhou Z.-H.
Tuijin Jishu/Journal of Propulsion Technology, 2019, 40 (06): : 1363 - 1369
[42] Experimental and computational investigation of flow development and pressure drop in a rectangular micro-channel
Qu, WL
Mudawar, I
Lee, SY
Wereley, ST
JOURNAL OF ELECTRONIC PACKAGING, 2006, 128 (01) : 1 - 9
[43] Study on Flow Boiling Heat Transfer and Two-Phase Flow Pressure Drop in Flat Mini-Channel
Koizumi, Yasuo
Ohtake, Hiroyasu
Sato, Ken
ICONE17, VOL 4, 2009, : 403 - 410
[44] A heat transfer model for evaporation of coalescing bubbles in micro-channel flow
Consolini, L.
Thome, J. R.
INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW, 2010, 31 (01) : 115 - 125
[45] A micro-channel flow and heat transfer study by lattice Boltzmann method
Yang, R
Wang, CS
FIRST INTERNATIONAL CONFERENCE ON MICROCHANNELS AND MINICHANNELS, 2003, : 397 - 404
[46] The Numerical Simulation on Heat Transfer and Flow Characteristics of Rectangular Micro-Channel
Liu, Yibing
2010 INTERNATIONAL CONFERENCE ON INFORMATION, ELECTRONIC AND COMPUTER SCIENCE, VOLS 1-3, 2010, : 1215 - 1219
[47] Universal approach to predicting two-phase frictional pressure drop for mini/micro-channel saturated flow boiling
Kim, Sung-Min
Mudawar, Issam
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2013, 58 (1-2) : 718 - 734
[48] PRESSURE DROP AND TWO PHASE FLOW DURING BOILING OF FC-72 IN A HIGH ASPECT RATIO MICRO-CHANNEL
Wang, Yuan
Sefiane, Khellil
Bennacer, Rachid
PROCEEDINGS OF THE ASME INTERNATIONAL HEAT TRANSFER CONFERENCE - 2010, VOL 1: BIO HEAT TRANSFER, BOILING HEAT TRANSFER, COMPUTATIONAL HEAT TRANSFER, 2010, : 727 - 734
[49] Flow boiling heat transfer and pressure drop in stepped fin microchannels
Balasubramanian, K.
Lee, P. S.
Teo, C. J.
Chou, S. K.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2013, 67 : 234 - 252
[50] Experimental and numerical study of evaporating flow heat transfer in micro-channel
Lee, Hoki
Richards, C. D.
Richards, R. F.
INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION 2007, VOL 11 PT A AND PT B: MICRO AND NANO SYSTEMS, 2008, : 447 - 455

← 1 2 3 4 5 →