NiAl/Ni3Al-Al2O3composite formation by reactive ball milling

被引：16

作者：

Wieczorek-Ciurowa, K ^{[1
]}

Gamrat, K ^{[1
]}

机构：

[1] Krakow Tech Univ, Inst Inorgan Chem & Technol, PL-31155 Krakow, Poland

来源：

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY | 2005年 / 82卷 / 03期

关键词：

aluminides; aluminium; high-energy ball milling; in situ reactions; mechanical alloying; nanocomposite; Ni-Al intermetallics; Ni-hydroxycarbonate;

D O I：

10.1007/s10973-005-0955-4

中图分类号：

O414.1 [热力学];

学科分类号：

摘要：

It has been presented that the bulk mechanical alloying occurring in the Ni-hydroxycarbonate-aluminium mixture can produce homogeneously refined composite of nickel aluminides with aluminium oxide. The control of mechanochemical phenomenon was carried out by phase identification of milling products as well as their structural and morphological characterization. As a result the thermoanalytical and X-ray powder diffraction measurements as well as scanning electron microscopy with backscattered electron images (BSE) and X-ray energy dispersive spectroscopy (EDS) were applied. It was found that the kinetics of mechanochemical reactions depends on the chemical nature of initial salt.

引用

页码：719 / 724

页数：6

共 50 条

[21] Synthesis of Al2O3-TiC by reactive milling
Pallone, EMJA
Tomasi, R
Botta, WJ
METASTABLE, MECHANICALLY ALLOYED AND NANOCRYSTALLINE MATERIALS, PTS 1 AND 2, 2000, 343-3 : 393 - 398
[22] The effect of Al2O3 addition on the milling behavior of NiAl powder
Tuan, WH
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 1998, 7 (05) : 613 - 616
[23] Synthesis of in-situ NiAl-Al2O3 nanocomposite by reactive milling and subsequent heat treatment
Udhayabanu, V.
Ravi, K. R.
Vinod, V.
Murty, B. S.
INTERMETALLICS, 2010, 18 (03) : 353 - 358
[24] Crystallite size and lattice strain determination of NiAl-Al2O3 nanocomposite obtained by reactive milling
Oleszak, D
Olszyna, A
APPLIED CRYSTALLIGRAPHY, 2004, : 39 - 42
[25] The effect of Al2O3 addition on the milling behavior of NiAl powder
W. H. Tuan
Journal of Materials Engineering and Performance, 1998, 7 : 613 - 616
[26] Formation of γ′-Ni3Al via the peritectoid reaction:: γ+β (+Al2O3) = γ′(+Al2O3)
Copland, Evan
SUPERALLOYS 2008, 2008, : 671 - 679
[27] Synthesis of NiAl/Al2O3 Composite by Thermite Method
刘银
闵凡飞
张明旭
安徽理工大学学报(自然科学版), 2009, (04) : 39 - 41
[28] Fabrication of Al/A206-Al2O3 nano/micro composite by combining ball milling and stir casting technology
Tahamtan, S.
Halvaee, A.
Emamy, M.
Zabihi, M. S.
MATERIALS & DESIGN, 2013, 49 : 347 - 359
[29] The formation of Al2O3-layers on Ni3Al(111)
Rosenhahn, A
Schneider, J
Becker, C
Wandelt, K
APPLIED SURFACE SCIENCE, 1999, 142 (1-4) : 169 - 173
[30] Sintering Behavior and Mechanical Properties of NiAl, Al2O3, and NiAl-Al2O3 Composites
M. Chmielewski
S. Nosewicz
K. Pietrzak
J. Rojek
A. Strojny-Nędza
S. Mackiewicz
J. Dutkiewicz
Journal of Materials Engineering and Performance, 2014, 23 : 3875 - 3886

← 1 2 3 4 5 →